- Raspberry Pi
- Mini Computer/ PC
- 3D Printer
- Internet of things (IoT)
- Home Automation
- Learning Kit
- Arduino Shield & Module
- Robotics Parts
- Industrial Shield
- Industrial Component
- Motor Driver
- Communication Module
- Robot Platform Chassis
- 3D Printed
- Power Module & Adapter
- PLC Cable
- Tools & Accessories
- Thermal Printer
- Solar Panel
- Battery & Charger
- CNC & Laser Cutter
JT-500 600L/H Submersible Water Pump
- Pump motor DC brushless motor
- Works with Car Battery
- Works with 12V Battery
- Portable and convenient
- Pump motor shaft with high degree of wear-resistant ceramic shaft continuous service
- Life Circle 2000 hours.
- CE, RoHS Certified
- Input Voltage: DC 12V
- Max Water Head: 5m.
Store Pickup Available!
Free Ship Over 5000 BDT
JT-500 600L/H Submersible Water Pump is suitable for watering, pumping, drainage, water transportation from afar, water exchange in aquarium, etc.
This pump is not only suitable for tools such as slotting machine, cutting machine, rhinestone, etc.
Note: The pump does not have a power supply, the power supply needs to be equipped separately, the water pump is a DC water pump, the voltage is 24V, and it is used with a DC24V power supply.
- Voltage: DC 24V
- Flow rate: 600 L/H
- Head: 5 m
- Noise: 50db MAX
- Motor: Brush motor
- Weight: 150g
|Water temperature:||-20 degrees Celsius - 60 degrees Celsius|
|Type of fluid:||Tap water, ground water, sea water|
|Life Circle||2000 hours or more|
|No load current:||Less than 0.2A|
|Current at load:||1.2A|
|Size (mm):||106 x 33.5 x 38.5|
|Power cord length (m):||1|
|Shipment Weight||0.155 kg|
|Shipment Dimensions||10 × 10 × 6 cm|
Package Includes :
1 x JT-500 600L/H Submersible Water Pump
High-Quality Pump Operating Voltage: 24VDC Flow Rate: 1100GPH Outlet Diameter 19mm
Operating Voltage : 2.5 ~ 6V Operating Current : 130 ~ 220mA Flow Rate : 80 ~ 120 L/H Maximum Lift : 40 ~ 110 mm Outlet Outside Diameter: 7.5 mm Outlet Inside Diameter: 5 mm
Based on MAX30105 – heart rate, oximeter, smoke sensor Green, red, and infra-red LEDs Interface: I2C (address 0x57) Compatible with 3.3V and 5V logic levels.
Operating voltage: DC3-5V Operating current: less than 20mA Sensor Type: Analog Detection Area: 40mmx16mm Operating temperature: 10℃-30℃ Humidity: 10% -90% non-condensing
Working voltage: 5.00V DC Working current: 40mA (MAX) Response time: <500ms Insulation resistance: 100MΩ (Min) Analogue output: 0~4.5V; Digital output: high/low-level signal (the corresponding threshold can be selected by adjusting the potentiometer) Operating temperature: -20℃~90℃
Dual output mode, analog output more accurate A fixed bolt hole for easy installation With power indicator (red) and digital switching output indicator (green) Having LM393 comparator chip, stable. Operating Voltage: 3.3V~5V
Wide voltage operation: 3.3~5.5V 0~2.3V analog signal output, compatible with 5V, 3.3V two control systems The excitation source is an AC signal, effectively preventing probe polarization Waterproof probe for long-term immersion in water
ESP32 Bluetooth Wi-Fi development board, support NodeMCU / Arduino DHT11 temperature and humidity sensor CP2104 communication chip USB TO TTL Micro USB port Soil probe (long) soil temperature and humidity detection module 18650 Lithium Battery Holder Powered (Battery is not included)
Operating Voltage: 5VDC. Current: 30mA (MAX). Operating temperature: -30 ° C to 80 ° C. Compatible with Arduino, Raspberry Pi, AVR, PIC, etc. Measuring Range: 0 ~ 1000 NTU.
Soil NPK Sensor Agricultural Greenhouse Tester Environment Fertilizer Fertility Degree High-precision Intelligent Detector Soil Measurement range: 0-199 mg/KG Measurement accuracy: +-2%F.s Resolution: 1mg/KG (mg/L) Response time (T90, s): less than 10 Operating temperature: 5 to 45°C Working humidity: 5 to 95% (relative humidity), no condensation Baud...
Contact Rating: 10 W. Switching Voltage: 220 V. Switching Current: 0.5 A. Breakdown Voltage: 220 VDC. Carry Current: 1 A. Contact Resistance: 100 mΩ.
Operating voltage: 5V Provide both digital and analog output Adjustable sensitivity Output LED indicator Compatible with Arduino TTL Compatible Bolt holes for easy installation
Main color: Yellow Measure range: 0.00-14.00pH Resolution: 0.01pH Accuracy: ±0.05pH Calibration: two points automatic calibration