- Raspberry Pi
- Mini Computer/ PC
- 3D Printer
- Arduino Shield
- Robotics Parts
- Home Automation
- Industrial Shield
- Industrial IC
- Motor Driver
- Communication Module
- Robot Platform Chassis
- 3D Printed
- Power Adapter
- PLC Programming Cable
- Tools, Hardware & Accessories
- Thermal Printer
- Solar Panel
- Battery & Charger
Arduino UNO in Bangladesh The Arduino Uno is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller.
I2C Bi-directional Logic Level Converter
- Tiny, space saving design 13mm x 11mm
- On-board 3.3V 250mA voltage regulator
- 2-way bi-directional mosfet logic level conversion
- Works with I2C
- Breadboard friendly pin connections spaced at 0.1in and 0.4in apart
Store Pickup Available!
- We have taken our popular 4-way Logic Level Converter and shrunk it to make this 2-way bi-directional Logic Level converter specifically for I2C communication between 5V and 3V systems. Ideal for connecting sensors operating at 3V to microcontroller systems running at 5V. There is even a 3.3V voltage regulator on board to power the 3V side.
- Connection couldn't be easier. On the left, we have the connections to the 5V system (including 5V to supply power to the regulator), and on the right are the connections to the 3V side (including the 3.3V output from the regulator)
- Each mosfet has 10k pullup resistors on the 5V and 3.3V side so it works great with I2C.
The Keweisi KWS-10VA is great for checking 5V USB loads. We use one of these devices with an Original iPad charger for testing general charging issues There are two ports on the device, however they are connected together, so we don’t suggest charging multiple devices at once. For convenience however, you can connect a Micro USB, and Lightning cable (for...
Features Otto is Open-Source, Arduino-compatible, and 3d-printable two-legged. Using your computer's USB port, it can be easily programmed from any computer to walk, dance, sing, and avoid obstacles. This listing includes all the parts needed to build an Otto DIY robot. This is a Kit Version. You have to build it using our provided tutorial.
JT308 RFID Card Reader - 125Khz The RFID Card Reader is small in size and it is an EM card reader with a USB interface. It reads the ID number from the EM 4100 card or a compatible card. After detecting the card, the card number will be sent directly via the USB interface, just like the entry number from the USB keyboard.
XNUCLEO-F411RE Features Compatible with NUCLEO-F411RE, onboard Cortex-M4 microcontroller STM32F411RET6 Arduino connectivity support, easy to connect with various Arduino shields and access the massive Arduino resources ST Morpho headers provide full access to all STM32 I/Os, easy for peripheral expansion Supports mbed, build prototype quickly by mbed SDK...
Brand: SparkFun Electronics
Arduino Mega in Bangladesh The Arduino Mega is a microcontroller board based on the ATmega2560 (datasheet). It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything...
Powerful STM32 32-bit microcontroller running at 90MIPs with 128KB Flash and 20KB RAM. 3-axis high-performance MEMs gyros and 3-axis high-performance MEMs accelerometer. Tiny 36mmx36mm 4 layer PCB for superior electrical noise reduction and flight performance. Software support for Windows, Mac, and Linux. Direct high-speed USB support with no drivers...
DC Voltage:2.5-6V Maximum lift:40-110cm / 15.75"-43.4" Flow rate:80-120L/H Outside diameter of water outlet: 7.45mm / 0.3" (our 7mm inner diameter tube is ok for this pump) Inside diameter of water outlet: 4.7mm / 0.18" Diameter:Approx. 24mm / 0.95" Length:Approx. 45mm / 1.8" Height:Approx. 33mm / 1.30" Material:engineering plastic Driving mode: brushless...
রাস্পবেরি পাই ৩ মডেল বি প্লাস পৃথিবীর অন্যতম ক্রেডিট কার্ড সাইজের শক্তিশালী কম্পিউটার। এটি ফুল এইচডি ভিডিও প্লেব্যাক সমর্থন করে। এটি মূলত লিনাক্স অপারেটিং সিস্টেম সাপোর্ট করে। অনেক ধরনের প্রোগ্রাম ডেভলপ করা যায়। কি কি থাকছে ? ১ টি রাস্পবেরি পাই ৩ মডেল বি প্লাস (মেড ইন UK) ১ টি রাস্পবেরি কেস রাস্পবেরি পাই এর হিট সিংক রাস্পবেরি পাই এর কমপ্যাটিবল পাওয়ার...
J1800 Windows 10 Pro Mini PC 2GB RAM + 32GB SSD (V2) Processor: Intel J1800 2.41Ghz Processor RAM: 2GB DDR3L SSD: 32GB mSata Built-in Wi-Fi with Dual Antenna 1xUSB 3.0 & 4xUSB 2.0 RJ45 Network Port/ LAN Pre-Installed Windows 10 SATA Port: Yes Solid Industrial Grade Aluminum Casing Windows 10 Pre-Installed. Power Input: DC12V
This 5 inch TFT Display with Touch Screen is a mini panel-mountable HDMI monitor. So small and simple, but you can use this display with any computer that has HDMI output, and the shape makes it easy to attach to an electronic product. Although the 800x480 common HDMI display is made for Raspberry Pi, we can use it other where not only for Raspberry Pi.
10.1 inch resolution(1024x600) TFT Monitor,Clear Screen. Multifunctional Monitor Screen: HDMI/VGA/BNC/USB/AV Input, Dual High-quality Built-in Speakers Support Raspberry Pi & Windows PC Automatically. Built-in Media Player with Remote.