How to Place an Order
Store Pick Up
Request for Quotation/ International Sourcing
Order Status
Reference: RBD-1354
Length: 8 inches/20 CM (Long) Material: Copper Plated Pin Spacing: 2.54mm.
Reference: 0245
Choose your desire Resistor value from below:
Reference: 0031
3 Types Available (Please select from option) 1. Male to Male 2. Male to Female 3. Female-Female
Reference: RBD-0761
Breadboard friendly Mounting Style: Through Hole Mounting Direction: Vertical
Reference: RBD-0768
Size: 5mm Color: RED Head Shape: Round Lens Appearance: Transparent
Reference: RBD-0094
Arduino UNO in Bangladesh Micro-controller : ATmega328. Operating Voltage : 5V. Input Voltage (recommended) : 7-12V. Digital I/O Pins : 14 (of which 6 provide PWM output). Analog Input Pins : 6.
Reference: RBD-0755
Size: 5mm Color: Green Head Shape: Round Lens Appearance: Transparent
Store Pickup Available!
Free Ship Over 5000 BDT
Quality Product
No Warranty
No Replacement
This is JT308 125KHz USB Proximity Sensor Smart RFID ID Card Reader.
This RFID card reader can read RFID card serial number and output to your computer according to the specified format, then management software derives many more functions.
The JT308 series RFID card reader is simple, fast read card. Belong to standard HID devices do not need to install the driver, can be read in any number, this function is suitable for extended functionality in existing software, without any modification to the original software.
* Connect the USB cable with the card reader to the computer USB port.
* The reader will ‘drip’ sound and flash about that power successfully, and then half a second after the ‘drip’ sound and flash about that device self-test successfully, without Install any drivers, windows will automatically recognize it.
* Open one EXCEL or WORLD, the card number would be input by self.
| General Specification | |
| Frequency Range | 125KHz |
| Communication Speed | 106Kbit/s |
| Reading Distance | 5-8cm |
| Operating Temperature (°C) | -10 to 60 |
| Input Supply Voltage (VDC) | 5 |
| Material | Plastic |
| Reader Dimensions(mm)(LxWxH) | 105x70x12 |
| Cable Length (Meter) | 1.5 |
| Shipment Weight | 0.17 kg |
| Shipment Dimensions | 12 × 9 × 4.5 cm |
1 x USB interface RFID card reader.
1 x mini USB cable.
Reference: RBD-0313
Voltage: DC 3.3V (Do not use 5V supply) Operating Current :13-26mA Idle Current :10-13mA Operating Frequency: 13.56MHz Highly integrated analog circuitry to demodulate and decode responses Supports ISO/IEC 14443 A/MIFARE Typical operating distance in reading/Write mode up to 50 mm
Reference: RBD-0915
Maximum effective distance up to 150mm Less than 100ms decoding time Support external antenna Uart interface Support EM4100 compatible read-only or read/write tags Small outline design
Reference: RBD-1099
Contactless transmission of data and supply energy (no battery needed) Operating distance: Up to 1 to 5 cm (Depending on Antenna Geometry) Operating frequency: 125KHz Data transfer: 106 kbit/s Data integrity: 16 Bit CRC, parity, bit coding bit counting Anti-collision
Reference: RBD-0313
Voltage: DC 3.3V (Do not use 5V supply) Operating Current :13-26mA Idle Current :10-13mA Operating Frequency: 13.56MHz Highly integrated analog circuitry to demodulate and decode responses Supports ISO/IEC 14443 A/MIFARE Typical operating distance in reading/Write mode up to 50 mm
Reference: RBD-0346
Module Size: 42.7mm x 40.4mm x 4mm Easy to change mode: with a small SMD toggle Switch, it becomes very easy to change among IIC, SPI and HSU modes Longer distance: the reading distance becomes 5~7cm, compared with 4~6 cm of last version Built in PCB Antenna, with 5cm~7cm communication distance On-board level shifter, Standard 5V TTL for I2C and UART,...
Reference: RBD-1099
Contactless transmission of data and supply energy (no battery needed) Operating distance: Up to 1 to 5 cm (Depending on Antenna Geometry) Operating frequency: 125KHz Data transfer: 106 kbit/s Data integrity: 16 Bit CRC, parity, bit coding bit counting Anti-collision
Reference: RBD-0351
Contactless transmission of data and supply energy (no battery needed) Operating distance: Up to 100mm (depending on antenna geometry) Operating frequency: 13.56MHz Data transfer: 106 kbit/s Data integrity: 16 Bit CRC, parity, bit coding bit counting Anticollision Typical ticketing transaction: <100 ms ( including backup management)
Reference: 1817
RFID/ NFC Card Reader USB - 13.56Mhz R20C 13.56Mhz long-range USB Interface desktop RFID reader RFID Card / Chip Reader with USB Output - Connects to the PC as a keyboard. Drivers are installed automatically.Support MIFARE, protocol 14443A, S50, S70Power: USBFunctional distance: up to 8 cmFrequency: 13.56MHzLed indicator and buzzer
Reference: RBD-0915
Maximum effective distance up to 150mm Less than 100ms decoding time Support external antenna Uart interface Support EM4100 compatible read-only or read/write tags Small outline design
Reference: RBD-1402
The perfect solution for breaking out the pins from Lua V3 Nodemcu. Lead-out all the IO ports of the ESP-12E development board Lead out the pins of 5V and 3.3V power supply Convenient to connect with peripheral modules Onboard 5V / 1A DC-DC step-down converter circuit Onboard power indicator With DC power jack 6-24V.
Reference: RBD-0837
Capacity (mAh): 960-1500 Output Voltage: 3.7V High energy density High working voltage for single battery cells. Pollution-free Long cycle life ***It's a clone battery so the ampere couldn't be guaranteed.
Reference: RBD-0754
Plug Type: 5.5 x 2.1mm Pin: 3 Temperature: -30°C ~ +70°C. Rated load: up to DC 30V / 1.0A. Contact resistance: ≤0.03. Insulation resistance: ≥100 MΩ.
Reference: RBD-0314
Colour: Red, Green, Yellow, White, and Black, etc. Cable length: 40 cm. Net weight: 50 gm. They are very useful for connecting components to wires. It is insulation covered clips connected to the wire from both ends.
Reference: RBD-0305
LCD Type: TFT LCD Interface: SPI Touch Screen Type: Resistive Touch Screen Controller: XPT2046 Colors: 65536 Backlight: LED Resolution: 480*320 (Pixel) Dimensions: 84.91×56.54 (MM) Compatible with Raspberry Pi B, Raspberry Pi B+, Raspberry Pi 2 & Raspberry Pi 3
Reference: RBD-0825
Improved Locking Gold Plated Connectors tip Color: Red High-Quality built and Material Good resistance to Temperature & High Amp. Current
Reference: RBD-1674
Xtar MC1 charger Output current :500-50mA Universal Charger for : Charge for :10440/ 14500/ 14650/ 16340/ 17500/ 17670/ 18350/ 18500/ 18650/ 18700/ 22650/ 25500/ 26650 3.6/3.7V rechargeable Li-ion battery With package box
Reference: RBD-0346
Module Size: 42.7mm x 40.4mm x 4mm Easy to change mode: with a small SMD toggle Switch, it becomes very easy to change among IIC, SPI and HSU modes Longer distance: the reading distance becomes 5~7cm, compared with 4~6 cm of last version Built in PCB Antenna, with 5cm~7cm communication distance On-board level shifter, Standard 5V TTL for I2C and UART,...
