Length: 8.5 inches (Medium)
Material: Copper Plated.EachPin Spacing: 2.54mm.Color: Colorfulcompatible with 2.54mm mil spacing pin headers.It can be used for PCB project, pc motherboard, etc.Allow you to plug and unplug easily for prototyping.Package Contents: 1 x Jumper Wire
You will get only one pcs.
Arduino UNO in Bangladesh
The Arduino Uno is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller.
Nextion is a seamless Human Machine Interface (HMI) solution that provides a control and visualization interface between a human and a process, machine, application or appliance. Nextion is mainly applied to Internet of thing (IoT) or consumer electronics field.
Nextion is a seamless Human Machine Interface (HMI) solution that provides a control and visualization interface between a human and a process, machine, application or appliance. Nextion is mainly applied to Internet of thing (IoT) or consumer electronics field. It is the best solution to replace the traditional LCD and LED Nixie tube.
Nextion includes a hardware part (a series of TFT boards) and a software part (the Nextion editor). The Nextion TFT board uses only one serial port to communicate. It lets users avoid the hassle of wiring. We noticed that most engineers spend much time in application development but get unsatisfactory results. As a solution to this situation, Nextion editor has mass components such as button, text, progress bar, slider, instrument panel etc. to enrich the interface design. Furthermore, the drag-and-drop function ensures that users spend less time in programming, which will reduce 99% of their development workloads. With the help of this WYSIWYG editor, designing a GUI is a piece of cake.
It's easy to adapt Nextion family HMI to existing projects. Users just need to provide it a UART.
NX2432T024 is a powerful 2.4'' HMI, which is member of Nextion family. Features include: a 2.4" TFT 320 x 240 resistive touch screen display, 4M Flash, 2K Byte RAM, 65k colors.
Package includes a Basic Nextion 2.4'' display, a wire and a power supply test board.
Note: there's a small power supply test board and a wire for you to test if the electricity supply is enough or not. Please see below image on how to use it.
Check out the amazing features of this product below.
Features
320 x 240 Resolution
Compatible with Raspberry Pi A+, B+ and Raspberry Pi 2
RGB 65K true to life colours
TFT Screen with integrated 4-wire Resistive Touch Panel
Easy 4 pin interface to any TTL Serial Host
4M Flash memory for User Application Code and Data
On board micro-SD card for firmware upgrade
Visual Area:36.72mm(L)×48.96mm(W)
Adjustable Brightness:0~180 nit, the interval of adjustment is 1%
5V90mA power consumption
Generic using for all Arduino or Raspberry Pi project
Please visit our wiki page for more information about this product. Any suggestions for improvement, such as correcting errors, adding more demo codes or tutorials, will be highly appreciated.
Works fine.\r\nDO NOT CONNECT WITH A LOGIC LEVEL OF 5V.\r\nUse logic level converter if you have 5V logic signal.\r\nUse a 5V 1A power source to power the display.
Good
12/11/2020
Hasib
Good
Working well
22/09/2020
Shovon Sudan Saha
Comes in a nice packaging
Shipon
25/01/2020
Shipon
Nice product
Not a display, its HMI
18/11/2019
HM Rezoan Duranto
I thought this one was a display that I wanted to connect to RPI 4 but after receiving the product I found out that its an HMI Device. I liked it, so I kept it instead of returning.
EL wire is a thin copper wire coated in a phosphor that glows a 360 degree unbroken light when an alternating current is applied to it. It is bendable as a thin neon tube which makes it ideal for flexible decoration. It is great for car decoration, parties, camping and so on.
Size: 0.96 Resolution: 128X64 Color: Blue, Yellow Viewing angle: greater than 160 degrees Low power consumption: 0.04W during normal operation Support wide voltage: 3.3V-5V DC Working temperature: -30-80 degrees Volume: 27MM * 27MM * 4.1MM Driver IC: SSD1306 Communication: IIC, only two I / O ports Backlight: OLED self light, no backlight
This is an E-Ink display module, 1.54inch, 200x200 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.
Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on....
These 10 segment bar graph LEDs have many uses. With a compact footprint, simple hookup, they are easy for prototyping or finished products. Essentially, they are 10 individual blue LEDs housed together, each with an individual anode and cathode connection.
We also carry these in red, and green. Note: The pinout on these bar graphs may vary from what is...
Description: This is a 7" LVDS LCD Cape for the pcDuino V3
with a 1024x600 screen resolution and capacitive touch from
LinkSprite. This massive screen is a great addition for the
pcDuino V3 that compliments its extreme versatility as a mini
PC development platform.
Description
Pins : 10Forward Voltage : 2.2VPolarity : Common AnodeDimensions : 12.5 x 19mmHeight : 8mm without pins, 14mm with pinsWeight : 2.1gCommon-Cathode (CC)
For Standard LCD 16x2. Press here.
For Standard LCD 16x2 with Male Header. Press here
For Standard LCD 16x2 with Female Header. Press here
For Standard LCD 16x2 with I2C adapter board soldered. Press here.
For Standard LCD 16x2 with White Background. Press here.
For Standard LCD 16x2 with Blue Background. Press here.
Description:Item: Electronic ClockSize: 81mmx81mmThickness:1.6mmThickness: 1.6mmMaterial: FR4 Military GradeLED Color: RedVoltage Supply: 5V (Via the mini USB interface, not by batteries)Other accessories: Four Studs for Module Consolidation
This Kit sometimes comes unassembled. You might need a soldering iron to assemble it. Though the current stock...
4 Bits 0.36Inch Clock RED Anode Digital Tube Four Serial Driver Board
Control Interface: A total of four pins (GND, VCC, DIO, CLK), GND to ground, VCC is the power supply, DIO of data input and output pin, CLK is the clock signal pin;
5inch HDMI LCD with TouchScreen (B) + Bicolor Case
Installation Method & Driver
System Support: Raspberry Pi / Windows / Support any HDMI System with Touch
The LCD
800×480 high resolution
Resistive touch control
Supports Raspberry Pi
Supports Banana Pi / Banana Pro, comes with Lubuntu, Raspbian images
Supports BB Black, comes with Angstrom image...
For Standard LCD 16x2. Press here.
For Standard LCD 16x2 with Male Header. Press here
For Standard LCD 16x2 with Female Header. Press here
For Standard LCD 16x2 with I2C adapter board soldered. Press here.
For Standard LCD 16x2 with White Background. Press here.
For Standard LCD 16x2 with Blue Background. Press here.
For Standard LCD 16x2. Press here.
For Standard LCD 16x2 with Male Header. Press here
For Standard LCD 16x2 with Female Header. Press here
For Standard LCD 16x2 with I2C adapter board soldered. Press here.
For Standard LCD 16x2 with White Background. Press here.
For Standard LCD 16x2 with Blue Background. Press here.
As the pin resources of Arduino controller is limited, your project may be not able to use normal LCD shield after connected with a certain quantity of sensors or SD card. However, with this I2C interface LCD module, you will be able to realize data display via only 2 wires. If you already has I2C devices in your project, this LCD module actually cost no...
BLUE COLORThis little 8-character, 2-line parallel liquid
crystal display is a generic equivalent of the
Optrex DMC-50448N-AAE-AD LCD. It is
incorporated into our Orangutan SV-328
robot controllers, some versions of our
A-Star 32U4 Prime microcontroller boards,
1.8-inch color screen,support 65K color display,display rich colors
128X160 resolution, clear display
Using the SPI serial bus, it only takes a few IOs to illuminate the display
With SD card slot for convenient function expansion
Provide underlying libraries and rich sample programs for Arduino, C51, and STM32 platforms
Military-grade process standards,...
EL wire is a thin copper wire coated in a phosphor that glows a 360 degree unbroken light when an alternating current is applied to it. It is bendable as a thin neon tube which makes it ideal for flexible decoration. It is great for car decoration, parties, camping and so on.
SMD-MAX7219-MODULE
A single module can drive an 8 * 8 common cathode lattice
Module Operating voltage: 5V.
Module with input and output interfaces
Supports multiple modules cascade
Led color: Red
8x8 Dot Matrix Module - Cascadable, MAX7219
For Standard LCD 16x2 with Male Header. Press here
For Standard LCD 16x2 with Female Header. Press here
For Standard LCD 16x2 with I2C adapter board soldered. Press here.
For Standard LCD 16x2 with White Background. Press here.
For Standard LCD 16x2 with Blue Background. Press here.
Size: 0.96 Resolution: 128X64 Color: White Viewing angle: greater than 160 degrees Low power consumption: 0.04W during normal operation Support wide voltage: 3.3V-5V DC Working temperature: -30-80 degrees Volume: 27MM * 27MM * 4.1MM Driver IC: SSD1306 Communication: IIC, only two I / O ports Backlight: OLED self light, no backlight
Digit height: 0.56 inch
Dimensions: 50.3 x 19.0 x 8.0 mm
Digit quantity: 3 Digit
Available Emitting color: Red/Yellow Green/Yellow/Amber/Blue/White/Pure Green
Surface color: Black/Gray (white epoxy)
Epoxy colors: Red
Polarity: Common Anode
Original Waveshare
The LCD and Control BoardIPS screen,1280x800 high resolutionCapacitive touch control supports up to ten-points touchWhen works with Raspberry Pi, supports Raspbian, Ubuntu, single touch, and driver freeWhen working as a computer monitor, supports Windows 10/8.1/8/7, ten-points touch, and driver freeSupports Banana Pi, Banana Pro, comes...
This is I2C adapter for Graphic LCD 128x64, very suitable for interactive work with Arduino, Raspberry.
In this adapter used driver MCP23017. For instruction and libraries you can find information here: www.gammon.com.au/forum/?id=10940
For change I2C adress you can folow infromation on bottom side of board.
Control of backlight: Normal backlight use...
EL wire is a thin copper wire coated in a phosphor that glows a 360 degree unbroken light when an alternating current is applied to it. It is bendable as a thin neon tube which makes it ideal for flexible decoration. It is great for car decoration, parties, camping and so on.
For Standard LCD 16x2. Press here.
For Standard LCD 16x2 with Male Header. Press here
For Standard LCD 16x2 with Female Header. Press here
For Standard LCD 16x2 with I2C adapter board soldered. Press here.
For Standard LCD 16x2 with White Background. Press here.
For Standard LCD 16x2 with Blue Background. Press here.
Arduino UNO in Bangladesh
The Arduino Uno is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller.
Superbright Ultra Violet LED UV Lamp 5mm 2500mcd
**Damage from UV exposure is cumulative and increases your skin cancer risk over time. So be careful when you use it.
1) A complete GPS module with an active antenna integrated, and a built-in EEPROM to save configuration parameter data.2) Built-in 25 x 25 x 4mm ceramic active antenna provides strong satellite search capability.3) Equipped with power and signal indicator lights and data backup battery.4) Power supply: 3-5V; Default baud rate: 9600bps.5) Interface: RS232...
Nextion is a seamless Human Machine Interface (HMI) solution that provides a control and visualization interface between a human and a process, machine, application or appliance. Nextion is mainly applied to Internet of thing (IoT) or consumer electronics field.
