Reference: RBD-2182

3D Printer Nozzle M7 Thread Brass 1.75mm

Filament Support: 1.75mm Material: High-quality brass Color: Brass color Screw outer diameter: M7 If you are not sure which Nozzle size to choose, Please check our guide in the documentation tab below. 

Reference: RBD-1391

Flexible TPU Filament Plastic For 3D Printer 1.75mm1KG/Roll

TPU rubber based Material. Very flexible and elastic. Shore A Hardness at 87A. Tensile Strength 52 MPa.

Reference: RBD-1392

Sunlu PETG 3D Printer Filament 1.75mm 1kg-Roll

PETG Filament Plastic For 3D Printer 1.75mm1KG/Roll Compatible with Anycubic, Creality. Temperature: 205-230 °C Bed Temperature: 60-80 °C

Reference: RBD-3066

HELLO3D Fluorescent ABS Green 3D Printer Filament 1.75mm 1kg-Roll

High-quality glow-in-the-dark ABS filament with 20% phosphor content for luminous effects. Environmentally friendly, made from corn starch materials with no bubbles or warping. Compatible with most 3D printers and pens, suitable for printing crafts, decorations, and holiday supplies.

Reference: RBD-1311

mDrawbot kit

mDrawBot is a 4-in-1 drawing robot kit  it can be assembled into 4 different drawing robots:  mScara. mCar.  mSpider.  mEggBot.

Reference: RBD-0436

3D Printer Controller for RAMPS 1.4 REPRAP MENDEL PRUSA

Supply Voltage: 12V Standard interfaces (as that of the extruder) Reserved GCI like I2C and RS232 3 MOSFET’s are applied to the heater/ fan and thermistor circuit. Another 5A added to protect the component parts. An 11A fuse is added to the hotbed. Support 5 stepper drive board

Reference: RBD-1317

TPU Filament Plastic For 3D Printer 1.75mm 500g/Roll

TPU rubber based Material. Very flexible and elastic. Shore A Hardness at 87A. Tensile Strength 52 MPa.

Reference: RBD-2948

Anycubic I3 Mega V5 J-head Hotend 3D Printer Extruder Print Head - Original

Compatible with I3 Mega, I3 Mega X, Mega S 3D printers. Pre-assembled hotend kits with 12V 40W cartridge heater. Heat resistant aluminum heating block, temperature up to 250℃. Easy to install with connectors for thermistor and heating rod. Supports 1.75mm PLA, ABS, WOOD, PETG, and TPU filaments.

Reference: RBD-3045

Creality Ender 3 V3 Core XZ 3D Printer

 CoreXZ for 600mm/s Printing Speed  Stable Metal Build with Die-cast Parts  Direct Extrusion on Full Power  Integrated Tri-metal Nozzle, Quick to Swap  Two Mighty Fans for Instant Cooling  Auto Calibration for Leveling and More

Reference: RBD-1369

Micro Limit Switches

Lifetime: 30 million Rated voltage:125V Rated current: 5A Dissipation Power: IC Supply voltage: IC KW11-3Z bearing microswitch.

Reference: 1265

Brand: Anycubic

Anycubic I3 Mega S 3D Printer

Large build volume: 210 x 210 x 205 mm User-friendly 3.5-inch touch-screen interface Can be assembled in just a few minutes Full Rigid Solid metal frame construction and superior stability High quality Ultrabase

Reference: RBD-1390

Nema 17 Stepper Motor 17HS4401S

Nema17 Bipolar. Number of Phases: 2. Step Angle: 1.8°. Phase Voltage: 2.6Vdc. Phase Current: 1.7A. Resistance: 1.5Ω ±10%. Inductance: 2.8mH ±20% (1KHz). Number of Wire: 4 (100cm Length). Holding Torque: 43N.cm. Shaft Diameter: Ø5mm. Motor Length: 40mm. Mass: 270g.

Reference: 1403

Brand: Creality Official

Creality Ender-3 V2 3D Printer

Replaced with New Version Creality Ender-3 V3 SE 3D Printer. Click Here

Reference: RBD-1379

Nema 23 23HS5628 2.8A Two Phase 6.35mm Shaft Stepper Motor With TB6600 Stepper Motor Driver

Nema 23 23HS5628 2.8A Two Phase 6.35mm Shaft Stepper Motor  TB6600 Stepper Motor Driver CNC and 3D Printer

Reference: RBD-1315

HELLO3D PLA 3D Printer Filament 1.75mm 1kg-Roll

Great bio-compatibility, excellent transparency and environment-friendly Low shrinkage, good round shape Accurate diameter (±0.02mm) Easy to print with stable printing performance Various colors are available 100% bio-degradable and FDA food safety approved

Reference: RBD-0435

A4988 StepStick Stepper Motor Driver Module

Supply Voltage : 8-35 VDC. Current : 1.0A  (no heatsink ). Current : 2.0A (with heat-sinking). logic input : 3 – 5.5V . Automatic current decay mode detection / choice. Mixed with slow current decay mode.

Reference: 1404

Brand: Creality Official

Creality CR-6 SE Leveling-free DIY 3D Printer Kit

Modeling Technology: FDM（Fused Deposition Modeling） File Formats: STL/OBJ/AMF Slicer Software: Creality Slicer/Cura/Reptier-Host/Simplify3D Print Speed: 80-100mm/s Resume Print Function: Yes Printing Size: 235x235x250mm

Reference: RBD-3054

Creality Hyper Series PLA 3D Printing Filament 1KG

Unleash the full potential of 3D printing with the Creality Hyper Series PLA, designed to print up to 10x faster while maintaining precision and structural integrity. This 1KG spool of high-performance PLA is optimized for speed, strength, and consistency, making it the ideal choice for rapid prototyping, machine parts, figurines, and mass production....

Reference: RBD-2437

Brand: Creality Official

Creality CR-10 Smart Pro 3D Printer

Build area: 300 x 300 x 400 mm Maximum print head temperature: 300°C Maximum bed temperature: 100°C Communication: WiFi, USB Supported materials: PLA, ABS, PETG, TPU, PA, and carbon fiber composites.

Reference: RBD-1752

Ortur Laser Master 2 20W with STM32 MCU High Speed Ortur Laser Engraver and Cutter Kit

Ortur Laser Master 2 Model: Ortur OLM2-LU1-4 20W Year: 2021 Engrave Area: 400mm x 430m Available Laser Modules: 20W Model – Laser Power: 5000-5500 MW Laser Engraver and Cutter Kit

Reference: 1375

Brand: Anycubic

Anycubic Photon Zero Resin 3D Printer

Technique: LCD-based SLA Printing Speed: 30mm(H)/hour Power: 30W

Reference: RBD-1678

Big Easy Driver - Stepper Motor Driver

2A phase 3D Printer Big Easy Driver board V1.2 A4988 stepper motor driver board Module

Reference: RBD-1316

HELLO3D ABS 3D Printer Filament 1.75mm 1kg-Roll

Tougher and stronger Less warping (about 0.4% compared to over 8% in regular ABS) Prints smoother & smoother printed objects Better scratch, heat and oil resistance Can be polished using acetone Can be easily colored.

Reference: RBD-2526

Brand: Creality Official

Creality K1 Max AI Fast 3D Printer

 600mm/s Max Speed  20000mm/s² Acceleration  32mm³/s Max Flow Hotend  Hands-free Auto Leveling  Self-test with One Tap  Solve Ringing with G-sensor  Unibody Die-cast Frame AI-assisted Carefree Printing

Reference: RBD-2833

Impact Switch Collision Switch Sensor Module

Type: Vibration Sensors Output: Switching Transducer Dimensions: 25 x 14 x 6 (LxWxH) mm Weight: 3 gm

Reference: RBD-2436

Brand: Creality Official

Creality Ender-3 V3 SE 3D Printer

Creality Ender-3 V3 SE 3D Printer Max printing speed of 250mm/s and 2500mm/s² acceleration Auto leveling with CR Touch & Strain Sensor for precise prints "Sprite" Direct Extruder for PLA, PETG, and flexible TPU Stable Dual Z-axis and Y-axis Dual Linear Shafts for reliable printing Auto filament loading and unloading for easy filament changes

Reference: RBD-2832

Roller Lever Endstop Limit Switch Module

Designed for use as an endstop for 3D printers but it can be used for other contact detection applications as well.

Reference: RBD-1683

PLA Filament for 3D Pen

Compatible with 3D pen 15gram-17gram 1.75mm Random Color

Reference: RBD-1312

Makeblock XY-Plotter Robot Kit V2

XY plotter robot kit is a drawing robot Supports Pen and Pencil Supports Laser Engraving

Reference: RBD-2107

Sunlu PLA+ 3D Printer Filament 1.75mm 1kg-Roll

Great bio-compatibility, excellent transparency and environment-friendly Low shrinkage, good round shape Accurate diameter (±0.02mm) Easy to print with stable printing performance Various colors are available 100% bio-degradable and FDA food safety approved