• How to Place an Order

  • Store Pick Up

  • Request for Quotation/ International Sourcing

  • Order Status

Jumper Wire Single 20cm Robotics Bangladesh
Quick view

Reference: RBD-1354

Jumper Wire Single 20cm

Length: 8 inches/20 CM (Long) Material: Copper Plated Pin Spacing: 2.54mm.

Price BDT 3
More
Out of Stock
Choose Your Size
Quick view

Reference: 0984

Heat Shrink Tube

Choose your desire Heat Sink Size from below: 

Price BDT 2
More
In-Stock
MIFARE Classic 1K RFID NFC Smart Card 13.
Quick view

Reference: RBD-0351

MIFARE Classic 1K RFID NFC Smart Card 13.56MHz Printable

Contactless transmission of data and supply energy (no battery needed) Operating distance: Up to 100mm (depending on antenna geometry) RoboticsBD Operating frequency: 13.56MHz Data transfer: 106 kbit/s Data integrity: 16 Bit CRC, parity, bit coding bit counting Anticollision Typical ticketing transaction: <100 ms ( including backup management)...

Price BDT 35
More
In-Stock
470 Ohm 1/4w - Pack of 5
Quick view

Reference: 0245

Kiloohm (KΩ) 1/4w Resistors - Pack of 5

Choose your desire Resistor value from below: 

Price BDT 5
More
In-Stock
Jumper Wire 40 Pcs Set 20cm Robotics Bangladesh
Quick view

Reference: 0031

Jumper Wire 40 Pcs Set 20cm

3 Types Available (Please select from option) 1. Male to Male  2. Male to Female 3. Female-Female

Price BDT 100
More
In-Stock
Buzzer
Quick view

Reference: 0766

Ohm (Ω) 1/4w Resistors - Pack of 5

Choose your desire Resistor value from below: 

Price BDT 5
More
In-Stock
5 mm Green LED (Pack of 5)
Quick view

Reference: RBD-0768

5 mm Red LED (Pack of 5)

Size: 5mm Color: RED Head Shape: Round Lens Appearance: Transparent

Price BDT 5
More
In-Stock
Push Button Switch (2PIN) Robotics Bangladesh
Quick view

Reference: RBD-0761

Push Button Switch (2PIN)

Breadboard friendly Mounting Style: Through Hole Mounting Direction: Vertical

Price BDT 5
More
In-Stock
Jumper Wire Single 30cm Robotics Bangladesh
Quick view

Reference: 1353

Jumper Wire Single 30cm

Length: 12.5 inches/30 CM (Long) Material: Copper Plated Pin Spacing: 2.54mm.

Price BDT 5
More
Out of Stock
Buzzer
Quick view

Reference: RBD-0758

BC547 NPN Transistor

BC547 NPN DIP Transistor

Price BDT 4
More
In-Stock
All best sellers
Arduino Pro Micro 5V/16MHz Type-C Robotics Bangladesh
  • Arduino Pro Micro 5V/16MHz Type-C Robotics Bangladesh

Arduino Pro Micro 5V/16MHz Type-C

RBD-2053
  • ATMEGA32U4 running in 5V / 16MHz
  • Support Arduino IDE V1.0.1
  • Micro USB interface programming on the board
  • Four 10-bit ADC pin
  • 12 digital I / O (5 PWM capability)
  • Rx and Tx hardware serial connection. RoboticsBD
BDT 755
rating Read the 2 reviews
Average rating: 5/5 - Number of reviews: 2
Quantity
In-Stock

40 people have purchased this item recently
67 people added this item to the cart in last 10 days
13 items in stock
  • Store Pickup Available! Store Pickup Available!
  • Free Ship Over 5000 BDT Free Ship Over 5000 BDT
  • Quality Product Quality Product
  • No Warranty No Warranty
  • No Replacement No Replacement

This Pro Micro 5V 16M Mini Leonardo Microcontroller Development Board For Arduino development board has 4 channel 10 bit ADC, 5 PWM pins, 12 DIO, and a hardware serial connection Rx and Tx you are familiar with Running on 16MHz and 5V, this board will remind you a lot of other Arduino compatible boards that you like.

There is a voltage regulator on board, so it can accept up to 12V DC. RoboticsBD

The Micro is a microcontroller board based on the ATmega32U4. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a Type C USB connection, an ICSP header, and a reset button. RoboticsBD

It contains everything needed to support the microcontroller; simply connect it to a computer with a Type C USB cable to get started. It has a form factor that enables it to be easily placed on a breadboard.  Featured By RoboticsBD.

The Micro board is similar to the Arduino Leonardo in that the ATmega32U4 has built-in USB communication, eliminating the need for a secondary processor. This allows the Micro to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial / COM port.

If you supply an unstable power supply board, be sure to connect to the “RAW”, not on the VCC pin. It has also added a PTC fuse and diode protection to the power circuit and to correct the RX and LED TX circuits. RoboticsBD

 

Note: Product images/ Components brand may vary from actual product as our stock rotates.

Features :

  1. ATMEGA32U4 running in 5V / 16MHz Type C
  2. Support Arduino IDE V1.0.1
  3. Type C USB interface programming on the board
  4. Four 10-bit ADC pin
  5. 12 digital I / O (5 PWM capability)
  6. Rx and Tx hardware serial connection.
Layout:

Product Images are shown for illustrative purposes only and may differ from the actual product.

General Specification
Microcontroller ATmega32U4
Input Voltage(Recommended) 7-12V
Operating Voltage (VDC) 5
Input Voltage (limits) 6-20V
Analog I/O Pins 12
Digital I/O Pins 20
DC Current per I/O Pin (mA) 20
DC Current for 3.3V Pin (mA) 50
PWM Pins 7
Flash Memory 32 KB
EEPROM 2.5KB
SRAM 1
Clock Speed 16 MHz
Dimensions (mm) LxWxH 48x18x8
Weight (gm) 13
Shipment Weight 0.06 kg
Shipment Dimensions 8 × 6 × 4 cm

Please allow 5% measuring deviation due to manual measurement.

Documentation :

  1. Arduino Pro Micro Driver
  2. Windows Driver Installation Guide
  3. Hookup Guide
  4. Arduino Pro-micro Schematics

Package Includes :

1 x Arduino Pro Micro 5V/16MHz

What is the price of Arduino Pro Micro 5V/16MHz Type-C in Bangladesh?

The latest price of Arduino Pro Micro 5V/16MHz Type-C in Bangladesh is BDT 755 You can buy the Arduino Pro Micro 5V/16MHz Type-C at best price from our RoboticsBD or visit RoboticsBD Office.

Please note that the product information provided on our website may not be entirely accurate as it is collected from various sources on the web. While we strive to provide the most up-to-date information possible, we cannot guarantee its accuracy. We recommend that you always read the product labels, warnings, and directions before using any product.

Product Images are shown for illustrative purposes only and may differ from the actual product.

Product Details
RBD-2053
13 Items
very good
rating
04/01/2024
zubayer
very good
PRO MICRO ARDUINO
rating
26/11/2022
Reaz
Nice
You might also like
Arduino Mega 2560 R3 Robotics Bangladesh
Quick view

Reference: RBD-0009

Arduino Mega 2560 R3

54 Digital I/O terminals (14 of which have programmable PWM outputs). 16 Analog Inputs. 4 UARTs (hardware serial ports). 16 MHz crystal clock. RoboticsBD Operating voltage: 6 ~ 12v. Dimensions: 110 x 53 x 15 mm.

Price BDT 1,895
More
In-Stock
Arduino Nano
Quick view

Reference: RBD-0032

Arduino Nano

USB Driver: CH340 Operating Voltage (logic level): 5V With Mini USB 8 analog inputs ports: A0 ~ A7 14 Digital input / output ports: TX, RX, D2 ~ D13 1 pair of TTL level serial transceiver ports RX / TX Using Atmel Atmega328P-AU MCU There is a bootloader installed in it Standard 0.1” spacing DIP (breadboard friendly). Manual reset switch. Please select...

Price BDT 410
More
In-Stock
On sale! Arduino Uno R3
Quick view

Reference: RBD-0094

Arduino Uno R3

The Arduino Uno R3 High-Quality Edition Arduino UNO in Bangladesh Micro-controller : ATmega328. Operating Voltage : 5V. Input Voltage (recommended) : 7-12V. Digital I/O Pins : 14 (of which 6 provide PWM output). Analog Input Pins : 6. The Arduino Uno R3 High-Quality Edition embodies superior craftsmanship and meticulous attention to detail, resulting in...

Price BDT 1,050
More
In-Stock
BreadBoard (Cheap Version)
Quick view

Reference: RBD-0133

MB102 Breadboard (Large)

830 Solder-less Points Ideal for Experimenting With Circuit Design In Labs Compatible with resistance, diodes, transistors, LED’s, Capacitors and other types of electronic components Colored coordinates for easy components placement. Accept a variety of wire sizes 20-29 AWG

Price BDT 159
More
In-Stock
Arduino Due Robotics Bangladesh
Quick view

Reference: RBD-0136

Arduino Due

Microcontroller: AT91SAM3X8E Operating Voltage: 3.3V Input Voltage (recommended): 7-12V Input Voltage (limits): 6-16V Digital I/O Pins: 54 (of which 12 provide PWM output) Analog Input Pins: 12 Analog Outputs Pins: 2 (DAC) A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock. CPU clock at 84Mhz 96KBytes of SRAM

Price BDT 3,990
More
In-Stock
Breadboard Power Supply Module 3.3V 5V
Quick view

Reference: RBD-0549

Breadboard Power Supply Module 3.3V 5V

Breadboard power supply module, compatible with 5V, 3.3V. RoboticsBD Apply to MB102 breadboard Input voltage: 6.5-12 V (DC) or USB power supply Output voltage: 3.3V/5V can switch over Maximum output current: <700 ma Fluctuation two road independent control can switch over to 0 V, 3.3 V, 5 V On-board two groups of 3.3V, 5V DC output plug pin, convenient...

Price BDT 95
More
In-Stock
Breadboard Jumper Wire Set Robotics Bangladesh
Quick view

Reference: RBD-1153

Breadboard Jumper Wire Set

135 quality jumper Color: red, orange, yellow, green, blue, purple, gray, brown, white. Box size: 165 × 55 × 10 (LxWxH) mm. 140 pcs of 22 AWG solid wires

Price BDT 190
More
In-Stock
Arduino Pro Mini 328 5V/16Mhz Robotics Bangladesh
Quick view

Reference: RBD-1523

Arduino Pro Mini 328 5V/16Mhz

Microcontroller: ATmega328P Circuit Operating Voltage: 5V Clock frequency: 16MHz. 6 PWM port: D3, D5, D6, D9, D10, D11. Use For Atmel Atmega328P-AU microcontroller. Support serial download. Support 9V battery. A pair of TTL level serial port transceiver : RX / TX.

Price BDT 430
More
In-Stock
30 other products in the same category:
On sale! STM32F103C8T6 Blue Pill Development Board Robotics Bangladesh
Quick view

Reference: RBD-0350

STM32F103C8T6 Blue Pill Development Board

100% Brand new and high quality STM32 Board Model: STM32F103C8T6. Core: ARM 32 Cortex-M3 CPU. Debug mode: SWD. 72MHz work frequency. 64K flash memory, 20K SRAM. RoboticsBD 2.0-3.6V power, I/O.

Price BDT 490
More
In-Stock
On sale! Arduino Uno R3 SMD Robotics Bangladesh
Quick view

Reference: RBD-0323

Arduino Uno R3 SMD

Microcontroller ATmega328 (SMD) – Interface CH340G Operating Voltage: 5V Input Voltage (recommended): 7-12V Digital I / O Pins 14 (of which 6 provide PWM output) RoboticsBD Analog Input Pins: 6 A programming cable is included.

Price BDT 574
More
In-Stock
LilyPad SMD LED Green Color Robotics Bangladesh
Quick view

Reference: RBD-2240

LilyPad SMD LED Green Color

Wearable e-textile technology.  Designed with large sew tabs LED Green Color

Price BDT 18
More
In-Stock
STM8S103F3P6 ARM STM8 Minimum System Development Board Module (Arduino Compatible)
Quick view

Reference: RBD-0576

STM8S103F3P6 ARM STM8 Minimum System Development Board Module (Arduino Compatible)

Chipboard STM32F103C8T6 On board, SWIM interface and reset button Micro USB line or the 2.54 pin to link to the power with the input voltage 4.5V-15V. Power light and the Demo indicator light Leads all the pins and has detailed label for the Pins. Support SWIM debug mode. RoboticsBD

Price BDT 450
More
In-Stock
New ESP32-S3 CAM Development Board WiFi Bluetooth Module N16R8 OV2640 Camera Robotics Bangladesh
Quick view

Reference: RBD-2789

ESP32-S3 CAM Development Board WiFi Bluetooth Module N16R8 OV2640 Camera

The ESP32-S3 WROOM Development Kit 2 is a comprehensive development solution based on the ESP32-S3-WROOM-1 module, featuring an onboard PCB antenna and advanced peripherals. This kit comes bundled with an OV2640 camera, providing a complete hardware platform for prototyping and developing IoT, AI, and wireless communication applications.

Price BDT 1,999
More
In Stock
Altera Cyclone IV EP4CE6 FPGA Development Board NIOSII EP4CE PCB and USB Blaster Jtag AS Programmer Robotics Bangladesh
Quick view

Reference: RBD-1827

Altera Cyclone IV EP4CE6 FPGA Development Board NIOSII EP4CE PCB and USB Blaster Jtag AS Programmer

Altera Cyclone IV EP4CE6 FPGA Development Board NIOSII EP4CE PCB  USB Blaster Jtag AS Programmer

Price BDT 14,225
More
In-Stock
New Arduino Uno R4 Wifi
Quick view

Reference: RBD-2850

Arduino Uno R4 Wifi

Next-Gen UNO: Powerful 32-bit board with built-in Wi-Fi and Bluetooth for versatile IoT projects. Enhanced Performance: Increased speed, memory, and processing power compared to previous UNO models. Beginner-Friendly: Maintains the classic UNO form factor and familiar Arduino development environment. Built-in Extras: 12x8 LED matrix, Qwiic connector, and...

Price BDT 2,480
More
Out of Stock
Nextion NX3224T024 - Generic 2.4" TFT LCD Touch Display Robotics Bangladesh
Quick view

Reference: RBD-1217

Nextion NX3224T024 - Generic 2.4" TFT LCD Touch Display

Nextion is a seamless Human Machine Interface (HMI) solution. Nextion provides a control and visualization interface between a human and a process, machine, application or appliance.  Nextion is mainly applied to Internet of thing (IoT) or consumer electronics field.

Price BDT 3,099
More
In-Stock
NodeMCU ESP8266 with 0.96 Inch OLED Module Development Board Robotics Bangladesh
Quick view

Reference: RBD-1255

NodeMCU ESP8266 with 0.96 Inch OLED Module Development Board

Integrated 0.96″ OLED Micro USB connection Compatible with Arduino Compatible with NodeMCU(Lua for ESP8266) Input Power 5V Compatible for Arduino Compatible with NodeMCU(Lua for ESP8266)A high-quality USB cable is essential for this board to ensure sufficient current supply; otherwise, your board may not be recognized by the Windows Device Manager. Please...

Price BDT 1,250
More
In-Stock
NodeMcu Lua WIFI Board Based on ESP8266 CP2102 Module Robotics Bangladesh
Quick view

Reference: RBD-1821

NodeMcu Lua WIFI Board Based on ESP8266 CP2102 Module

Open-source, Interactive, Programmable, Low cost, Simple, Smart, WI-FI enabled Arduino-like hardware IO Integrated TR switch, balun, LNA, power amplifier and matching network Integrated PLL, regulators, DCXO and power management units Onboard USB to serial chip to easily program and upload codes from the Arduino IDE Easy to use breadboard friendly form...

Price BDT 650
More
In-Stock
Mini Mega 2560 PRO (Embed)...
Quick view

Reference: RBD-1214

Mini Mega 2560 PRO (Embed) CH340G/ATmega2560-16AU

The board is compatible with Mega 2560.  excellent solution for developing projects based on ATmega2560. The board can be powered directly through the Micro USB connector The maximum output current upon 5V is around 800mA, while on the 3.3V it is about 800mA.

Price BDT 1,590
More
In-Stock
AVRISP Atmel STK500 AVR programmer USB Atmega Attiny Robotics Bangladesh
Quick view

Reference: RBD-1110

AVRISP Atmel STK500 AVR programmer USB Atmega Attiny

Supports a wide range of ATMEL AVR microcontroller. Works with AVR Studio or WINAVR(GCC) Works with ATMEL AVR Studio 4.13

Price BDT 2,900
More
In-Stock
On sale! Arduino LilyPad 328 ATmega328P
Quick view

Reference: RBD-0682

Arduino LilyPad 328 ATmega328P

Microcontroller: ATmega168 or ATmega328V Operating Voltage: 2.7-5.5 V Digital I/O Pins: 14 PWM Channels: 6 Analog Input Channels: 6 DC Current per I/O Pin: 40 mA Board will run from 2V to 5V. The latest version of the LilyPad supports automatic reset for even easier programming. The back side of the LilyPad is now completely flat! RoboticsBD

Price BDT 699
More
In-Stock
New Arduino Esplora Joystick...
Quick view

Reference: RBD-2886

Arduino Esplora Joystick Photosensitive Sensor Board

Microcontroller: ATmega32u4 Operating Voltage: 5V Flash Memory: 32 KB of which 4 KB used by bootloader SRAM: 2.5 KB EEPROM: 1 KB Clock Speed: 16 MHz Made in China

Price BDT 4,950
More
In Stock
NodeMCU Mega WiFi R3 Atmega2560 ESP8266 32Mb Memory Board Robotics Bangladesh
Quick view

Reference: RBD-2138

NodeMCU Mega WiFi R3 Atmega2560 ESP8266 32Mb Memory Board

Arduino compatibility Full integration USB-TTL converter 32 Mb flash memory Dual microcontrollersA high-quality USB cable is essential for this board to ensure sufficient current supply; otherwise, your board may not be recognized by the Windows Device Manager. Please avoid using mobile phone cables and instead use the recommended cable available here:...

Price BDT 2,120
More
In-Stock
LilyPad SMD LED Red Color Robotics Bangladesh
Quick view

Reference: RBD-2239

LilyPad SMD LED Red Color

Wearable e-textile technology.  Designed with large sew tabs LED Red Color

Price BDT 18
More
In-Stock
AVR Microcontroller Learning Development Board Robotics Bangladesh
Quick view

Reference: RBD-1527

AVR Microcontroller Learning Development Board

Based on ATmega32 8 Bit microcontroller USB external programmer Included Datasheet, Manual, Software & Sample codes All Port pins pins available for peripheral interfacing

Price BDT 3,430
More
In-Stock
USB to Mini USB Cable 1M -...
Quick view

Reference: RBD-0621

USB to Mini USB Cable 1M - Arduino NANO

Connects Your Arduino Nano: Provides essential connection between your Arduino Nano and a computer for programming and power. Standard Compatibility: Features USB Type-A and Mini-B connectors for universal computer connectivity. Reliable Performance: Solid workmanship and high-quality materials ensure dependable data transfer. Flexible Design: 1-meter...

Price BDT 120
More
In-Stock
MicroPython Board R3 ATmega328P+ESP8266, 8Mb flash, USB-TTL CH340G, Micro-USB Robotics Bangladesh
Quick view

Reference: RBD-1603

MicroPython Board R3 ATmega328P+ESP8266, 8Mb flash, USB-TTL CH340G, Micro-USB

USB-TTL converter. Logic Level: 5V. Operating Supply Voltage: 5V. Digital I/O Pins: 14. Analog I/O Pins: 6.

Price BDT 1,199
More
In-Stock
Arduino UNO R4 WiFi Robotics Bangladesh
Quick view

Reference: RBD-2568

Arduino UNO R4 WiFi

The Arduino UNO R4 WiFi merges the RA4M1 microprocessor from Renesas with the ESP32-S3 from Espressif, creating an all-in-one tool for makers with enhanced processing power and a diverse array of new peripherals. With its built-in Wi-Fi® and Bluetooth® capabilities, the UNO R4 WiFi enables makers to venture into boundless creative possibilities....

Price BDT 3,520
More
In Stock
37 In 1 Sensor Module Board Set Kit For Arduino with Box Robotics Bangladesh
Quick view

Reference: RBD-1541

37 In 1 Sensor Module Board Set Kit For Arduino with Box

For beginners who are interested in Arduino A complete set of Arduino’s most common and useful electronic components Infrared sensor receiving module Laser sensor module Temperature and humidity sensor module Infrared sensor module 5v relay module Obstacle avoidance sensor module.

Price BDT 1,990
More
In-Stock
ESP32 S3-WROOM-1 Dual...
Quick view

Reference: RBD-2367

ESP32 S3-WROOM-1 Dual Type-C USB N16R8 Micropython Board

ESP32-S3-WROOM-1-N16R8(16M Flash/8SRAM) Powerful ESP32-S3 chip for enhanced processing capabilities Dual Type-C USB ports for easy connectivity Built-in Wi-Fi and Bluetooth for seamless communication 16MB flash memory for ample storage space 8MB PSRAM for efficient multitasking Micropython support for easy programming Ideal for IoT projects, robotics, and...

Price BDT 1,220
More
In-Stock
FREENOVE ESP32-S3-WROOM Camera Board Arduino Compatible Robotics Bangladesh
Quick view

Reference: RBD-2379

FREENOVE ESP32-S3-WROOM Camera Board Arduino Compatible

FREENOVE ESP32-S3-WROOM CAM Board (Compatible with Arduino IDE), Onboard Camera Wireless, Python C Code, Detailed Tutorial, Example Projects ESP32-S3-WROOM -> A powerful and small controller with onboard camera and wireless. 1GB Memory Card -> Can be inserted into the ESP32-S3 board to store files. (Included in this kit.) 2 tutorials with...

Price BDT 3,450
More
In Stock
3.5inch LCD Display Shield for Arduino with Touch Robotics Bangladesh
Quick view

Reference: RBD-2551

3.5inch LCD Display Shield for Arduino with Touch

Supports development boards such as Arduino UNO and Mega2560 for plug-in use without wiring 480X320 resolution, clear display Support 16-bit RGB 65K color display, display rich colors 8-bit parallel bus, faster than serial SPI refresh On-board 5V/3.3V level shifting IC, compatible with 5V/3.3V operating voltage Easy to expand the experiment with SD card...

Price BDT 1,990
More
In Stock
XNUCLEO-F411RE - Improved STM32 NUCLEO Board Robotics Bangladesh
Quick view

Reference: RBD-1133

XNUCLEO-F411RE - Improved STM32 NUCLEO Board

Compatible with NUCLEO-F411RE, onboard Cortex-M4 microcontroller STM32F411RET6 Arduino connectivity support, easy to connect with various Arduino shields and access the massive Arduino resources ST Morpho headers provide full access to all STM32 I/Os, easy for peripheral expansion Supports mbed, build prototype quickly by mbed SDK and online tools...

Price BDT 7,990
More
Last items in stock
Espressif ESP32-S3-DevKitC-1-N8R8 Robotics Bangladesh
Quick view

Reference: RBD-2366

Espressif ESP32-S3-DevKitC-1-N8R8

The ESP32-S3-DevKitC-1 Version 1.0 is an entry-level development board equipped with ESP32-S3-WROOM-1, ESP32-S3-WROOM-1U, or ESP32-S3-WROOM-2, a general-purpose Wi-Fi + Bluetooth® LE MCU module that integrates complete Wi-Fi and Bluetooth LE functions. Most of the I/O pins on the module are broken out to the pin headers on both sides of this board for...

Price BDT 3,250
More
Last items in stock
LILYGO® TTGO T-Display ESP32 WiFi And Bluetooth Development Board Robotics Bangladesh
Quick view

Reference: RBD-1806

LILYGO® TTGO T-Display ESP32 WiFi And Bluetooth Development Board

Based on ESP32 240MHz Xtensa dual-core 32-bit microprocessor Operating Voltage: 2.7V – 4.2V Working Current: 60mA Battery Charging Current: 500mA

Price BDT 2,650
More
In-Stock
STM32 STM32F407VET6 512K System Core Board Development Board Robotics Bangladesh
Quick view

Reference: RBD-1808

STM32 STM32F407VET6 512K System Core Board Development Board

Model: F407VE-512K STM32F407VET6 development board F407 microcontroller learning board STM32 system board

Price BDT 4,220
More
In-Stock
Nextion NX8048T050 - 5.0" LCD TFT HMI Touch Display Robotics Bangladesh
Quick view

Reference: RBD-1218

Nextion NX8048T050 - 5.0" LCD TFT HMI Touch Display

Model No.:NX8048T050 Display Type:011R(R:Resitive Touchscreen) Operating Voltage (VDC):4.75 ~ 7 Max. Operating Current (mA):410 Touch Type: Resistive Colors:65K (65536)

Price BDT 10,590
More
In-Stock
Arduino Pro Micro 5V/16MHz
Quick view

Reference: RBD-0838

Arduino Pro Micro 5V/16MHz

ATMEGA32U4 running in 5V / 16MHz Support Arduino IDE V1.0.1 Micro USB interface programming on the board Four 10-bit ADC pin 12 digital I / O (5 PWM capability) Rx and Tx hardware serial connection. RoboticsBD

Price BDT 870
More
In-Stock
Customers who bought this product also bought:
Jumper Wire Single 20cm Robotics Bangladesh
Quick view

Reference: RBD-1354

Jumper Wire Single 20cm

Length: 8 inches/20 CM (Long) Material: Copper Plated Pin Spacing: 2.54mm.

Price BDT 3
More
Out of Stock
Buzzer
Quick view

Reference: RBD-0758

BC547 NPN Transistor

BC547 NPN DIP Transistor

Price BDT 4
More
In-Stock
- BDT 5 Reduced price PC817 OPTOCOUPLER Robotics Bangladesh
Quick view

Reference: RBD-1441

PC817 OPTOCOUPLER

IC Name: PC817X Package/Case: DIP-4

Price BDT 10 Regular price BDT 15
More
In-Stock
Anti-static Stainless Steel High Precision Professional Tweezers Robotics Bangladesh
Quick view

Reference: 1169

Anti-static Stainless Steel High Precision Professional Tweezers

Please select your desired models from the list below.

Price BDT 170
More
Product available with different options
Collision Switch Module Robotics Bangladesh
Quick view

Reference: RBD-2443

Collision Switch Module

The Collision Switch Module is used to detect a collision with an object or to detect the limit of travel.

Price BDT 150
More
In Stock
RCWL-0516 Microwave Radar Sensor Module Human Body Induction Switch Module
Quick view

Reference: RBD-0622

RCWL-0516 Microwave Radar Sensor Module Human Body Induction Switch Module

Transmission signal processing control chip RCWL-9196 Wide operating voltage range 4.0V to 28.0V Penetrating detection capability, compared with the traditional infrared feeling PIR Adjustable Block time and distance Operating Current: 2.8mA (typical); 3mA (max) Detection Distance: 5-9m Transmitting Power: 20mW (typical); 30mW (max) RoboticsBD

Price BDT 150
More
In-Stock
360 Degree Rotary Encoder Brick Sensor Module Robotics Bangladesh
Quick view

Reference: RBD-2041

360 Degree Rotary Encoder Brick Sensor Module

Model : KY-040. Type : Incremental Encoder. Cycles per revolution (CPR) : 20. Working voltage : 0 – 5V. Material : PCB + Brass. Mounting Nut Thread diameter: 6.6mm Weight : 10 gm.

Price BDT 120
More
In-Stock
Cable for Arduino Nano (USB 2.0 A to USB 2.
Quick view

Reference: RBD-1131

Cable for Arduino Nano (USB 2.0 A to USB 2.0 Mini B) 30cm

Up to 480 Mbps data transfer rate. USB Type: Type-A to Mini-B Weight: 15 gm Length: 30 cm Exclusively designed for Arduino boards.

Price BDT 90
More
In-Stock