Reference: RBD-1740

Vibration Sensor Module Vibration Switch Alarm Module for Arduino

2 reviews

Operating voltage: 3.3 to 5VDC Ball Rolling type of tilt sensor. This small module is easy to use. A fixed bolt hole for easy installation Wide voltage LM393 comparator

Reference: RBD-0685

Infrared Obstacle Avoidance IR Sensor Module

96 reviews

Detection distance: 2 ~ 30cm Detection angle: 35 ° Comparator chip: LM393 3mm screw holes for easy mounting

Reference: RBD-1409

Arduino Compatible Red Laser Diode Module

3 reviews

Voltage: 3.0 V – 5 V. Driver: APC circuit. Line length: about 135 mm. Transmit power: 58mW. Operating Current: 40mA. Operating Current: 40mA. Operating temperature: -36◦C ~ 65◦C. ** We've received reports from some customers that they were unable to make the product work. To avoid any inconvenience, we suggest that you refrain from making a purchase...

Reference: RBD-1918

Miniature Vibrating Motor 6x15

1 review

Speed(RPM):19000 Motor diameter: 6mm Shaft diameter: 0.8mm Shaft length: 4mm Rated voltage: 1.5V-4.5V

Reference: RBD-0680

9 Degrees of Freedom Breakout- MPU9250

4 reviews

Acceleration, Gyroscope, and Magnetometer Power Supply: DC3.3V-5V Chip: MPU9250 Size: 22 mm x 17 mm. Gyro range : ± 250 500 1000 2000 ° / s Acceleration range: ± 2 ± 4 ± 8 ± 16g Magnetic field range: ± 4800uT 9 DOF modules. RoboticsBD

Reference: RBD-0700

GY- BMI160 6DOF Gravity Accelerometer Sensor

1 review

Operating Voltage: 3.3V-5.5V Low Power Consumption High Accuracy Small Size

Reference: RBD-1644

TOF10120 Laser Range Sensor Module Distance Sensor

1 review

940nm laser classified as class 1 under operation condition by IEC 60825-1:2014-3rd edition Small ceramic package(20×13.2×2.0mm) Long range absolute range measurement up to 1.8m within 5% accuracy at indoor

Reference: RBD-1932

DC Motor Mobile Phone Vibrator Vibration Motor Alarm Module – Black

1 review

Rated voltage: 5 VDC. Port: Digital quantity. Fixed hole:3mm. Pitch:15mm. Drive: MOS tube high-level trigger, low-level cutoff. Compatible with UNO R3/ Mega2560.

Reference: RBD-0687

BMP280 Pressure Sensor Module

10 reviews

Operating Voltage: 1.71V to 3.6V – would typically be operated from 3.3V. Operating Temperature: -40 to +85 deg. Celsius (full accuracy between 0 and +65 deg. C). Peak current: 1.12mA. RoboticsBD Operating Pressure: 300 hPa to 1100 hPa. Accuracy between 700 to 900hPa and 25 to 40 deg. C: ±0.12hPa and ±1.0m.

Reference: RBD-0797

U-Blox NEO-6M GPS Module

37 reviews

5Hz position update rate. The cold start time of 38 s and Hot start time of 1 s. Configurable from 4800 Baud to 115200 Baud rates. (default 9600). SuperSense ® Indoor GPS: -162 dBm tracking sensitivity. Support SBAS (WAAS, EGNOS, MSAS, GAGAN). Separated 18 x 18mm GPS antenna. RoboticsBD In recent years 2022, due to a shortage of chips, some of the GPS...

Reference: RBD-1645

GP2Y0E03 4-50CM Distance Sensor Module Infrared Ranging Sensor Module

Voltage operation: 2.7V-5V Measuring distance: 4 to 50 cm Output: Digital (I/C) / Analog Output Sensor: Infrared LED and CMOS image sensor

Reference: RBD-2078

Vibration Switch Module

No direction, any angle can trigger the work. Sensitivity switches can be selected for the trigger sensitivity according to circuit requirements. This switch is suitable for the trigger of the small current circuit. Component Type: SW-18015P Maximum voltage: 12V Rated Heating Current: 20mA

Reference: RBD-0812

High Accuracy I2C MAX30105 Particle Optical Sensor Photodetectors Oximeter Module

1 review

Based on MAX30105 – heart rate, oximeter, smoke sensor Green, red, and infra-red LEDs Interface: I2C (address 0x57) Compatible with 3.3V and 5V logic levels.

Reference: RBD-2088

Tilt Switch Sensor Module For Arduino

1 review

Operating Voltage: 5v DC. This module is Small and Simple to use. Digital switch output (0 & 1) High sensitivity Completes the circuit when the module is tilted LED lights up when tilt switch is activated

Reference: RBD-2543

LPB40B IP65 DToF Single-Point Ranging LiDAR Sensor (0.05-40m, UART)

The LPB40B Single-Point Ranging LiDAR based on the DToF principle. The DToF technology enables the laser radar to work stably under strong outdoor lighting, further improving the stability and accuracy of distance measurement. It is capable of withstanding up to 100klux of ambient light, with a range of up to 40m indoors and outdoors. The overall accuracy...

Reference: RBD-0742

Motor Driver 43A BTS7960

9 reviews

Input voltage(V): 6 – 27. Maximum current(A): 43. Input level(V): 3.3 – 5. Duty cycle: 0 – 100%. Path resistance: 16 mΩ at 25°C. Low quiescent current: 7 µA at 25°C.

Reference: RBD-2089

Mercury Medallion Module

Consists of a mercury switch 680Ω resistor LED that will light up when tilt is detected. 

Reference: RBD-2933

Brand: DFRobot

RPLiDAR C1 - DTOF LiDAR 360° Laser Range Scanner (12m, IP54)

The RPLIDAR C1 is a new generation fusion-type DTOF (Direct Time of Flight) laser scanner from SLAMTEC. This advanced LIDAR system excels in high-definition detection of small and nearby objects, offering superior anti-interference and anti-adhesion capabilities. With a measurement radius of 12 meters, a sampling frequency of 5000 times per second, and...

Reference: RBD-0743

S550 Hexcopter Frame 550mm (Black)

Wheelbase: 550mm Weight: 550g/720g(without/with gimbal) Adopts S800 upward tilt arm design – Plastic injection moduling Ensures hardness and lighter weight – Brushless gimbal compatible for FPV It comes with PCB center board of soldered The arm equips support ridges for better and faster forward flight. Features pre-threaded brass sleeves.

Reference: RBD-0822

Hall Effect Sensor Switch Magnetic Detector Module For Arduino

7 reviews

S49E hall sensor Features wide-range voltage comparator LM393 Signal output indicator Analog / Digital output

Reference: RBD-2090

Magic Cup Tilt Switch Module

Operates on 5V DC supply. Mercury switch

Reference: RBD-1062

AMG8833 IR Infrared 8*8 Thermal Imager Array Temperature Sensor

Temperature detection of the two-dimensional area: 8 × 8 (64 pixels). Digital output (capability of temperature value output). Compact SMD package (adaptively to reflow mounting). RoHS compliant.

Reference: RBD-2206

Analog Piezoelectric Ceramic Vibration Module

Analog piezoelectric ceramic vibration module Measures the extent of vibration Proportional to the strength of shock or vibration Interface type: Analog Output Dimensions: 30 (L) x 23 (W) x 17 (H) Weight: 5g

Reference: RBD-1066

Mini Metal Detector Module

6 reviews

Operating voltage: 5V DC. Detector distance: 1CM. Adjust the potentiometer, let the modules work normally. Small and easy to use module. It comes with a Buzzer for metal detection indication.The Mini Metal Detector Module arrives disassembled, requiring assembly using a soldering iron and soldering accessories. Moderate knowledge of soldering and...

Reference: RBD-2229

Piezoelectric Vibration Sensor Module with Analog & Digital Output

Highly sensitive and reliable Piezoelectric Vibration Sensor Module Detects vibration and measures acceleration Analog and digital outputs Suitable for industrial control systems, robotics, automotive, and consumer electronics

Reference: RBD-1192

Hall Effect Sensor 6851/A3144

5 reviews

Digital Output Hall-effect sensor. Operating voltage: typically 5V. Output Current: 25mA. It can be used to detect both the poles of a magnet.

Reference: RBD-1202

Compass Sensor QMC5883L / HMC5883L GY271

8 reviews

3-axis magnetic electronic compass. Precise heading information. Operating Voltage: 3 -5 V DC. Driver Chip: HMC5883L / QMC5883L Communication: I2C protocol. Measuring range: ± 1.3-8 Gauss.Library: https://github.com/keepworking/Mecha_QMC5883Lhttps://www.arduino.cc/reference/en/libraries/qmc5883lcompass/

Reference: RBD-2235

27mm Piezo Ceramic Elements Sound Sensor

1 review

Sound pressure level: 85DB 10cm The input voltage: 30vp-p max Operating Temperature: -20~70 Clear sound Ultra-thin and lightweight Low power consumption for voltage type

Reference: RBD-1194

Reflective Photo Sensor (RPR-220)

6 reviews

Product Name : Optical Sensor Switch Model : RPR220 Color : Black Net Weigh : 3g Material : Plastic, Metal Detection Distance：1-13mm Working Voltage:DC 30V(Max) Output Type:Photo Transistor

Reference: RBD-1722

NEO-M8N GPS Module with Ceramic Active Antenna

1 review

Antenna Size : approx. 26 x 26 x 9 (LxWxH) mm. Module Size : approx. 26 x 36 x 4 (LxWxH) mm. Net weight : approx. 16 gm. Gross weight : approx. 17 gm. Mounting : approx. 3 mm. The default baud rate : 9600.

Reference: RBD-2236

20mm Piezo Ceramic Elements Sound Sensor

Plate Diameter: 20mm Element Diameter: 14mm Plate Thickness: .42mm Lead Length: ~50mm Plate Material: Brass Resonant Frequency (kHz): 6.3 +/- .6kHz

Reference: RBD-1199

Hall Effect Sensor A1302 49E

5 reviews

Low-noise output Fast power-on time Ratiometric rail-to-rail output 4.5 to 6.0 V operation Solid-state reliability Factory-programmed at end-of-line for optimumperformance Robust ESD performance