How to Place an Order
Store Pick Up
Request for Quotation/ International Sourcing
Order Status
Reference: RBD-1354
Length: 8 inches/20 CM (Long) Material: Copper Plated Pin Spacing: 2.54mm.
Reference: RBD-0351
Contactless transmission of data and supply energy (no battery needed) Operating distance: Up to 100mm (depending on antenna geometry) RoboticsBD Operating frequency: 13.56MHz Data transfer: 106 kbit/s Data integrity: 16 Bit CRC, parity, bit coding bit counting Anticollision Typical ticketing transaction: <100 ms ( including backup management)...
Reference: 0245
Choose your desire Resistor value from below:
Reference: 0031
3 Types Available (Please select from option) 1. Male to Male 2. Male to Female 3. Female-Female
Reference: RBD-0768
Size: 5mm Color: RED Head Shape: Round Lens Appearance: Transparent
Reference: RBD-0761
Breadboard friendly Mounting Style: Through Hole Mounting Direction: Vertical
Reference: RBD-1360
PN junction rectifier diode. One direction flow of Current. Used for conversion of AC power to DC. 1N 4007 is electrically compatible with other rectifier diodes Used instead of any of the diode belonging to 1N400X series
This Gravity: liquid flow sensor is designed based on the electromagnetic principle. It adopts an O-ring rubber seal and uses silicone sealant at the outlet end to strength water-resistance. With high anti-interference and anti-impact, the sensor offers reliable performance and long service life. Also, it is designed with G1/4 thread connectors for easy installation.
Store Pickup Available!
Free Ship Over 5000 BDT
Quality Product
No Warranty
No Replacement
This Gravity: liquid flow sensor is designed based on the electromagnetic principle. It adopts an O-ring rubber seal and uses silicone sealant at the outlet end to strength water-resistance. With high anti-interference and anti-impact, the sensor offers reliable performance and long service life. Also, it is designed with G1/4 thread connectors for easy installation.
The sensor can be used with microcontrollers like Arduino UNO to measure the flow of liquids with high concentration and low viscosity like water, diesel, engine oil, milk, paint, detergent, honey, etc. (no impurity in liquid)
The latest price of Gravity Liquid Flow Sensor (G1/4) in Bangladesh is BDT 3,750 You can buy the Gravity Liquid Flow Sensor (G1/4) at best price from our RoboticsBD or visit RoboticsBD Office.
|
Please note that the product information provided on our website may not be entirely accurate as it is collected from various sources on the web. While we strive to provide the most up-to-date information possible, we cannot guarantee its accuracy. We recommend that you always read the product labels, warnings, and directions before using any product. |
|
Product Images are shown for illustrative purposes only and may differ from the actual product. |
Reference: RBD-2965
Introducing the latest addition to RoboticsBD's product lineup, the 5MPa Stainless Steel Pressure Transducer Sensor. Crafted with high-quality stainless steel, this pressure transducer offers exceptional rigidity and durability, making it ideal for a variety of applications.
Reference: RBD-3091
Brand: DFRobot
This is a water pressure sensor adopts DFRobot Gravity 3-pin interface. It supports standard 5V voltage input and 0.5~4.5V linear voltage output. It is compatible with multiple Arduino controllers.
Reference: RBD-2979
Working voltage: DC1.8-7V(low consumption version)，7-24V(regular version), 7-24V(PLC version) Rated voltage: 7 to 24 V Pulse output duty cycle: 50+-10% Insulation resistance: 100M Ohm and above Input/Output Diameter: 9.5mm
Reference: RBD-2982
Measures water flow from 10 to 200 liters per minute. Hall-effect sensor for accurate pulse signal output. Durable plastic body; waterproof, heat-resistant, and pressure-resistant. Suitable for industrial flow measurement applications. Easy installation and maintenance.
Reference: RBD-2967
Introducing the latest addition to RoboticsBD's product lineup, the 0.2MPa Stainless Steel Pressure Transducer Sensor. Crafted with high-quality stainless steel, this pressure transducer offers exceptional rigidity and durability, making it ideal for a variety of applications.
Reference: RBD-2962
Introducing the latest addition to RoboticsBD's product lineup, the 1.6MPa Stainless Steel Pressure Transducer Sensor. Crafted with high-quality stainless steel, this pressure transducer offers exceptional rigidity and durability, making it ideal for a variety of applications.
Reference: RBD-2147
The built-in 24bit AD converter. Immersion gold PCB, high quality, machine welding process to ensure quality. Power supply: 3 – 5V ( internal low dropout regulator ). Communication modes: Standard the IIC / SPI communication protocol.
Reference: RBD-2981
Model: YF-S402C Specification: G3/8 Input/output size: 15mm Operating voltage 5 to 18 V Analog Sensor Accuracy Up to 5% Water Proof Sensor
Reference: RBD-2966
Introducing the latest addition to RoboticsBD's product lineup, the 1.2MPa Stainless Steel Pressure Transducer Sensor. Crafted with high-quality stainless steel, this pressure transducer offers exceptional rigidity and durability, making it ideal for a variety of applications.
Reference: RBD-2963
Introducing the latest addition to RoboticsBD's product lineup, the 3MPa Stainless Steel Pressure Transducer Sensor. Crafted with high-quality stainless steel, this pressure transducer offers exceptional rigidity and durability, making it ideal for a variety of applications.
Reference: RBD-2980
Working voltage range: DC 5 – 18V. Load capacity: ≤ 10 mA (DC 5V). Working temperature: ≤ 80 ℃ Lightweight, small size, easy to install. Inlaid with stainless steel impeller shaft, durable wearable. The seal ring with the upper and lower force structure never leaks. Non-violent shock, and chemical erosion.
Reference: RBD-2978
Flow Range:0.3 to 6L Input/Output Diameter: 6.5mm Minimum rated working voltage: DC 5~24V Max. working current: 15mA (DC 5V) Working voltage range: DC 5~24V Load capability: <= 10mA (DC 5V)
Reference: RBD-1847
Compact Design Country Specific pressure Multiple Displayable Unit Multi-colored, two-part display Alphanumeric display Discontinued by Manufactured 2017
Reference: RBD-1376
SensorModule : MPXV7002DP Measurement Range: 1psi, 100m/s (223mph/360kmh). Resolution: 0.84Pa. Data: Delivered at 14 bits from a 24 bit delta-sigma ADC. Low pass filtered Temperature compensated 10° to 60°C
Reference: RBD-0311
Working Voltage: 5 to 18V DC (min tested working voltage 4.5V). RoboticsBD Max current draw: 15mA @ 5V. Working Flow Rate: 1 to 30 Liters/Minute. Maximum water pressure: 2.0 MPa. Flow rate pulse characteristics: Frequency (Hz) = 7.5 * Flow rate (L/min). RoboticsBD
Reference: RBD-1848
Compact Design Country Specific pressure Multiple Displayable Unit Multi-colored, two-part display Alphanumeric display
Reference: RBD-1854
This module is compatible with various microcontroller control boards, such as arduino series microcontrollers. The module contains 2 kinds of interfaces. The module comes with a 20cm wire, which is long enough for your use. It has a short response time and quick response.
Reference: RBD-2984
Measures water flow rates from 1 to 30 liters per minute. Equipped with a magnetic hall-effect sensor for pulse output. High-quality sealing and durability, suitable for various water line applications. Simple and compact design for easy installation. Requires calibration for precise measurements.
Reference: RBD-0687
Operating Voltage: 1.71V to 3.6V – would typically be operated from 3.3V. Operating Temperature: -40 to +85 deg. Celsius (full accuracy between 0 and +65 deg. C). Peak current: 1.12mA. RoboticsBD Operating Pressure: 300 hPa to 1100 hPa. Accuracy between 700 to 900hPa and 25 to 40 deg. C: ±0.12hPa and ±1.0m.
Reference: RBD-0982
Model: HX710B Data Output Rate:10 SPS / 80SPS Max. Operating Current (mA):1.5 IC Package:16 Pin SOP
Reference: RBD-2968
Introducing the latest addition to RoboticsBD's product lineup, the 10MPa Stainless Steel Pressure Transducer Sensor. Crafted with high-quality stainless steel, this pressure transducer offers exceptional rigidity and durability, making it ideal for a variety of applications.
Reference: RBD-2987
Operating Voltage: 3.5-24VDC Operating Current: 15mA Insulation Resistance >100MOhm Nozzle Size: 1/8″
Reference: RBD-2964
Introducing the latest addition to RoboticsBD's product lineup, the 0.8MPa Stainless Steel Pressure Transducer Sensor. Crafted with high-quality stainless steel, this pressure transducer offers exceptional rigidity and durability, making it ideal for a variety of applications.
Reference: RBD-2983
Measures water flow from 1 to 120 liters per minute. Features a durable ABS and metal construction. Equipped with a hall-effect sensor for accurate pulse signal output. Suitable for use in water dispensers, coffee machines, and irrigation systems. Withstands water pressure up to 2.0 MPa.
Reference: RBD-2562
The kit includes one pair of transmitter and receiver modules for increasing the communication distance. And the frequency is 433MHz. It is very popular for remote control systems, such as wireless doorbell, remote control rolling gates, smart car, smart home, etc.
Reference: RBD-2056
Mounting form Polish rod probe The Probe material: Stainless steel Probe diameter: 4mm Length of the probe: 30mm Cabel material Silver plated copper (not insulated), PTFE Silver plated copper (Waterproof, insulated) Accuracy ±(0.3°C+0.5%|t|) Thermal response time: <0.5sSize: 4*30*500mmRange: -50C ~ 200C
Reference: RBD-2568
The Arduino UNO R4 WiFi merges the RA4M1 microprocessor from Renesas with the ESP32-S3 from Espressif, creating an all-in-one tool for makers with enhanced processing power and a diverse array of new peripherals. With its built-in Wi-Fi® and Bluetooth® capabilities, the UNO R4 WiFi enables makers to venture into boundless creative possibilities....
Reference: RBD-1037
Quad-band 850/900/1800/1900MHz Inner MT3337 GPS receiver, -165dBm precision, control on a same serial port. Earphone/ microphone outputs on a card or external 32-ohm speaker + supports voice calls with an electret microphone. Sending and receiving SMS.
Reference: RBD-0015
2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 25VDC. Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5%...
Reference: RBD-1552
Working Frequency: 868 MHz Distance: 8000m RF IC: SX1276
Reference: RBD-3089
Brand: Raspberry Pi Official
The Raspberry Pi AI Kit bundles an M.2-format Hailo 8L AI accelerator with the Raspberry Pi M.2 HAT+ to offer you access to excellent inferencing performance on the Raspberry Pi 5. The AI module is a 13 tera-operations per second (TOPS) neural network inference accelerator built around the Hailo-8L chip. The module uses the M.2 2242 form factor, and comes...
Reference: RBD-3090
Brand: DFRobot
The 10.525GHz microwave motion sensor applies the Doppler effect to detect moving objects using microwaves. This differs from the method used by a regular infrared (IR) sensor as microwave is sensitive to a variety of objects that are microwave-reflective, and its sensor readings are not affected by the ambient temperature.
This Gravity: liquid flow sensor is designed based on the electromagnetic principle. It adopts an O-ring rubber seal and uses silicone sealant at the outlet end to strength water-resistance. With high anti-interference and anti-impact, the sensor offers reliable performance and long service life. Also, it is designed with G1/4 thread connectors for easy installation.
