- Raspberry Pi
- Mini Computer/ PC
- 3D Printer
- Arduino Shield
- Robotics Parts
- Home Automation
- Industrial Shield
- Industrial IC
- Motor Driver
- Communication Module
- Robot Platform Chassis
- 3D Printed
- Power Adapter
- PLC Programming Cable
- Tools, Hardware & Accessories
- Thermal Printer
- Solar Panel
- Battery & Charger
Arduino UNO in Bangladesh The Arduino Uno is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller.
Servo Motor Mini
Store Pickup Available!
Free Ship Over 5000 BDT
Servo is a good choice for most park flyers and helicopters. Hobbyists from around the world has used the SG90/ SG91 on famous planes like GWS Slow Stick, E-Flite Airplanes, Great Planes, Thunder Tiger, Align, EDF jets and more. If you are looking for a servo that won't break your arm or leg, this is the perfect choice for you!
The Servo Motor Mini weighs 0.32 ounces (9.0 grams). Total weight with wire and connector is 0.37 ounces (10.6 grams).
Servo Motor Mini has the universal "S" type connector that fits most receivers, including Futaba, JR, GWS, Cirrus, Blue Bird, Blue Arrow, Corona, Berg and Hitec.The wire colors are Red = Battery(+) Brown = Battery(-) Orange = Signal
- Dimensions (L x W x H) = 0.86 x 0.45 x 1.0 inch (22.0 x 11.5 x 27 mm)
- Weight = 0.32 ounces (9 grams)
- Weight with wire and connecter = 0.37 ounce (10.6 grams)
- Stall Torque at 4.8 volts = 16.7 oz/in (1.2 kg/cm)
- Operating Voltage = 4.0 to 7.2 volts
- Operating Speed at 4.8 volts (no load) = 0.12 sec/ 60 degrees
- Connector Wire Length = 9.75 inches (248 mm)
- Universal "S" type connector fits most receivers
CE Passed 1100GPH Seaflo Marine Submersible Water Bilge Pump 12V 3Amp 12 Volt bilge pump 1100 gallons per hour 1-1 / 8 "tubing (29mm) ID size 3 Amp draw 3 1/2" (107 mm) Overall height x 2 3/8 "(60mm) diameter
Description: Voltage/current: 12V DC.Horse Power Cont.: 5W RPM: 300.Length of Motor (including spindle): 76.1mmDiameter: 37mm Shaft length: 15mm Shaft diameter: 6mm Weight: 185g
DC Gear Motor 12V DC 100 RPM Features:Small volume, torsion big, all metal gear, durable, not easy to wear.Great replacement for the rusty or damaged DC geared speed reduce motor on the machine.Widely used on Boat, Car, Electric Bicycle, Fan, Home Appliance.Package Included:1x Gear Motor
Continuous rotation servos are standard hobby RC servos that have been modified to offer open-loop speed control instead of their usual closed-loop position control. The modification effectively turns them into motors with integrated motor drivers. Just throw on a wheel and you have a drive system for your robot that can be controlled using Arduino.
2pieces 8.5x20mm Coreless Motor and 2pieces 55mm Propeller (Clockwise and Anti-clockwise)
Pump motor DC brushless motor no spark of work. Can connect the car power, 12V battery can work, mobile convenience. Pump motor shaft with high degree of wear-resistant ceramic shaft continuous service life of about 2000 hours. CE, RoHS Certified Input Voltage: DC 12V; Max Water Head: 5m.
12V High Torque Turbo Worm Gear DC Motor with Metal Gearbox 54 RPM-45KG.CM Torque Model: JGB37-550 RPM: 100 Torque: 35KG.CM
Features: Model: HC-1 Quantity: 1 Color: Transparent + Yellow Material: Acrylic Working voltage: 3~12V RPM: 120 (Under 3V) Gear motor deceleration indicator Chassis made from acrylic material With installation holes, easy to use Great for DIY project Dimensions: 7.72 in x 4.13 in x 0.12 in (19.6 cm x 10.5 cm x 0.3 cm) Weight: 14.29 oz (405 g)
Nema 23 23HS5628 Stepper Motor 57 motor 165 Oz-in 56mm 2.8A DIA Step angle accuracy: + - 5%(full step,not load) Resistance accuracy: + - 10% Inductance accuracy: + - 20% Temperature rise: 80deg Max(rated current,2 phase on) Ambient temperature ----------—20deg ~+50deg Insulation resistance:100MΩ Min,500VDC Insultion Strength--------500VAC for one minute...
3D Printed Pan Tilt Camera Mount With Servo Motor Package Include: 1x 3D Printed Pan Tilt Bracket 2x 9g Servo Motor (Assambled with the Pan Tilt Bracket) Fully assembled 3D Printed (ABS Filament) strong Pan Tilt Camera Mount With Servo Motor 9g
It looks like a servo, it acts like a servo, but it's more than just a servo! We got a factory to custom-make these classic 'standard' sized hobby servos with a twist - the feedback (potentiometer wiper) line is brought out to a fourth white wire. You can read this wire with an analog input such as those on an Arduino, to get the servo's position.
12V High Torque Turbo Worm Gear DC Motor with Metal Gearbox 54 RPM-45KG.CM Torque Model: JGB37-550 RPM: 54 Torque: 40KG.CM
Features of 60 RPM High Torque 12 Volt DC Gear Motor: 60RPM 12V DC motors with Metal Gearbox and Metal Gears. 20000 RPM base motor. 6mm Dia shaft with M3 thread hole. Length 63 mm without shaft. Shaft length 30mm. 275gm weight. 20 kg cm torque. No-load current = 0.15 mA, Load current = upto 4 A(Max).
DC Voltage:2.5-6V Maximum lift:40-110cm / 15.75"-43.4" Flow rate:80-120L/H Outside diameter of water outlet: 7.45mm / 0.3" (our 7mm inner diameter tube is ok for this pump) Inside diameter of water outlet: 4.7mm / 0.18" Diameter:Approx. 24mm / 0.95" Length:Approx. 45mm / 1.8" Height:Approx. 33mm / 1.30" Material:engineering plastic Driving mode: brushless...
Voltage: 5VDiameter: 28mmStep angle: 5.625 x 1 / 64Reduction ratio: 1 / 64Stepper Motor Driver Board with ULN2003A, B, C, D four-phase LED indicates the status of the stepper motor workStepper motor with a standard interface, when used directly pluggable