0.56 Inch 3 Digit 7 Segment LED Displays, Red Color

Reference: 1217

Nextion NX3224T024 - Generic 2.4" TFT LCD Touch Display

Nextion is a seamless Human Machine Interface (HMI) solution that provides a control and visualization interface between a human and a process, machine, application or appliance. Nextion is mainly applied to Internet of thing (IoT) or consumer electronics field.

Reference: 914

Max7219 4 Channel Dot Matrix Display Panel

MAX7219 Dot Matrix Module Microcontroller 4 In One Display with 5P Line

Reference: 1349

16x2 Serial LCD Module Display for Arduino Assembled

It is another great blue backlight LCD display. As the pin resources of Arduino controller is limited, your project may be not able to use normal LCD shield after connected with a certain quantity of sensors or SD card. However, with this I2C interface LCD module, you will be able to realize data display via only 2 wires. If you already has I2C devices in...

Reference: 353

0.96" Inch I2C OLED Display Yellow

Size: 0.96 Resolution: 128X64 Color: Blue, Yellow Viewing angle: greater than 160 degrees Low power consumption: 0.04W during normal operation Support wide voltage: 3.3V-5V DC Working temperature: -30-80 degrees Volume: 27MM * 27MM * 4.1MM Driver IC: SSD1306 Communication: IIC, only two I / O ports Backlight: OLED self light, no backlight

Reference: 399

Graphic LCD 84x48 (Nokia 5110) Black on White for Arduino

Specification:1. "LIGHT" linked with GND, the backlight to be lit.2. Need you to compress the screen and PCB tighter, might got loose after the delivery. 3. Use a 3.3V controller, otherwise the display could be quite vague.

Reference: 1634

OLED Display Module 0.91 Inch

I2C OLED Display Module 0.91 Inch I2C OLED DC 3.3V~5V Display Module

Reference: 339

Brand: Waveshare

3.5inch Resistive Touch Display (B) for Raspberry Pi

3.5inch Resistive Touch Display (B) for Raspberry Pi, 480×320, IPS Screen, SPI

Reference: 1218

Nextion NX8048T050 - 5.0" LCD TFT HMI Touch Display

Nextion is a seamless Human Machine Interface (HMI) solution that provides a control and visualization interface between a human and a process, machine, application or appliance. Nextion is mainly applied to Internet of thing (IoT) or consumer electronics field.

Reference: 1342

LCD Display 16x2 with Female Header

LCD Display 16x2 with Female Header

Reference: 235

Brand: SparkFun Electronics

Graphic LCD 128x64 STN LED Backlight

Description: This is a framed graphical LCD 64x128 with  LED backlight. This unit is a very clear STN type LCD with  a simple command interface. This new module includes the negative voltage circuitry on board!

Reference: 1332

I2C Graphic 128x64 LCD Adapter

This is I2C adapter for Graphic LCD 128x64, very suitable for interactive work with Arduino, Raspberry. In this adapter used driver MCP23017. For instruction and libraries you can find information here: www.gammon.com.au/forum/?id=10940 For change I2C adress you can folow infromation on bottom side of board.  Control of backlight: Normal backlight use...

Reference: 1540

EL Wire-Blue 3m With Pocket Inverter

EL wire is a thin copper wire coated in a phosphor that glows a 360 degree unbroken light when an alternating current is applied to it. It is bendable as a thin neon tube which makes it ideal for flexible decoration. It is great for car decoration, parties, camping and so on.

Reference: 661

Standard LCD 16x2

Standard LCD 16x2

Reference: 1167

Raspberry Pi 7inch HDMI Touchscreen LCD with Case

7inch HDMI LCD (C), 1024×600, IPS, with Bicolor case Original Waveshare Included:  7inch HDMI LCD (C) x 1 HDMI cable x 1 HDMI to Micro HDMI Adapter x 1 USB type A plug to micro B plug cable x 1 RPi screws pack (4pcs) x 1 Bicolor Case for 7inch LCD x 1 Screws Pack x 1 Quick start sheet x1

Reference: 161

20x4 Character LCD

20x4 Character LCD

Reference: 1537

EL Wire-White 3m With Pocket Inverter

EL wire is a thin copper wire coated in a phosphor that glows a 360 degree unbroken light when an alternating current is applied to it. It is bendable as a thin neon tube which makes it ideal for flexible decoration. It is great for car decoration, parties, camping and so on.

Reference: 1328

0.96" Inch I2C OLED Display White

Size: 0.96 Resolution: 128X64 Color: White Viewing angle: greater than 160 degrees Low power consumption: 0.04W during normal operation Support wide voltage: 3.3V-5V DC Working temperature: -30-80 degrees Volume: 27MM * 27MM * 4.1MM Driver IC: SSD1306 Communication: IIC, only two I / O ports Backlight: OLED self light, no backlight

Reference: 947

Raspberry Pi HDMI Touch Display 5 Inch 800x480

This 5 inch TFT Display with Touch Screen is a mini panel-mountable HDMI monitor. So small and simple, but you can use this display with any computer that has HDMI output, and the shape makes it easy to attach to an electronic product. Although the 800x480 common HDMI display is made for Raspberry Pi, we can use it other where not only for Raspberry Pi.

Reference: 401

LCD Module 8x2 Characters Display

BLUE COLORThis little 8-character, 2-line parallel liquid crystal display is a generic equivalent of the Optrex DMC-50448N-AAE-AD LCD. It is incorporated into our Orangutan SV-328 robot controllers, some versions of our  A-Star 32U4 Prime microcontroller boards,  

Reference: 234

Brand: SparkFun Electronics

LCD Cape - pcDuino V3 (1024x600 7" LVDS)

Description: This is a 7" LVDS LCD Cape for the pcDuino V3  with a 1024x600 screen resolution and capacitive touch from  LinkSprite. This massive screen is a great addition for the  pcDuino V3 that compliments its extreme versatility as a mini  PC development platform. 

Reference: 1164

LCD Display 16X2 with Header

This LCD comes with male header already soldered. So you don't have to worry about soldering it. You can straight connect it with the breadboard.

Reference: 924

TM1637 LED Display Module for Arduino

4 Bits 0.36Inch Clock RED Anode Digital Tube Four Serial Driver Board Control Interface: A total of four pins (GND, VCC, DIO, CLK), GND to ground, VCC is the power supply, DIO of data input and output pin, CLK is the clock signal pin;

Reference: 699

1.8" inch TFT LCD Display module ST7735S 128x160

1.8-inch color screen,support 65K color display,display rich colors 128X160 resolution, clear display Using the SPI serial bus, it only takes a few IOs to illuminate the display With SD card slot for convenient function expansion Provide underlying libraries and rich sample programs for Arduino, C51, and STM32 platforms Military-grade process standards,...

Reference: 1306

8*8 LED matrix module common anode of LED matrix

Dot Matrix Led Display

Reference: 305

3.5 inch RPi Display

320×480 resolution Resistive touch control Supports any revision of Raspberry Pi (directly-pluggable) Compatible with Raspberry Pi A, B, A+, B+, 2B, 3B, 3B+,4B versions Drivers provided (works with your own Raspbian/Ubuntu directly) Size perfectly fits the Pi High quality immersion gold surface plating Supports Raspbian system, ubuntu system ,kali Linux...

Reference: 1064

1.3" OLED Module White and Blue Color 128X64

Feature:Resolution: 128*64Control chip: SSH1106Display area: 29.42 x 14.7mmDriving voltage: 3.3-5VOperating temperature: -40 ℃ to 70 ℃Interface type: IIC/I2C  interfacePin definitions:1> GND (power ground)2> VCC (positive power supply)3> SCL (clock line)4> SDA (data line)

Reference: 384

MAX7219 Red Dot Matrix Module MCU Control Display Module DIY Kit For Arduino

Soldering is required

Reference: 1109

10 Digit LED Bar Graph Display

These 10 segment bar graph LEDs have many uses. With a compact footprint, simple hookup, they are easy for prototyping or finished products. Essentially, they are 10 individual blue LEDs housed together, each with an individual anode and cathode connection. We also carry these in red, and green. Note: The pinout on these bar graphs may vary from what is...

Reference: 1539

EL Wire-Red 3m With Pocket Inverter

EL wire is a thin copper wire coated in a phosphor that glows a 360 degree unbroken light when an alternating current is applied to it. It is bendable as a thin neon tube which makes it ideal for flexible decoration. It is great for car decoration, parties, camping and so on.

Reference: 1417

MAX7219 Dot Led Matrix LED Display Module

SMD-MAX7219-MODULE A single module can drive an 8 * 8 common cathode lattice Module Operating voltage: 5V. Module with input and output interfaces Supports multiple modules cascade Led color: Red 8x8 Dot Matrix Module - Cascadable, MAX7219