

Reference: 984
Heat Shrink Tubing 2:1, Eventronic Electrical Wire Cable Wrap Assortment Electric Insulation Heat Shrink Tube Kit (1 pcs) Please Choose Size Below
Reference: 1354
Length: 8.5 inches (Medium) Material: Copper Plated.EachPin Spacing: 2.54mm.Color: Colorfulcompatible with 2.54mm mil spacing pin headers.It can be used for PCB project, pc motherboard, etc.Allow you to plug and unplug easily for prototyping.Package Contents: 1 x Jumper Wire You will get only one pcs.
Reference: 31
3 Types Available 1. Male to Male 2. Male to Female 3. Female-Female
Reference: 245
Choose your desire Resistor value from below:
Reference: 94
Arduino UNO in Bangladesh The Arduino Uno is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller.
(Retired)
"The Future is Now" 3D প্রিন্টার এখন পাওয়া যাচ্ছে রোবোটিক্স বাংলাদেশে। 3D প্রিন্টার কিনুন, আপনার পছন্দের 3D ডিজাইন তৈরি করুন অথবা ইন্টারনেট থেকে ডাউনলোড করুন। প্রিন্ট দিন মুহূর্তেই। যেকোনো জিনিস যেকোনো সময়ে। খুব সহজেই ভিডিও দেখে 3D প্রিন্টার এসেমব্লি করতে পারবেন।
The Anycubic i3 Mega is a solid, metal-framed 3D printer that comes mostly assembled. Assembly is easy and takes only a few minutes. It has a large build envelope. The Anycubic i3 Mega also includes some nice advanced features, including:
The Anycubic i3 Mega is a solid, metal-framed 3D printer that comes mostly assembled. Assembly is easy and takes only a few minutes. It has a large build envelope (210 x 210 x 205 mm, or 8.3 x 8.3 x 8.1 inches). The Anycubic i3 Mega also includes some nice advanced features, including:
Large build volume: 210 x 210 x 205 mm
User-friendly 3.5-inch touch-screen interface
Can be assembled in just a few minutes
Full Rigid Solid metal frame construction and superior stability
High quality, accurate printing with layer resolution down to 50 microns
Ultrabase
Smart manual leveling
Filament outage detection with an automatic pause when filament runs out and ability to resume after re-load
Auto Resume Print from Power Outage
Trigorilla Mainboard
The device is capable of producing high-quality prints, thanks to the stable construction and fine layer resolution down to 0.05 mm. It supports multiple filament materials, including PLA, ABS, High Impact Polystyrene (HIPS) and wood.
Excellent adhesion: Ultrabase covered by microporous coating, shows strong adhesion in printing. Easy to take off models by hand or with a little help from the scrapper for very large models.
Ultrabase integrated with heated bed: Super Flatness, Fast and uniform heating
Durable: The special coating is inorganic and has a hardness of 8 Mohs, and it is capable to work at 400°C.
Easy to clean: Ultrabase is easy to clean by alcohol/water.
Tri-Gorilla is an integrated mainboard that is integrated with the mighty function of the Mega2560+ramps 1.4 on respect of both software and hardware and has more premium features, a rich all-in-one electronics solution. Supports Marlin firmware too.
Printing Technology FDM (Fused Deposition Modeling)
Layer Resolution 0.05-0.3 mm
Positioning Accuracy X/Y 0.0125mm Z 0.002mm
Supported Print Materials PLA, ABS, HIPS, Wood
Print Speed 20~100mm/s(recommended speed 60%)
Travel Speed 150mm/s
Nozzle Diameter 0.4 mm/1.75 mm
Extruder Quantity Single
Build Size 210 x 210 x 205mm
Working Voltage 12V DC
Electrical 110-220V AC, 50/60Hz
Operational Extruder Temperature Max 260ºC
Ambient Operating Temperature 8ºC - 40ºC
Operational Print Bed Temperature Max 110ºC
Input Formats .STL, .OBJ, .DAE, .AMF
Slicer Software Cura
Cura Output Formats GCode
Connectivity SD Card, USB Port (expert users only)
Printer Dimensions 405mm x 410mm x453mm
Package Weight 16.5kg
Reference: 1315
PLA Filament 1.75mm Plastic 3D Printer 1kg/Roll 28 Colors Optional Rubber Consumables Material for Printing Material: PLA Filament diameter:1.75 Recommend print temperature :190-230 C Recommend print speed:40-90mm/s Density:1.25±0.05g/cm⊃3; 1 Spool filament length:340m
Reference: 1316
Brand: Anycubic
3D printer filament ABS 1.75mm Specification: Material: ABS Filament diameter:1.75/3mm Recommend print temperature :190-230c Recommend print speed:40-90mm/s Density:1.25±0.05g/cm⊃3; 1 Spool filament length:340m Package dimension: (1.75mm filament) 20*5.8*6.6cm (3.0mm filament) 16*3.2*9.0cm Product certification:RoHS
Reference: 1317
Brand: Anycubic
TPU Filament Plastic For 3D Printer 1.75mm 500g/Roll Flexible Color Optional Rubber Consumables Material for RepRap 500g/Roll
Reference: 249
Brand: SparkFun Electronics
(Retired) Description: This is the SparkFun “Time-of-Flight” Range Finder, a sensor board for the VL6180 distance sensor. Unlike most distance sensors that rely on reflected light intensity or reflected angles to determine range, the VL6180 uses a precise clock to measure the time it takes light to bounce back from a surface.
Reference: 144
(Retired) Fully Arduino and Microcontroller Compatible ◾ GSM module: SIM900A ◾ RTC backup battery ◾ A microphone port ◾ A headphone jack ◾ RS232 interface selection ◾ RS232 serial port ◾ lithium battery Interface ◾ power input connector ◾ power LED (blue) ◾ power switch ◾ SIM card Slot ◾ SMA antenna interfaces and supporting small antenna ◾ Power On / Off...
Reference: 577
(Retired) Raspberry Pi 3 Enclosure Box with Cooling Fan
Reference: 82
(Retired) Description: This is a simple-to-use Carbon Monoxide (CO)sensor, suitable for sensing CO concentrations in the air. The MQ-7 can detect CO-gas concentrations anywhere from 20 to 2000ppm.
Reference: 134
(Retired) Description: The pcDuino3 is a high performance, cost effective mini PC platform that runs full-featured operating systems such as Ubuntu and Android. In addition to running Linux and Android, the pcDuino3 has support for programming languages such as C, C++, Java, Python, Arduino, and more. You can even use your favorite Arduino shields for...
Reference: 236
Brand: SparkFun Electronics
(Retired)Description: The Intel® Edison is an ultra small computing platform that will change the way you look at embedded electronics. Each Edison is packed with a huge amount of tech goodies into a tiny package while still providing the same robust strength of your go-to single board computer.
Reference: 1240
Digital Caliper, FstDgte 0-6" Calipers Measuring Tool - Electronic Micrometer Caliper with Large LCD Screen, Auto-off Feature, Inch and Millimeter Conversion
Reference: 106
(Retired) Description: Arduino is an open-source physical computing platform based on a simple i/o board and a development environment that implements theProcessing/Wiring language.
Reference: 327
(Retired) Product information Item :Tiger Li-po 3SCapacity: 4500 mAhVoltage: 11.1 VContinuous Discharge C-rate:30CMax charging rate: 5C Application1) Quadcopter, Large 4-axis ,6-axis and multi-axis aircraft 2). Align famous 3D helicopter RC Helicopter ,Trex 450/500/600/7003). Indoor Helis, Indoor UFO ,3D Airplane Aerobatics4). Mico Slow Flyers, Park...
Reference: 322
(Retired) This SIM808 all in one Shield is a GSM and GPS Bluetooth all-in-one function module. It is based on the latest GSM/GPS module SIM808 from SIMCOM, supports GSM/GPRS Quad-Band network and combines GPS technology for satellite navigation GSM Antenna is included. GPS Antenna is not included. Fully Arduino Compatible (Please download the attach...
Reference: 199
Brand: DFRobot
(Retired) INTRODUCTION: Radxa Rock is a single-board computer, based on RK3188, integrated with Bluetooth 4.0, WiFi, LAN, RTC, IR and etc. The CPU is ARM Cortex-A9 with Quad-core at 1.6Ghz, and also including GPU that support OpenGL ES 2.0. It means you play 1080p videos, and output with HDMI.
Reference: 273
Brand: Waveshare
(Retired) A1rduino WIFI Shield EMW3162
Reference: 418
(Retired) Features: High-Speed, High-Accuracy Fingerprint Identification using the SmackFinger 3.0 Algorithm Download Fingerprint Images from the Device Read and Write Fingerprint Templates and Databases Simple UART protocol (Default 9600 baud) 360° Fingerprint Recognition Documents: Datasheet Demo Software Garage Door Opener Tutorial (Instructables)...
Reference: 171
(Retired) Description: This is the very popular 2.4GHz XBee module from Digi. These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and...
Reference: 193
(Retired) Positioning IR Camera INTRODUCTION: Ever want your robot to hunt down heat objects or navigated with fire? This is a small form factor IR camera capable of tracking up to four heat/IR sources. The applications are plenty
Reference: 292
(Retired) Wild Scorpion 2200mAh 3S 11.1v 30C Lipo Battery 3S 11.1V 2200mAh 30C Dimensions (mm): 19x43x137 Weight (grams): 286
Reference: 213
(Retired) FPV Camera 720p FishEye Lens Wide Angle This Camera Can be used with this Boscam FPV 5.8Ghz AV Transmitter and Receiver for FPV Purpose
Reference: 714
(Retired) Powerful High Torque DC Gear Motor with Encoder Voltage: 12V DC RPM:100RPM Diameter: 37mm Shaft length: 15mm Length (excl. shaft): View Photos Shaft diameter: 6mm White and red cord : (+)(-) power cord Yellow and blue cord: For Encoder
Reference: 287
(Retired)Raspberry Pi mini WIFI Dongle Features: Chipset: Realtek 8188CU Peak throughput: 150MbpsAntenna: Integrated PCB antenna (1T1R)
Reference: 197
Brand: DFRobot
(Retired) INTRODUCTION This is a Arduino GPS/GPRS/GSM shield from DFRobot. This shield with a Quad-band GSM/GPRS engine works on frequencies EGSM 900MHz/DCS 1800MHz and GSM850 MHz/PCS 1900MHz. It also supports GPS
Reference: 255
(Retired) Wild Scorpion 3500mAh 3S 11.1v 30C Lipo Battery 3S 11.1V 3500mAh 30C Dimensions (mm): 19x43x137 Weight (grams): 286
Reference: 356
Mini 2-Axis platform for camera Weight: 20gsuitable for 9g-12g servos or MG90, MG90S, SG90precision and great appearanceit’s a very stable platform for camera
Reference: 252
(Retired) Description: his is the LIDAR Lite, a compact high performance optical distance measurement sensor from PulsedLight. The LIDAR Lite is ideal when used in drone, robot, or unmanned vehicle situations where you need a reliable and powerful proximity sensor but don’t possess a lot of space.
Reference: 164
(Retired) Replaced By New Raspberry Pi 3 Model B
Reference: 361
Brand: SparkFun Electronics
(Retired) Description: Do you make time to talk to your Arduino? Maybe you should! The Easy VR Shield 3.0 is a voice recognition shield for Arduino boards integrating an EasyVR module. It includes all of the features of the EasyVR module in a shield form factor that simplifies connection to the Arduino main board and PC.
Reference: 1047
(Retired) রাস্পবেরি পাই ৩ মডেল বি প্লাস পৃথিবীর অন্যতম ক্রেডিট কার্ড সাইজের শক্তিশালী কম্পিউটার। এটি ফুল এইচডি ভিডিও প্লেব্যাক সমর্থন করে। এটি মূলত লিনাক্স অপারেটিং সিস্টেম সাপোর্ট করে। অনেক ধরনের প্রোগ্রাম ডেভলপ করা যায়। কি কি থাকছে ? ১ টি রাস্পবেরি পাই ৩ মডেল বি প্লাস (মেড ইন UK) ১ টি কুলিং ফ্যান কেস রাস্পবেরি পাই এর হিট সিংক রাস্পবেরি পাই এর...
Reference: 175
Brand: SparkFun Electronics
(Retired) Raspberry Pi - Model B+ Enclosure (Black) Description: The Raspberry Pi Model B+ is THE new favorite of development platforms, so the last thing that you’d want is for something bad to happen to it. Why not protect it with one of these snazzy black plastic enclosures?
(Retired)
"The Future is Now" 3D প্রিন্টার এখন পাওয়া যাচ্ছে রোবোটিক্স বাংলাদেশে। 3D প্রিন্টার কিনুন, আপনার পছন্দের 3D ডিজাইন তৈরি করুন অথবা ইন্টারনেট থেকে ডাউনলোড করুন। প্রিন্ট দিন মুহূর্তেই। যেকোনো জিনিস যেকোনো সময়ে। খুব সহজেই ভিডিও দেখে 3D প্রিন্টার এসেমব্লি করতে পারবেন।
The Anycubic i3 Mega is a solid, metal-framed 3D printer that comes mostly assembled. Assembly is easy and takes only a few minutes. It has a large build envelope. The Anycubic i3 Mega also includes some nice advanced features, including: