• How to Place an Order

  • bKash Payment Method

  • Request for Quotation/ International Sourcing

Arduino Uno R3

Arduino UNO in Bangladesh The Arduino Uno is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller.

Price BDT 399
More
In Stock

EM4100 125kHz RFID Card

It is proximity ID card of 125KHz, EM4100. It has been specially manufactured and packaged to be clean from dust. And you can print any pictures on the PVC blank cards. You can use it with our RDM6300 RFID reader module.

Price BDT 15
More
In-Stock
All best sellers
3S 11.1V 12.6V 25A W/Balance 18650 Li-ion Lithium Battery PCB Protection Board
  • 3S 11.1V 12.6V 25A W/Balance 18650 Li-ion Lithium Battery PCB Protection Board
  • 3S 11.1V 12.6V 25A W/Balance 18650 Li-ion Lithium Battery PCB Protection Board
  • 3S 11.1V 12.6V 25A W/Balance 18650 Li-ion Lithium Battery PCB Protection Board
  • 3S 11.1V 12.6V 25A W/Balance 18650 Li-ion Lithium Battery PCB Protection Board

3S 11.1V 12.6V 25A W/Balance 18650 Li-ion Lithium Battery PCB Protection Board

3S 11.1V 12.6V 25A W/Balance 18650 Li-ion Lithium Battery PCB Protection Board

Specification: 
Brand new
Size: about 56mm*45mm*1.2mm
Over voltage range: 4.25-4.35v±0.05v
Over discharge voltage range: 2.3-3.0v±0.05v
Maximum operating current: 0-25A
Maximum transient current: 34-40A
Quiescent current: less than 30uA

BDT 600
rating Read the review
Average rating: 5/5 - Number of reviews: 1
Quantity
In-Stock

  • Store Pickup Available! Store Pickup Available!
  • Shipping Available Shipping Available
Description

Specification: 
Brand new
Size: about 56mm*45mm*1.2mm
Over voltage range: 4.25-4.35v±0.05v
Over discharge voltage range: 2.3-3.0v±0.05v
Maximum operating current: 0-25A
Maximum transient current: 34-40A
Quiescent current: less than 30uA
Internal resistance: less than 100mΩ
Working temperature: -40---+50℃
Storage condition: -40-- +80℃
Effective life: more than30000h
Short circuit protection: Yes, delayed self recovery
Precautions:
Strictly according to the diagram wiring: 0V(B-)3.7V(B1)7.4V(B2)11.1V(B+), Do not deliberately short circuit.
After the line is connected, Need to charge first, then have output.
When the battery is connected in series with 3 groups, Please ensure that the voltage of each battery is the same. If not same, please fill in each set of batteries and then use.
Do not mix the good battery and the battery.
The capacity of the battery internal resistance is closer will be better.
Attention: Do not mix the good battery and poor battery to use. The internal resistance of 3 battery capacity are closer will be better. Please buyers know the professional knowledge of this module before buying
Package included:
1 x PCB Protection Board
Note:
Due to different producing batches, product details might be a little different. If you minding the difference, please buy it carefully.
Please allow 1-5mm differs due to manual measurement.
Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same

 
Product Details
21 Items

Click here to leave a review

Good service..
rating
15/04/2019
Sujan S.
Good service..
30 other products in the same category:

Breadboard Power Supply Module 3.3V 5V

Details For plug-in test boards, the 3.3V and 5V power supplies have jumper to adjust the desired power. Supports 9V battery jacks, 6.5 - 12V input power adapter, or power supply.Access via USB via Mini USB cable is small space wasted experiment board.  

Price BDT 150
More
In-Stock

Force Sensitive Resistor 0.5"

Description: This is a force sensitive resistor with a round, 0.5" diameter, sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance.

Price BDT 650
More
Pre-Order

AMG8833 IR Thermal Camera Breakout (Adafruit Compatible)

Add heat-vision to your project and with an AMG8833 Grid-EYE Breakout! This sensor from Panasonic is an 8x8 array of IR thermal sensors. When connected to your microcontroller (or raspberry Pi) it will return an array of 64 individual infrared temperature readings over I2C. It's like those fancy thermal cameras, but compact and simple enough for easy...

Price BDT 8,550
More
In-Stock

APM /Pixhawk Radio Telemetry Kit 433Mhz 100mW

Description: This Telemetry radio set allows you to link to  a flight controller such as the APM or Multiwii  AIO via a USB equipped device such as a  computer, laptop or tablet supporting a USB  connection (OTG). APM /Pixhawk Radio Telemetry Kit 433Mhz 100mW (OTG Cable Included)

Price BDT 3,999
More
Last items in stock

YF-S201 Hall Effect Water Flow Meter / Sensor

Features: Model: YF-S201 Sensor Type: Hall effect Working Voltage: 5 to 18V DC (min tested working voltage 4.5V) Max current draw: 15mA @ 5V Output Type: 5V TTL Working Flow Rate: 1 to 30 Liters/Minute Working Temperature range: -25 to +80℃ Working Humidity Range: 35%-80% RH Accuracy: ±10%

Price BDT 520
More
In-Stock

Waterproof DS18B20 Digital Thermal Probe or Sensor

This is a pre-wired and waterproofed version of the DS18B20 sensor. Handy for when you need to measure something far away, or in wet conditions. While the sensor is good up to 125°C the cable is jacketed in PVC so we suggest keeping it under 100°C. Because they are digital, you don't get any signal degradation even over long distances!

Price BDT 250
More
In-Stock

Digispark Kickstarter ATTINY85 Arduino General Micro USB Development Board

Digispark USB Development Board The Digispark is an Attiny85 based microcontroller development board similar to the Arduino line, only cheaper, smaller, and a bit less powerful. With a whole host of shields to extend its functionality and the ability to use the familiar Arduino IDE the Digispark is a great way to jump into electronics, or perfect for when...

Price BDT 150
More
In-Stock

BreadBoard

Solderless Large BreadboardA breadboard (or protoboard) is usually a construction base for prototyping of electronics. The term "breadboard" is commonly used to refer to a solderless breadboard (plugboard). Because the solderless breadboard for electronics does not require soldering, it is reusable. This makes it easy to use for creating temporary...

Price BDT 95
More
In-Stock

Leap Motion Controller

The Leap Motion Controller tracks both hands and all 10 fingers with pinpoint precision and incredible  speed. Setup is easy, just plug into your PC or Mac and launch Airspace, your home for Leap Motion apps. Play, create, and explore in a whole new way!In Airspace, the Leap Motion App store,

Price BDT 10,000
More
Pre-Order

Brand: SparkFun Electronics

Makey Makey Kit

Description: This is the same product as the Makey Makey Standard Kit. The difference is this version comes in fancy clamshell packaging meant for our distributors that need it. Regular customers are welcome to order, but we want to limit the amount of extra packaging finding its way into the trash heap.

Price BDT 5,500
More
Last items in stock

Brand: SparkFun Electronics

Beaglebone Black - Rev C

Description: The Beaglebone Black is a low-cost credit -card-sized development platform with good support from  a fast growing community. The Beaglebone Black differs  slightly from the regular version by providing you with an  onboard micro HDMI port, 512MB of DDR3L DRAM, 4GB  onboard flash memory, an AM3358 processor at 1GHz,  and making JTAG optional...

Price BDT 7,000
More
Last items in stock

Brand: SparkFun Electronics

LIDAR-Lite v3

Features: Range: 0-40m Laser Emitter Accuracy: +/- 2.5cm at distances greater than 1m Power: 4.75–5V DC; 6V Max Current Consumption: 105ma idle; 130ma continuous Rep Rate: 1–500Hz Laser Wave Length/Peak Power: 905nm/1.3 watts Beam Divergence: 4 m Radian x 2 m Radian Optical Aperture: 12.5mm Interface: I2C or PWM

Price BDT 19,500
More
Pre-Order

Weighing Sensor 24 Bit HX711 Dual-Channel

Weighing Sensor 24 Bit HX711 Dual-Channel Precision A/D Module Pressure Sensor. This module uses 24 high precision A/D converter chip HX711. It is a specially designed for the high precision electronic scale design, with two analog input channel, the internal integration of 128 times the programmable gain amplifier. 

Price BDT 600
More
In-Stock

HB100 Microwave Sensor 10.525GHz Doppler Radar Motion Detector Arduino 

Type: Microwave SensorChip: HB100Frequency: 10.525GHzVoltage: DC 5V±0.25VCurrent: 40mASize: 38 x 45 x 7 mm (L x W x H)Application: Automatic door startup, Car, House intrusion alarm, Collision warningTraffic monitoringNote:Please pay attention to the Voltage/Current/Power of your own devices.To ensure product safety, check whether this item is compliant...

Price BDT 1,200
More
Last items in stock

Mini Breadboard

Description: This black Mini Breadboard is a great way to prototype your small projects! With 170 tie points there’s just enough room to build and test simple circuits; They’re also great for breaking out DIP package ICs to jumper wires! If you run out of room, no worries, these mini breadboards can be snapped together to form larger stretches of board...

Price BDT 50
More
In-Stock

Brand: Waveshare

Raspberry Pi 3 Robot Shield Expansion Board Pioneer 600

What's on Board Raspberry Pi GPIO interface : for connecting Raspberry Pi USB TO UART : control the Pi through serial terminal AD/DA IO interface : screw terminal 1-WIRE interface : for connecting 1-WIRE devices like DS18B20 Sensor interface : for connecting various sensors 0.96inch OLED : SSD1306 driver, 128×64 resolution, SPI interface Buzzer

Price BDT 3,500
More
Last items in stock

Follow us on Facebook