GPS GSM GPRS SIM808 Module (Arduino Compatible)

Brand: Waveshare

Arduino WIFI Shield EMW3162

Double-ended 50cm Cable Crocodile Clips

 Double-ended 50cm Cable  Crocodile Clips 5 colour available Red, Black, White, Green, Yellow.

I/O Expander Module PCF8574T

The PCF8574 IO Expansion Board is used as remote 8-bit I/O expander for I2C-bus. Up to 8 PCF8574, IO Expansion Board can be connected to the I2C-bus, providing up to 64 I/O ports. The PCF8574 IO Expansion Board features I2C pinheader on one side and I2C connector on the opposite side. Hence, it's more flexible to connect the board to your development...

Voice Recognition Module Kit V3 (Elechouse)

V3 Kit Voice Recognition Module BoardFor Arduino Compatible Sensor Voice Recognition Module is a compact and easy-control speaking recognition board.This product is a speaker-dependent voice recognition module. It supports up to 80 voice commands in all. Max 7 voice commands could work at the same time. Sample Code & Library and Manual is available...

Reference: LCD Shield

Arduino LCD Shield

Arduino LCD Shield (Fully Arduino Compatible) with Bluetooth Port Compatible with LiquidCrystal Library Arduino PinLiquidCrystal lcd(12, 11, 5, 4, 3, 2) No more hassle, connect an LCD to Arduino easily, Plug & Play.

Brand: SparkFun Electronics

EasyVR Shield 3.0 - Voice Recognition Shield

Description:  Do you make time to talk to your Arduino? Maybe you should! The Easy VR Shield 3.0 is a voice recognition shield for Arduino boards integrating an EasyVR module. It includes all of the features of the EasyVR module in a shield form factor that simplifies connection to the Arduino main board and PC.

Reference: SIM900A

ATK-SIM900A GSM /GPRS Module

Fully Arduino and Microcontroller Compatible ◾ GSM module: SIM900A ◾ RTC backup battery ◾ A microphone port ◾ A headphone jack ◾ RS232 interface selection ◾ RS232 serial port ◾ lithium battery Interface ◾ power input connector ◾ power LED (blue) ◾ power switch ◾ SIM card Slot ◾ SMA antenna interfaces and supporting small antenna ◾ Power On / Off button ◾...

Arduino MicroSD Card Module

Arduino MicroSD Card Module

4x4 Keypad - 16 Key - Matrix Membrane Type

4 x 4 Matrix Membrane Keypad Size: 7cm X 7.5cm 8 pin connector Adhesive mounting (sticker on the back side) Maximum Circuit Rating: 35VDC, 100mA Operation Temperature: 0 to +60 centigrade Humidity: 40 centigrade, 90%-95%, 240 hours Fexible Circuit Length: Approx. 3.3 inch / 83 mm

Brand: DFRobot

Dual Bipolar Stepper Motor Shield for Arduino (A4988) With Xbee Communication Socket

INTRODUCTION Do you want to do some projects with stepper motors suchas an auto curtain, a XY Plotter, or a 3D printer? Generally, it's not an easy thing todrive stepper motor(s) with Arduino; but with this stepper motor shield, you can easily control 2 stepper motors via just 4 digital I/O’s. This board is  

PAM8406 5Wx2 Class D Digital Stereo Audio Power Amplifier Module Board

Operating voltage: 2.5V-5.5V, recommended 5VSpeaker Load: 2-8 OhmsInput and Output Connectors: Pins on 0.2" centersSize: 24 x 23 x 105 mm (L x W x H)Net weight: 3g

Motor Driver - Dual TB6612FNG (1A)

ESP32 ESP-32S NodeMCU Development Board Wireless WiFi

ESP32 Development Board WiFi+Bluetooth Ultra Low Power Consumption Dual Cores ESP-32 ESP-32S Board

XBee USB Adapter

Specifications: - 3.3V and 5V dual power output- 3.3V and 5V IO compatible- USB2.0 protocol- BitBang mode ready- Easily connected to PC via mini USB cable- Support XBee-setting with software X-CTU

I2C LCD Adapter Module

As the pin resources of Arduino controller is limited, your project may be not able to use normal LCD shield after connected with a certain quantity of sensors or SD card. However, with this I2C interface LCD module, you will be able to realize data display via only 2 wires. If you already has I2C devices in your project, this LCD module actually cost no...

New ENC28J60 Ethernet LAN Network Module For Arduino

Chip board ENC28J60-I/SOThe board 25MHZ crystalThe network interface board HR911105A3.3 V power supply pinThe board size : 56 (mm) x 34 (mm)

1 Channel 5V Relay Module Arduino

This is a 5V 1-Channel Relay interface board, Be able to control various appliances, and other equipments with large current. It can be controlled directly by Micro-controller (Raspberry Pi, Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic) .

Ultrasonic Transducer Waterproof Distance Measuring Sensor Module

Specification: Electrical parameters: JSN-SR04T Operating voltage: DC 5V Quiescent current: 5mA Total current work: 30mA Acoustic emission frequency: 40khz Farthest distance: 4.5m Blind: 25cm 

Reference: Geekcreit™

Arduino UNO (China)

Arduino UNO  China Made by Geekcreit™. Double rail pinheader for more advance use. So for every pin you can now connect two jumper. With USB Cable.  ATmega328P Development Board For Arduino

GPRS GSM GPS Bluetooth All in one SIM808 Shield for Arduino

This SIM808 all in one Shield is a GSM and GPS Bluetooth all-in-one function module. It is based on the latest GSM/GPS module SIM808 from SIMCOM, supports GSM/GPRS Quad-Band network and combines GPS technology for satellite navigation GSM Antenna is included. GPS Antenna is not included.  Fully Arduino Compatible  (Please download the attach arduino code)  

Heart Rate Pulse Sensor Pulsesensor Sensor Module For Arduino

Description: Heart rate data can be really useful whether you’re designing an exercise routine, studying your activity or anxiety levels or just want your shirt to blink with your heart beat. The problem is that heart rate can be difficult to measure. Luckily, the Pulse Sensor Amped can solve that problem!

AC 0~5A Analog Current Meter Module Ammeter Sensor Board for Arduino

AC 0~5A Analog Current Meter Module Ammeter Sensor Board for Arduino This electricity sensor is based on TA12-100 current transformer, which can transform AC signals of large current into small amplitude signals. The maximum current that can be detected can reach 5A, and the present current signal can be read via analog I / O port.

Reference: DEV-12856

pcDuino3 - Dev Board

Description: The pcDuino3 is a high performance, cost effective mini PC platform that runs full-featured operating systems such as Ubuntu and Android. In addition to running Linux and Android, the pcDuino3 has support for programming languages such as C, C++, Java, Python, Arduino, and more. You can even use your favorite Arduino shields for added...

Motor Driver 43A BTS7960

Brand: DFRobot

Relay Shield for Arduino V2.1 with Xbee Socket

Brand: DFRobot

Xbee Shield for Arduino (without Xbee)

Xbee Shield for Arduino (without Xbee) INTRODUCTION: The XBee Expansion Board is a compliant solution designed to meet low-cost, low-power wireless sensor networks with special needs.The module is easy to use, low power consumption, and the provision of critical data between devices reliable transmission.

MCP2515 CAN Bus Module TJA1050 Receiver SPI Module For Arduino

UART EM4100 RFID Card Reader RDM6300

Overview RDM6300 125KHz cardreader mini-module is designed for reading code from 125KHz card compatible read-only tags and read/write card . It can be applied in office/home security, personal identification, access control, anti-forgery, interactive toy and production control systems etc.

Precision Real Time Clock Module DS3231 AT24C32 I2C

Precision Real Time Clock Module DS3231 AT24C32 I2C

Brand: Waveshare

Logic Level Converter