How to Place an Order
Store Pick Up
Request for Quotation/ International Sourcing
Order Status
Reference: RBD-1354
Length: 8 inches/20 CM (Long) Material: Copper Plated Pin Spacing: 2.54mm.
Reference: RBD-0351
Contactless transmission of data and supply energy (no battery needed) Operating distance: Up to 100mm (depending on antenna geometry) RoboticsBD Operating frequency: 13.56MHz Data transfer: 106 kbit/s Data integrity: 16 Bit CRC, parity, bit coding bit counting Anticollision Typical ticketing transaction: <100 ms ( including backup management)...
Reference: 0245
Choose your desire Resistor value from below:
Reference: 0031
3 Types Available (Please select from option) 1. Male to Male 2. Male to Female 3. Female-Female
Reference: RBD-0768
Size: 5mm Color: RED Head Shape: Round Lens Appearance: Transparent
Reference: RBD-0761
Breadboard friendly Mounting Style: Through Hole Mounting Direction: Vertical
Reference: RBD-1360
PN junction rectifier diode. One direction flow of Current. Used for conversion of AC power to DC. 1N 4007 is electrically compatible with other rectifier diodes Used instead of any of the diode belonging to 1N400X series
The Hi-Link HLK-LD6001C is a state-of-the-art 60GHz millimeter wave radar sensor module designed for accurate, all-day entrance and exit detection. This module uses FMCW (Frequency Modulated Continuous Wave) radar technology to provide precise counting of personnel flow without privacy concerns. Unlike traditional sensors (visual, infrared, or laser), this radar module is unaffected by light conditions, ensuring reliable performance in all environments. Ideal for monitoring entrances and exits, the sensor is compact, efficient, and suitable for a variety of applications requiring accurate people counting and movement tracking.
Store Pickup Available!
Free Ship Over 5000 BDT
Quality Product
No Warranty
No Replacement
The Hi-Link HLK-LD6001C is a state-of-the-art 60GHz millimeter wave radar sensor module designed for accurate, all-day entrance and exit detection. This module uses FMCW (Frequency Modulated Continuous Wave) radar technology to provide precise counting of personnel flow without privacy concerns. Unlike traditional sensors (visual, infrared, or laser), this radar module is unaffected by light conditions, ensuring reliable performance in all environments. Ideal for monitoring entrances and exits, the sensor is compact, efficient, and suitable for a variety of applications requiring accurate people counting and movement tracking.
High-Precision Detection:
All-Day Monitoring:
Privacy Protection:
Wide Coverage Area:
Low Power Consumption:
Fast Processing Cycle:
Compact Design:
Versatile Communication:
Installation:
Connection:
Configuration:
Operation:
Smart Building Management:
Retail Analytics:
Security Systems:
Transportation Hubs:
Healthcare Facilities:
IoT and Smart Devices:
The Hi-Link HLK-LD6001C offers advanced millimeter wave radar technology for accurate, real-time personnel detection and counting. With its compact design and powerful features, it is ideal for smart buildings, retail analytics, and other applications requiring reliable and privacy-safe monitoring.
The latest price of Hi-Link HLK-LD6001C 60GHz Millimeter Wave Radar Passenger Flow Statistics Sensor Module in Bangladesh is BDT 8,950 You can buy the Hi-Link HLK-LD6001C 60GHz Millimeter Wave Radar Passenger Flow Statistics Sensor Module at best price from our RoboticsBD or visit RoboticsBD Office.
|
Please note that the product information provided on our website may not be entirely accurate as it is collected from various sources on the web. While we strive to provide the most up-to-date information possible, we cannot guarantee its accuracy. We recommend that you always read the product labels, warnings, and directions before using any product. |
|
Product Images are shown for illustrative purposes only and may differ from the actual product. |
Reference: RBD-2598
Brand: RoboticsBD
Precise Line Following: Navigate black lines on white surfaces with 8 high-resolution sensors. Easy Microcontroller Integration: Connect directly to your microcontroller with digital outputs. Fast and Responsive: Achieve accurate line following even at high speeds. Simple Calibration: Calibrate sensors quickly and easily with a large knob. Versatility:...
Reference: RBD-2086
Operating Voltage: 5V Contact Resistance : 50mΩ max (initial) Electrically Life:100,000 cycles Environment temperature: -25°C to +105°C Operating Force: 180/230(±20gf) Seal temperature:250ºC-280ºC I/O pins: 3 pins
Reference: RBD-1675
Model: PZEM-004T Operating Voltage: 80-260VAC Test Voltage: 80-260VAC Rated Current: 100A Rated power: 100A / 22000W Operating frequency: 45-65Hz Measurement accuracy: 1.0
Reference: RBD-2452
This Pulse Sensor is a heart rate sensor designed for Arduino microcontrollers. Development professionals use. The Pulse Sensor Kit brings you all the experience you need, a complete package. The kit includes: A 24inch 3p DuPont line, A soft Velcro Finger Strap, A sensor size sensor ear clip, 4 Velcro dots, and 9 transparent protective dot Pulse Sensor is...
Reference: RBD-1190
Temperature Coefficient Type: NTC Thermal Time Constant: 10s Resistance 10kΩ Tolerance: ±1% Maximum Power Rating: 75mW Maximum Operating Temperature: +150°C Minimum Operating Temperature: -80°C Dimensions(dia.): 2 mm Length: 30mm Application: Compensation, Control, Measurement, etc.
Reference: RBD-2445
Uses ultrasonic sound waves to detect obstacles and measure distance
Reference: RBD-3091
Brand: DFRobot
This is a water pressure sensor adopts DFRobot Gravity 3-pin interface. It supports standard 5V voltage input and 0.5~4.5V linear voltage output. It is compatible with multiple Arduino controllers.
Reference: RBD-2533
This sensor module has 8 IR LED/phototransistor pairs mounted on a 0.375" pitch, making it a great detector for a line-following robot. Pairs of LEDs are arranged in series to halve current consumption, and a MOSFET allows the LEDs to be turned off for additional sensing or power-savings options. Each sensor provides a separate analog voltage output.Note:...
Reference: RBD-0683
Operating voltage: DC3-5V Operating current: less than 20mA Sensor Type: Analog Detection Area: 40mmx16mm Operating temperature: 10℃-30℃ Humidity: 10% -90% non-condensing
Reference: RBD-0145
Dual output mode, analog output more accurate A fixed bolt hole for easy installation With power indicator (red) and digital switching output indicator (green) Having LM393 comparator chip, stable. Operating Voltage: 3.3V~5V
Reference: RBD-1914
Working voltage 3.3V-5 Output format: digital switching output (0 and 1)A fixed bolt holes for easy installation
Reference: RBD-3113
Rated Output:1.0 ± 0.1mV / V Non Linear Output:± 0.03% F.S Impedance (Ω):1115±10% Ω
Reference: RBD-0812
Based on MAX30105 – heart rate, oximeter, smoke sensor Green, red, and infra-red LEDs Interface: I2C (address 0x57) Compatible with 3.3V and 5V logic levels.
Reference: RBD-2087
Voltage 5V Photo interruption module triggers a signal when light is blocked between the opening of the sensor.
Reference: RBD-2082
Dimension: 2.5 x 1.5 x 1.5 cm. Receiving angle: 90 °. Working voltage: 2.7 ~ 5.5V. Frequency: 37.9KHz Receiving range: 18m. Weight: 4 gm.
Reference: RBD-0995
Diameter: 5mm No. of Pins: 2 Type of Mounting: PCB Through Hole Maximum Operating Temperature: +800°C (Approx.) Dark resistance:1-20 Mohm
Reference: RBD-0441
Power supply voltage: DC5 ± 2V Sensitivity: 0.5V / (0.1mg / m3) The minimum detection level of particles: 0.8 m Clean air voltage: 0.9V typ. Low consumption current (Icc: MAX. 20 mA) The presence of dust can be detected by the photometry of only one pulse Enable to distinguish smoke from house dust RoboticsBD
Reference: RBD-0272
Brand: Waveshare
Voltage level: 1.8V-6V Dimension: 38mm x 31.6mm Conversion level range: 1.8 V-6 V Instructions for use: (3.3 V, 5 V to each other) 4 pairs of power supply interfaces, supports more situation Use tantalum capacitors for power filter, provides more stability VCCB 5V power supply (can be an external 5V power supply)
Reference: RBD-2293
801S Vibration Sensor with gold alloy plated shock sensor for durability Provides both analog and TTL level digital signal outputs Adjustable sensitivity for micro shock detection and real-time vibration monitoring Onboard LM393 comparator IC for reliable performance Ideal for monitoring mechanical vibrations, displacement, and unbalance in systems
Reference: RBD-3115
Fast response characteristics Mounting holes to facilitate fixed installation The probe can plug design for easy testing. Signal light indicates the output Dual signal output (analog output, and TTL-level output) TTL output valid signal is low; (low output signal light, can be accessed by the microcontroller IO port)
Reference: RBD-2248
Model: LDT0-028K Solder tab connection Withstands high impact
Reference: RBD-2838
Windows Hello Facial Recognition: Enjoy secure and hands-free login using facial recognition. Enhanced Security: Eliminates the need for traditional passwords, reducing vulnerability to hacking. Lightning-Fast Login: Unlock your Windows 10/11 device in just 0.5 seconds. Universal Compatibility: Fits most laptops, tablets, and computers with adjustable...
Reference: RBD-0233
Brand: SparkFun Electronics
Description: This is the LSM9DS0, a versatile motion-sensing system-in-a-chip that houses a 3-axis accelerometer, 3-axis gyroscope, and 3-axis magnetometer. That’s right, 9 degrees of freedom (9dof) from a single IC!
Reference: RBD-2933
Brand: DFRobot
The RPLIDAR C1 is a new generation fusion-type DTOF (Direct Time of Flight) laser scanner from SLAMTEC. This advanced LIDAR system excels in high-definition detection of small and nearby objects, offering superior anti-interference and anti-adhesion capabilities. With a measurement radius of 12 meters, a sampling frequency of 5000 times per second, and...
Reference: RBD-2778
Input Voltage: (InVCC) DC 5 ~ 24 V Power Consumption: 5mA Output Current: 1 ~ 100mA Communication: RS485 Material: ABS Waterproof Performance: IP67
Reference: RBD-2889
IR transmitter Iduino emitting light with a wavelength of 940 nm. Works with voltage of 5 V. The kit includes a cable 3-pin.
Reference: RBD-2446
This is the updated 2021 version of the HC-SR04 Ultrasonic Sensor, offering enhanced features and improved flexibility. Notably, the input voltage now ranges from 2.8V to 5.5V, providing compatibility with a wider range of microcontrollers, including both 3.3V and 5V systems. Mode 1: GPIO (General Purpose Input/Output) Mode 2: I2C (New Feature) Mode 3:...
Reference: RBD-1177
This signal generator can use 4-20mA to generate voltage and control the current in the circuit. Accuracy up to 0.01; Liquid crystal display; Rotary encoder adjustment ; Two connection terminals are non polarity. Output range can be set; 4-20mA (device control) / -21mA (signal debugging) Display mode can be set, it is convenient for you to see the value...
Reference: RBD-0386
1 Hz output pin SQW. 32 KHz output pin 32K. RoboticsBD Voltage Supply: 2.2 V ~ 5.5 V (for RTC). Time Format: HH: MM: SS (12/24 hr). Date Format: YY-MM-DD-dd. DS 3231 based RTC with 2032 Battery Holder. RoboticsBD Battery is not included Note: Batteries not included.
Reference: RBD-0680
Acceleration, Gyroscope, and Magnetometer Power Supply: DC3.3V-5V Chip: MPU9250 Size: 22 mm x 17 mm. Gyro range : ± 250 500 1000 2000 ° / s Acceleration range: ± 2 ± 4 ± 8 ± 16g Magnetic field range: ± 4800uT 9 DOF modules. RoboticsBDChinese Variant MP92 QFN24 Package
Reference: RBD-1354
Length: 8 inches/20 CM (Long) Material: Copper Plated Pin Spacing: 2.54mm.
Reference: RBD-0351
Contactless transmission of data and supply energy (no battery needed) Operating distance: Up to 100mm (depending on antenna geometry) RoboticsBD Operating frequency: 13.56MHz Data transfer: 106 kbit/s Data integrity: 16 Bit CRC, parity, bit coding bit counting Anticollision Typical ticketing transaction: <100 ms ( including backup management)...
Reference: 0245
Choose your desire Resistor value from below:
Reference: 0031
3 Types Available (Please select from option) 1. Male to Male 2. Male to Female 3. Female-Female
Reference: RBD-0768
Size: 5mm Color: RED Head Shape: Round Lens Appearance: Transparent
Reference: RBD-0761
Breadboard friendly Mounting Style: Through Hole Mounting Direction: Vertical
The Hi-Link HLK-LD6001C is a state-of-the-art 60GHz millimeter wave radar sensor module designed for accurate, all-day entrance and exit detection. This module uses FMCW (Frequency Modulated Continuous Wave) radar technology to provide precise counting of personnel flow without privacy concerns. Unlike traditional sensors (visual, infrared, or laser), this radar module is unaffected by light conditions, ensuring reliable performance in all environments. Ideal for monitoring entrances and exits, the sensor is compact, efficient, and suitable for a variety of applications requiring accurate people counting and movement tracking.
