Obstacle Avoiding Robot

Reference: 176

Brand: SparkFun Electronics

Rover 5 Robot Platform 4 Motors 4 Encoders

  Rover 5 Robot Platform 4 Motors 4 Encoders Description: If you’re looking for a base for your next robot, look no further than the Rover 5. The Rover 5 uses 4 independent motors, each with a hall-effect quadrature encoder and gearbox.

Reference: 1252

Makeblock mBot Ranger 3-in-1 educational robot kit

Makeblock mBot Ranger 3-in-1 educational robot kit for Age 10+

Reference: 374

RoboBrothers RoboPhilo Humanoid Robot Ready to Walk

• Available in kit form or ready to walk • 20 degree-of-freedom humanoid robot comes assembled and ready to use • Controlled by a real-time IR remote, built-in actions or user-programmed actions• Includes graphical software interface

Reference: 728

Hobbywing 3A UBEC 5V

Hobbywing 3A UBEC 5V 6V Switch-Mode BEC For RC Models

Reference: 268

Brand: RoboticsBD

3D Printed Robotics claw with servo motor

Description: Material: PLA (3D Printed)Claw max angle: 55mmLength: 108mmWidth: 98mm (streched)Color: Golden, Blue, Red Servo Motor: MG996R

Reference: 1312

Makeblock XY-Plotter Robot Kit V2

XY plotter robot kit is a drawing robot, which is a pen or another instrument can move to digital graphics on flat surfaces. It can also be due to the installation of a laser engraver upgrade packs into a laser engraving device converted.

Reference: 380

Eachine VR D2 40CH 5 Inches 800 x 480 Raceband 5.8G Diversity FPV Goggles with DVR Lens Adjustable

Eachine VR D2 40CH 5 Inches 800 x 480 Raceband 5.8G Diversity FPV Goggles with DVR Lens Adjustable

Reference: 375

Lynxmotion AL5D 4DOF Robotic Arm SSC-32U Combo Kit (FlowBotics Studio)

AL5D arm with SSC-32U USB board and powerful PC software Advanced inverse kinematics positioning control using mouse Includes license for full version of FlowBotics Studio Programming Software Wrist rotate sold separately (three options)  

Reference: 1112

DIY 6DOF Aluminum Robot Arm 6 Axis Rotating Mechanical Robot Arm Kit

Type 1: 6DOF Robot Arm Kit with 6 PCS Servos Type 2: Robot Arm Kit with Control board, Claw, 8 PCS Servos Name: 6DOF Robot Arm Kit Type: DIY robot Degree: 6 degrees of freedom Material: Stainless steel For: 8 years old and above Size: 270*105*215mm Note: Unassembled Delivery, which required you with patience and hands-on ability.           Assemble...

Reference: 1129

Otto DIY Build Your Own Robot Kit

Features Otto is Open-Source, Arduino-compatible, and 3d-printable two-legged. Using your computer's USB port, it can be easily programmed from any computer to walk, dance, sing, and avoid obstacles. This listing includes all the parts needed to build an Otto DIY robot. This is a Kit Version. You have to build it using our provided tutorial.

Reference: 372

BIOLOID Premium Robot Kit

• Comes with the CM-530 controller and AX-12A servos • Convenient, safe and expandable• All-round robot kit for education/robot competitions/entertainment• Can build various types of robot such as spider, dinosaur, and humanoid

Reference: 1301

Multi Chassis Tank Stair Climber

Multi Chassis Kit Come as Ready to Run with Electronics, Battery & Joystick Controller It is already assembled and you just have to charge the battery using the provided charger and this tank is ready to go! 1x MultiChassis Tank with Battery and Electronics 1x Charger 1x Joystick Controller The battery capacity is 2S 7.3V 1430mAh

Reference: 956

17DOF Biped Robot Educational Robot Kit 17 Degrees of Freedom Humanoid / Humanoids Walking Robot Kit

17DOF Biped Robot Educational Robot Kit 17 Degrees of Freedom Humanoid / Humanoids Walking Robot Kit

Reference: 1372

Underwater Thruster Brushless Motor 4 Blade Propeller Propulsion 30-200W

Features: - Powerful foot, high speed, corrosion-resistant   Product information: - Voltage: 12-24V - Current: 20A - Power: 30-200W - Motor KV: 1000KV - Size: Wire length 250mm ,Diameter 74mm ,Total length 75mm ,Propeller diameter 60mm - Metrial: Motor 304 Stainless steel bearing+Aluminum alloy ,Shell PLA ,Propeller PC Package Include: 1x CW Underwater...

Reference: 1256

Brand: SparkFun Electronics

Rover 5 Robot Platform 2 Motors 2 Encoders

Rover 5 Robot Platform 2 Motors 2 Encoders Description: If you’re looking for a base for your next robot, look no further than the Rover 5. The Rover 5 uses 2 independent motors, each with a hall-effect quadrature encoder and gearbox.

Reference: 1311

mDrawbot kit

mDrawBot is a 4-in-1 drawing robot kit, it can be assembled into 4 different drawing robots: mScara, mCar, mSpider and mEggBot.

Reference: 796

18 DOF Aluminium Metal Hexapod Robot Spider Six Foot/Feet Robotic Frame/Chassis Kit

18 DOF Aluminium Metal Hexapod Robot Spider Six Foot/Feet Robotic Frame/Chassis Kit

Reference: 578

Robotics Claw Mechanical Gripper Clamp Kit

This robotic claw arm is great for all your gripping needs. They are made from Aluminium and are pretty heavy-duty. The claw opens to about 2" and depending on the servo motor used, it can pick up some relatively heavy objects. Because the arms move parallel to each other, you get a better grip. The Robot Claw does not come with a servo motor. Compatible...

Reference: 1565

Robotic Arm Edge Kit

The Robotic Arm Edge Kit is a remote-controlled robotic arm kit with five degrees of freedom, a 3.5oz (100g) lifting capacity, and an LED light. Using five motors with gearboxes, the Edge has a 120° wrist motion, a 300° elbow motion, a 180° shoulder motion, a 270° base motion, and a 0-1.77" (0-4.5cm) gripping motion. This Robotic Arm Kit comes as...

Reference: 1241

Mecanum Wheel 80mm for Advanced Robotics

Name: Mecanum Wheel Weight: 120 g / 150 g (single) Inner diameter: 6.5mm Outer wheel diameter: 80mm/97mm Thickness: 37mm / 45mm Number of sub-wheels: 9 Bearing capacity: can bear 10kg /15kg(4 together)

Reference: 209

Boscam FPV 5.8Ghz 200mw 8 Channel AV Trx Rx

TS351 5.8G AV Transmitter RC305 5.8G AV Receiver

Reference: 326

Brand: DFRobot

4WD Smart Robot Chassis Kit

This 4WD Chassis is simple yet versatile robot chassis designed specifically for students and hobbyist. Featuring large size chassis plates cut from acrylic and designed with numerous holes and mounting points, providing plenty of space to carry a PCB board and any additional components that you choose. The possibilities are only limited by your...

Reference: 1163

Robotics Arm EEZYbotARM MK1

This is a 3DPrinted robotic arm.The design intent was to make something "easy" to make robotics armIt uses Mini servos for driving the kinematics linkage and you can use Arduino and a decent power supply (2A) to program and drive it.All the pieces are 3DPrinted in PLA. (Not assembled, Mount Kit only, Servo Include This is a mechanical kit only comes...

Reference: 1244

LOBOT LeArm 6DOF Metal Robotic Arm with Controller

http://www.lewansoul.com/product/detail-6.html# Included Controller and Arduino Nano The robotic arm is DIY kit, please refer to our 3D animation to assemble the mechanical arm by yourself. Please scan the QR code or access the link inside the package to get all the information. It’s not open resource, please ignore the label on the package.

Reference: 371

NAO V5 STANDARD EDITION

The result of a unique combination of mechanical engineering and software, NAO is a character made up of a multitude of sensors, motors and software piloted by a made- to -measure operating system: NAOqi OS. The pack includes: One NAO V5 (red or blue) 1 Charger and 1 battery 2 years of warranty 1 Choregraphe License Full SDK and API

Reference: 1253

Wall-e Programmable Robot

1. WULI bot is an educational robot for beginners to learn the knowledge of STEAM, and it has a variety of functions. Such as following functions, ultrasonic distance measurement, maze adventure, gesture control and so on. This robot is inspired from Wall-e Movie by Pixar Robot Control software downloadScratch software download: click hereRobot using...

Reference: 669

6 DOF Aluminium Mechanical Robotic Arm Clamp Claw Mount Robot Kit

6 DOF Aluminium Mechanical Robotic Arm Clamp Claw Mount Robot Kit

Reference: 692

4-20MA -50~150℃ RTD PT1000 SBW Temperature Sensor Transmitter Module

4-20MA -50~150℃ RTD PT1000 SBW Temperature Sensor Transmitter Module