• How to Place an Order

  • Store Pick Up

  • Request for Quotation/ International Sourcing

  • Order Status

Jumper Wire Single 20cm Robotics Bangladesh
Quick view

Reference: RBD-1354

Jumper Wire Single 20cm

Length: 8 inches/20 CM (Long) Material: Copper Plated Pin Spacing: 2.54mm.

Price BDT 3
More
Out of Stock
Choose Your Size
Quick view

Reference: 0984

Heat Shrink Tube

Choose your desire Heat Sink Size from below: 

Price BDT 2
More
In-Stock
MIFARE Classic 1K RFID NFC Smart Card 13.
Quick view

Reference: RBD-0351

MIFARE Classic 1K RFID NFC Smart Card 13.56MHz Printable

Contactless transmission of data and supply energy (no battery needed) Operating distance: Up to 100mm (depending on antenna geometry) RoboticsBD Operating frequency: 13.56MHz Data transfer: 106 kbit/s Data integrity: 16 Bit CRC, parity, bit coding bit counting Anticollision Typical ticketing transaction: <100 ms ( including backup management)...

Price BDT 35
More
In-Stock
470 Ohm 1/4w - Pack of 5
Quick view

Reference: 0245

Kiloohm (KΩ) 1/4w Resistors - Pack of 5

Choose your desire Resistor value from below: 

Price BDT 5
More
In-Stock
Jumper Wire 40 Pcs Set 20cm Robotics Bangladesh
Quick view

Reference: 0031

Jumper Wire 40 Pcs Set 20cm

3 Types Available (Please select from option) 1. Male to Male  2. Male to Female 3. Female-Female

Price BDT 100
More
In-Stock
Buzzer
Quick view

Reference: 0766

Ohm (Ω) 1/4w Resistors - Pack of 5

Choose your desire Resistor value from below: 

Price BDT 5
More
In-Stock
5 mm Green LED (Pack of 5)
Quick view

Reference: RBD-0768

5 mm Red LED (Pack of 5)

Size: 5mm Color: RED Head Shape: Round Lens Appearance: Transparent

Price BDT 5
More
In-Stock
Push Button Switch (2PIN) Robotics Bangladesh
Quick view

Reference: RBD-0761

Push Button Switch (2PIN)

Breadboard friendly Mounting Style: Through Hole Mounting Direction: Vertical

Price BDT 5
More
In-Stock
Jumper Wire Single 30cm Robotics Bangladesh
Quick view

Reference: 1353

Jumper Wire Single 30cm

Length: 12.5 inches/30 CM (Long) Material: Copper Plated Pin Spacing: 2.54mm.

Price BDT 5
More
Out of Stock
Buzzer
Quick view

Reference: RBD-0758

BC547 NPN Transistor

BC547 NPN DIP Transistor

Price BDT 4
More
In-Stock
All best sellers
  • New

RF Transceiver Radio Module nRF905 433/868/915MHz with Antenna

RBD-2928

Radio module (transmitter and receiver) operating in 433 MHz band with SPI communication interface. Powered by 2.7 V - 3.3 V, the outputs are goldpin connectors.It has an external antenna with SMA connector.

BDT 490
Quantity
In Stock

2 people have purchased this item recently
2 people added this item to the cart in last 10 days
29 items in stock
  • Store Pickup Available! Store Pickup Available!
  • Free Ship Over 5000 BDT Free Ship Over 5000 BDT
  • Quality Product Quality Product
  • No Warranty No Warranty
  • No Replacement No Replacement

Product description: nRF905 433 / 868 / 915 MHz radio module - THT transceiver with antenna

Radio module (transmitter and receiver) operating in 433 MHz, 868 MHz and 915 MHz band with SPI communication interface. It is powered by2.7 V - 3.3 V.The devicehas an external antenna which is connected to the SMA connector, the signals are led to the goldpin connectors.

02747_7b.jpg

Since the device works with voltage up to 3.3 V, in order to connect with boards operating on 5 V (e.g.Arduino Uno) it is necessary to usea converter.

Product compatible with Arduino

On the Internet you can findconnection instructionsand sample programs for Arduino onGitHub.

Radio module specification nRF905 433 / 868 / 915 MHz

  • Power supply voltage: 1.7 V - 3.3 V
  • Power consumption: 12.5 mA - RX, 30 mA - TX
  • Maximum output power: 10 dBm
  • The sensitivity of the receiver: - 100 dBm
  • Frequency of operation: 433 MHz, 868 MHz, 915 MHz
  • Communication interface: SPI
  • GMSK modulation
  • SMA connector (external antenna included)
  • Dimensions: 31 x 19 mm
  • Mounting: threaded - raster 2.54(goldpin connectors)

What is the price of RF Transceiver Radio Module nRF905 433/868/915MHz with Antenna in Bangladesh?

The latest price of RF Transceiver Radio Module nRF905 433/868/915MHz with Antenna in Bangladesh is BDT 490 You can buy the RF Transceiver Radio Module nRF905 433/868/915MHz with Antenna at best price from our RoboticsBD or visit RoboticsBD Office.

Please note that the product information provided on our website may not be entirely accurate as it is collected from various sources on the web. While we strive to provide the most up-to-date information possible, we cannot guarantee its accuracy. We recommend that you always read the product labels, warnings, and directions before using any product.

Product Images are shown for illustrative purposes only and may differ from the actual product.

Product Details
RBD-2928
29 Items
30 other products in the same category:
Precision Real Time Clock Module DS3231 AT24C32 I2C
Quick view

Reference: RBD-0386

Precision Real Time Clock Module DS3231 AT24C32 I2C

1 Hz output pin SQW. 32 KHz output pin 32K. RoboticsBD Voltage Supply: 2.2 V ~ 5.5 V (for RTC). Time Format: HH: MM: SS (12/24 hr). Date Format: YY-MM-DD-dd. DS 3231 based RTC with 2032 Battery Holder. RoboticsBD Battery is not included Note: Batteries not included.

Price BDT 260
More
In-Stock
Opto-Isolator ILD213T Robotics Bangladesh
Quick view

Reference: RBD-1381

Opto-Isolator ILD213T

Forward voltage 1.55V Reverse current 100mA Capacitance 25 pF

Price BDT 480
More
In-Stock
New ICL8038 12V to 15V 10Hz-450KHz Triangular/Rectangular/Sine Wave Signal Generator Module Robotics Bangladesh
Quick view

Reference: RBD-2761

ICL8038 12V to 15V 10Hz-450KHz Triangular/Rectangular/Sine Wave Signal Generator Module

ICL8038 12V to 15V, Signal Generator, Medium/Low Signal, Frequency 10Hz-450KHz, Triangular/Rectangular/Sine Wave Generator, Module Working voltage: 12V ~ 15V Output: Triangular wave, Square wave and sine wave. Frequency range: 10HZ ~ 450kHz Low distortion sine wave: 1% Duty cycle range: 2% to 98% Low temperature drift: 50ppm / ℃ Triangular wave output...

Price BDT 580
More
In Stock
 Data Logger Module Logging Shield Data Recorder Shield for Arduino
Quick view

Reference: RBD-0413

Data Logger Module Logging Shield Data Recorder Shield for Arduino

SD card interface works with FAT16 or FAT32 formatted cards. 3.3v level shifter circuitry prevents damage to your SD card. Real-time clock (RTC) keeps the time going even when the Arduino is unplugged. The battery backup lasts for years. Included libraries and example code for both SD and RTC mean you can get going quickly Prototyping area for soldering...

Price BDT 499
More
In-Stock
TDA7297 Audio Amplifier Module Robotics Bangladesh
Quick view

Reference: RBD-1867

TDA7297 Audio Amplifier Module

Original TDA7297 core technology Easy Plug and Play Operation Dynamic operating Voltage Range: 8 to 16V High fidelity Dual 15W output.

Price BDT 490
More
In-Stock
Monster Moto Shield Dual VNH2SP30 Motor Driver Module 30A Robotics Bangladesh
Quick view

Reference: RBD-0377

Monster Moto Shield Dual VNH2SP30 Motor Driver Module 30A

Voltage Max: 16V Maximum current rating: 30 A Practical Continuous Current: 14 A Current sensing available to Arduino analog pin MOSFET on-resistance: 19 mΩ (per leg) Maximum PWM frequency: 20 kHz Thermal Shutdown Undervoltage and Overvoltage shutdown. RoboticsBD

Price BDT 6,650
More
In-Stock
L298P Motor Driver Shield for Arduino Robotics Bangladesh
Quick view

Reference: RBD-2145

L298P Motor Driver Shield for Arduino

L298P based Arduino motor driver shield Onboard Buzzer (D4). Onboard Bluetooth interface, you can directly plug, no wiring required. Six Analog interface. Forward, Backward steering indicators

Price BDT 990
More
In-Stock
20mm 2.4Mhz Ultrasonic Mist Maker Fogger Atomizing Transducer Robotics Bangladesh
Quick view

Reference: RBD-2249

20mm 2.4Mhz Ultrasonic Mist Maker Fogger Atomizing Transducer

Made From High-Quality Materials. Electronic High-Frequency Oscillations (2.4MHz). Material: Ceramic, Wire Diameter: Atomizer: 2cm/0.79in; Sealing ring: 2.5cm/0.98in

Price BDT 199
More
In-Stock
Stainless Steel 1m Conductive Thread Wire for Wearable Lilypad Robotics Bangladesh
Quick view

Reference: RBD-1842

Stainless Steel 1m Conductive Thread Wire for Wearable Lilypad

Material: 12UM Stainless steel fiber Gram Weight: 0.2458g/m Strength: 2.8KGF. Length: 1m. Diameter(mm): 0.12. Resistance (Ω/m) : 27.

Price BDT 80
More
In-Stock
LilyPad SMD LED Red Color Robotics Bangladesh
Quick view

Reference: RBD-2239

LilyPad SMD LED Red Color

Wearable e-textile technology.  Designed with large sew tabs LED Red Color

Price BDT 18
More
In-Stock
USB Host Shield For Arduino UNO, MEGA, Compatible with Google Android ADK Robotics Bangladesh
Quick view

Reference: RBD-0108

USB Host Shield For Arduino UNO, MEGA, Compatible with Google Android ADK

Works with standard (dual 5/3.3V) and 3.3V-only (for example, Pro Arduino) boards. Complies with USB Specification Revision 2.0 (Full-Speed 12Mbps Peripheral, Full-/Low-Speed 12Mbps/1.5Mbps Host) Supports HID devices, such as keyboards, mice, joysticks, etc. Compatible with Mass storage devices, such as USB sticks, memory card readers, external hard...

Price BDT 1,199
More
In-Stock
DS1302 Real Time Clock Module Robotics Bangladesh
Quick view

Reference: RBD-1840

DS1302 Real Time Clock Module

The DS1302 trickle-charge timekeeping chip module with battery backup  A real-time clock/calendar and 31 bytes of static RAM. Communicates with a microprocessor via a simple serial interface. Real-time clock/calendar provides seconds, minutes, hours, day, date, month, and year information. Note: Batteries not included.

Price BDT 190
More
In-Stock
XBee USB Adapter
Quick view

Reference: RBD-0282

XBee USB Adapter

Specifications: - 3.3V and 5V dual power output- 3.3V and 5V IO compatible- USB2.0 protocol- BitBang mode ready- Easily connected to PC via mini USB cable- Support XBee-setting with software X-CTU

Price BDT 480
More
In-Stock
Stereo Enclosed Speaker 3W 8Ω Robotics Bangladesh
Quick view

Reference: RBD-2307

Stereo Enclosed Speaker 3W 8Ω

This speaker is a great addition to any audio project where you need 8 ohm impedance and 3W or less of power. We particularly like this speaker as it is small and enclosed for good audio volume and quality. It has a handy JST 2PH input cable to add audio to your displays and other projects (this connector is part of the JST-PH series which is ~2.0mm...

Price BDT 390
More
In Stock
   Xbee shield V03
Quick view

Reference: RBD-0985

Xbee Shield For Arduino V03

Stackable design, easy to plug into the ARDUINO development board. Coupled with the Arduino Bluetooth Bee Bluetooth module, and other Bluetooth devices can communicate Wirelessly. 3.3v and 5v dual power output. 3.3v and 5v IO compatible. USB2.0 protocol.

Price BDT 490
More
In-Stock
Open Smart Battery Style Digital Tube LED Battery Level Display Module Robotics Bangladesh
Quick view

Reference: RBD-2557

Open Smart Battery Style Digital Tube LED Battery Level Display Module

Introducing the Battery Level Display Module, a versatile and user-friendly device based on battery-style digital tube LED technology. This module features 10 light segments and incorporates the TM1651 driver chip for simplified control, requiring only two signal lines along with VCC and GND connections. It is specifically designed for displaying battery...

Price BDT 320
More
In Stock
1 Channel 12V 30A Relay Control Board Module with Optocoupler Robotics Bangladesh
Quick view

Reference: RBD-2658

1 Channel 12V 30A Relay Control Board Module with Optocoupler

This 1 channel 12V 30A relay control board module with optocoupler modules is compliant with international safety standards, control and load areas isolation trenches it has a single relay a genuine. The inputs of 1 Channel 12V 30A Relay Module are isolated to protect any delicate control circuitry. It can be used as a single chip module for appliance...

Price BDT 330
More
In Stock
MAX7219 8 Digit Led Tube Display Control Module Robotics Bangladesh
Quick view

Reference: RBD-2454

MAX7219 8 Digit Led Tube Display Control Module

Power: 5V This module is compatible with 5V and 3.3V microcontrollers. Material: PCB + Electronic Components

Price BDT 220
More
In Stock
New CH375B USB Disk Read-write Module USB Flash Disk For Arduino Robotics Bangladesh
Quick view

Reference: RBD-2736

CH375B USB Disk Read-write Module USB Flash Disk For Arduino

2×8 connector, easy with the MCU mount. Jumper selectable can work in parallel or serial mode. On board 3.3 V LDO 1117, provides 800 mA current. 5 V power supply is powered by the target board. 12 MHZ crystal.

Price BDT 490
More
In Stock
3.5inch HDMI Display-B Robotics Bangladesh
Quick view

Reference: RBD-1929

3.5inch HDMI Display-B

General-purpose HDMI display, Connecting computers, TV boxes, Microsoft Xbox360, SONY PS4, Nintendo Switch and so on Can be used as Raspberry Pi display that supports Raspbian, Ubuntu, Kodi, Win10 IOT, single-touch, free drive Can be used as PC monitor, support Win7, Win8, Win10 system (No touch Function)

Price BDT 3,800
More
In-Stock
Gravity Analog Heart Rate Monitor Sensor (ECG) for Arduino Robotics Bangladesh
Quick view

Reference: RBD-2326

Brand: DFRobot

Gravity Analog Heart Rate Monitor Sensor (ECG) for Arduino

The DFRobot Heart Rate Monitor Sensor is used to measure the electrical activity of the heart. This electrical activity can be charted as an ECG and output as an analog reading. An ECG signal can be extremely noisy so we have included an AD8232 chip which will generate a clear signal from the PR and QT Intervals. Using the Arduino IDE "Serial Plotter"...

Price BDT 2,810
More
Last items in stock
WS2812B RGB LED 8 Bit Ring Robotics Bangladesh
Quick view

Reference: RBD-2305

WS2812B RGB LED 8 Bit Ring

This is the 8 LED NeoPixel Ring, a small chainable 32mm outer diameter board equipped with 5050 WS2812 RGB LEDs. The WS2812s are each addressable as the driver chip is located inside the LED. Each NeoPixel Stick has ~18mA constant current drive so the color will be very consistent even if the voltage varies, and requires 5 V.

Price BDT 170
More
In Stock
NE555 Pulse Frequency Duty Cycle Adjustable Module Square Wave Signal Generator Robotics Bangladesh
Quick view

Reference: RBD-2230

NE555 Pulse Frequency Duty Cycle Adjustable Module Square Wave Signal Generator

Main chip: NE555 Input Voltage: 5V-15V DC. Generate an adjustable pulse for MCU. Generate an adjustable pulse, to control circuitry associated.

Price BDT 150
More
In-Stock
5A Adjustable Step Down CC / CV Module Robotics Bangladesh
Quick view

Reference: RBD-2459

5A Adjustable Step Down CC / CV Module

Converts 5 – 30V down to a 0.8 – 29V output with adjustable current limit

Price BDT 680
More
In Stock
JQ6500 V2.1 MP3 Player Module Robotics Bangladesh
Quick view

Reference: RBD-2294

JQ6500 V2.1 MP3 Player Module

JQ6500 MP3 Voice sound module can play stereo MP3 files or standard mono audio files. The module has two different modes to operate in; serial communication mode (connecting to a microcontroller) or AD button control mode (module can be controlled with switches).

Price BDT 690
More
In Stock
Five-Way Navigation Button Module 5D Joystick Independent Keyboard Switch Button Single Chip Robotics Bangladesh
Quick view

Reference: RBD-1573

Five-Way Navigation Button Module 5D Joystick Independent Keyboard Switch Button Single Chip

Supports up/down/left/right/middle with extra set and reset button 2V-9V wide working voltage The number of IO: 7 Operating temperature: -40℃ to 85℃ Size: 4×2.5cm

Price BDT 124
More
In-Stock
Nextion NX3224T024 - Generic 2.4" TFT LCD Touch Display Robotics Bangladesh
Quick view

Reference: RBD-1217

Nextion NX3224T024 - Generic 2.4" TFT LCD Touch Display

Nextion is a seamless Human Machine Interface (HMI) solution. Nextion provides a control and visualization interface between a human and a process, machine, application or appliance.  Nextion is mainly applied to Internet of thing (IoT) or consumer electronics field.

Price BDT 3,099
More
In-Stock
Button Keypad 3x4 module (Assembled) Robotics Bangladesh
Quick view

Reference: RBD-1333

Button Keypad 3x4 module (Assembled)

Easy communication with any microcontroller. Tactile type switches. Over 1,000,000 operations per key. Contact rated for 12V dc @ 20mA. Over 1,000,000 operations per key. Dimensions: 56 x 80 x 17 mm.(LxWxH)

Price BDT 699
More
Out of Stock
1 Channel 5V Relay Module Arduino
Quick view

Reference: RBD-0702

1 Channel 5V Relay Board Module

It has a relay status indicator led Power LED(Green), 8 relay status indicator LED(Red) Relay control interface by single-chip IO. Low-level suction close, high-level release. Easy to use, simple 3 line structure. Note: Relay might be different from the picture as per stock

Price BDT 88
More
In-Stock
Humidity Sensitive Relay Module 5V Robotics Bangladesh
Quick view

Reference: RBD-2555

Humidity Sensitive Relay Module 5V

This is a self-contained switching module that energizes / de-energizes a relay based on the humidity level.   Just add 5V power and hook up the load you want to control then adjust the potentiometer to set the relative humidity level at which you want the relay to switch between ON / OFF. This type of module can be used for applications such as to...

Price BDT 370
More
In Stock
Customers who bought this product also bought:
CC1101 500kbps Wireless Transceiver Module RF 433mhz SPI Interface Spring Antenna Robotics Bangladesh
Quick view

Reference: RBD-2358

CC1101 500kbps Wireless Transceiver Module RF 433mhz SPI Interface Spring Antenna

This is a self-developed, small-size, 433 MHz DIP wireless module with a maximum tx power of 10mW based on CC1101 of Texas Instruments. Due to the adoption of the very mature CC1101 as the core chip, its stability has been unanimously praised by user. The module is mainly used in smart home, industrial, scientific research and medical, as well as...

Price BDT 530
More
In Stock