How to Place an Order
bKash Payment Method
Nagad Payment Method
Request for Quotation/ International Sourcing
Order Status
Heat Shrink Tubing 2:1, Eventronic Electrical Wire Cable Wrap Assortment Electric Insulation Heat Shrink Tube Kit (1 pcs) Please Choose Size Below
Arduino UNO in Bangladesh The Arduino Uno is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller.
It is proximity ID card of 125KHz, EM4100. It has been specially manufactured and packaged to be clean from dust. And you can print any pictures on the PVC blank cards. You can use it with our RDM6300 RFID reader module.
There are 35 products.
Brand: Waveshare
5 inch Resistive Touch Screen LCD, HDMI interface, Designed for Raspberry Pi Installation Instruction: http://www.waveshare.com/wiki/5inch_HDMI_LCD Raspbian Image for 5 inch HDMI Diplay with Touch : Raspbian 5 inch HDMI with Touch Download Link
LCD keypad shield for Arduino operates at 5V Includes a 2x16 LCD display and 6 momentary push buttons Use digital pins 4, 5, 6, 7, 8, 9, 10, and analog pin 0 to interface with the LCD Do not use Pin 10 while this shield is connected LCD color may vary (green or blue)
Brand: Waveshare
5inch HDMI LCD with TouchScreen (B) + Bicolor Case Installation Method & Driver System Support: Raspberry Pi / Windows / Support any HDMI System with Touch The LCD 800×480 high resolution Resistive touch control Supports Raspberry Pi Supports Banana Pi / Banana Pro, comes with Lubuntu, Raspbian images Supports BB Black, comes with Angstrom image
Brand: Waveshare
3.5inch Resistive Touch Display (B) for Raspberry Pi, 480×320, IPS Screen, SPI
Brand: SparkFun Electronics
Description: This is a framed graphical LCD 64x128 with LED backlight. This unit is a very clear STN type LCD with a simple command interface. This new module includes the negative voltage circuitry on board!
Brand: SparkFun Electronics
Description: This is a 7" LVDS LCD Cape for the pcDuino V3 with a 1024x600 screen resolution and capacitive touch from LinkSprite. This massive screen is a great addition for the pcDuino V3 that compliments its extreme versatility as a mini PC development platform.
As the pin resources of Arduino controller is limited, your project may be not able to use normal LCD shield after connected with a certain quantity of sensors or SD card. However, with this I2C interface LCD module, you will be able to realize data display via only 2 wires. If you already has I2C devices in your project, this LCD module actually cost no...
320×480 resolution Resistive touch control Supports any revision of Raspberry Pi (directly-pluggable) Compatible with Raspberry Pi A, B, A+, B+, 2B, 3B, 3B+,4B versions Drivers provided (works with your own Raspbian/Ubuntu directly) Size perfectly fits the Pi High quality immersion gold surface plating Supports Raspbian system, ubuntu system ,kali Linux...
Size: 0.96 Resolution: 128X64 Color: Blue, Yellow Viewing angle: greater than 160 degrees Low power consumption: 0.04W during normal operation Support wide voltage: 3.3V-5V DC Working temperature: -30-80 degrees Volume: 27MM * 27MM * 4.1MM Driver IC: SSD1306 Communication: IIC, only two I / O ports Backlight: OLED self light, no backlight
Specification:1. "LIGHT" linked with GND, the backlight to be lit.2. Need you to compress the screen and PCB tighter, might got loose after the delivery. 3. Use a 3.3V controller, otherwise the display could be quite vague.
BLUE COLORThis little 8-character, 2-line parallel liquid crystal display is a generic equivalent of the Optrex DMC-50448N-AAE-AD LCD. It is incorporated into our Orangutan SV-328 robot controllers, some versions of our A-Star 32U4 Prime microcontroller boards,
1.8-inch color screen,support 65K color display,display rich colors 128X160 resolution, clear display Using the SPI serial bus, it only takes a few IOs to illuminate the display With SD card slot for convenient function expansion Provide underlying libraries and rich sample programs for Arduino, C51, and STM32 platforms Military-grade process standards,...
4 Bits 0.36Inch Clock RED Anode Digital Tube Four Serial Driver Board Control Interface: A total of four pins (GND, VCC, DIO, CLK), GND to ground, VCC is the power supply, DIO of data input and output pin, CLK is the clock signal pin;
Feature:Resolution: 128*64Control chip: SSH1106Display area: 29.42 x 14.7mmDriving voltage: 3.3-5VOperating temperature: -40 ℃ to 70 ℃Interface type: IIC/I2C interfacePin definitions:1> GND (power ground)2> VCC (positive power supply)3> SCL (clock line)4> SDA (data line)
Digit height: 0.56 inch Dimensions: 50.3 x 19.0 x 8.0 mm Digit quantity: 4 Digit Available Emitting color: Red/Yellow Green/Yellow/Amber/Blue/White/Pure Green Surface color: Black/Gray (white epoxy) Epoxy colors: Red Polarity: Common Anode/Common Cathode
These 10 segment bar graph LEDs have many uses. With a compact footprint, simple hookup, they are easy for prototyping or finished products. Essentially, they are 10 individual blue LEDs housed together, each with an individual anode and cathode connection. We also carry these in red, and green. Note: The pinout on these bar graphs may vary from what is...
This LCD comes with male header already soldered. So you don't have to worry about soldering it. You can straight connect it with the breadboard.
Nextion is a seamless Human Machine Interface (HMI) solution that provides a control and visualization interface between a human and a process, machine, application or appliance. Nextion is mainly applied to Internet of thing (IoT) or consumer electronics field.
Nextion is a seamless Human Machine Interface (HMI) solution that provides a control and visualization interface between a human and a process, machine, application or appliance. Nextion is mainly applied to Internet of thing (IoT) or consumer electronics field.
Product Description Supports development boards such as Arduino UNO and Mega2560 for plug-in use without wiring 480X320 resolution, clear display, support for touch function Support 16-bit RGB 65K color display, display rich colors 8-bit parallel bus, faster than serial SPI refresh On-board 5V/3.3V level shifting IC, compatible with 5V/3.3V operating...
7-inch TFT color monitor VGA HDMI 1024*600 for Raspberry Pi TFT IPS LCD with 1024 X 600 resolution This is a 7-inch IPS LCD screen with a resolution of 1024 X 600 and can be used as a monitor for Raspberry Pi 3 and Raspberry Pi 4. It works with Raspberry pi easily does not require any additional modification of raspbian boot Image.
Digit height: 0.56 inch Dimensions: 50.3 x 19.0 x 8.0 mm Digit quantity: 3 Digit Available Emitting color: Red/Yellow Green/Yellow/Amber/Blue/White/Pure Green Surface color: Black/Gray (white epoxy) Epoxy colors: Red Polarity: Common Anode/Common Cathode
MAX7219 Dot Matrix Module Microcontroller 4 In One Display with 5P Line
Description Pins : 10Forward Voltage : 2.2VPolarity : Common AnodeDimensions : 12.5 x 19mmHeight : 8mm without pins, 14mm with pinsWeight : 2.1g
Size: 0.96 Resolution: 128X64 Color: White Viewing angle: greater than 160 degrees Low power consumption: 0.04W during normal operation Support wide voltage: 3.3V-5V DC Working temperature: -30-80 degrees Volume: 27MM * 27MM * 4.1MM Driver IC: SSD1306 Communication: IIC, only two I / O ports Backlight: OLED self light, no backlight
This is I2C adapter for Graphic LCD 128x64, very suitable for interactive work with Arduino, Raspberry. In this adapter used driver MCP23017. For instruction and libraries you can find information here: www.gammon.com.au/forum/?id=10940 For change I2C adress you can folow infromation on bottom side of board. Control of backlight: Normal backlight use...
This is a framed type LCD graphical 128x64 with LED backlight.ST7920 controller type LCD with a simple command interface. (5V)
