Sensors

Ultrasonic sensor HC - SR04

1 review

PIR Motion Sensor

4 reviews

DC 3v-6v to 400kV 400000V Boost Step-up Power Module High-voltage Generator

1 review

DC 3v-6v to 400kV 400000V Boost Step-up Power Module High-voltage Generator Input voltage: DC 3 V to 6 VInput current: 2 A - 5 AHigh-pressure type: the type of pulse currentOutput voltage: 400000 v(Please pay attention to safety)High-pressure discharge distance between 10 mm - 20 mmThe output high voltage wire length: 100 mm

AC 0~5A Analog Current Meter Module Ammeter Sensor Board for Arduino

AC 0~5A Analog Current Meter Module Ammeter Sensor Board for Arduino This electricity sensor is based on TA12-100 current transformer, which can transform AC signals of large current into small amplitude signals. The maximum current that can be detected can reach 5A, and the present current signal can be read via analog I / O port.

Vibration Motor

Description: A vibration motor! This itty-bitty, shaftless vibratory motor is perfect for non-audible indicators. Use in any number of applications to indicate to the wearer when a status has changed.  Documents: Datasheet

A6 Pro Serial GPRS GSM Module Core Developemnt Board

4 reviews

A6 Pro Serial GPRS GSM Module Core Developemnt Board This is professional version serial GSM / GPRS core development board based on GPRS A6 module. It supports dual-band GSM/GPRS network, available for GPRS and SMS message data remote transmission. Suitable for SIM800L GSM modules / Arduino SIM900 GPRS Shield

Smart Speed Detecting Sensor for Arduino

Reference: SEN-09403

Carbon Monoxide Sensor - MQ-7

Description: This is a simple-to-use Carbon Monoxide (CO)sensor, suitable for sensing CO concentrations in the air. The MQ-7 can detect CO-gas concentrations anywhere from 20 to 2000ppm.

Capacitive Soil Moisture Sensor

Capacitive Soil Moisture Sensor Module Detection Sensor Analog Output DIY Electronic for Arduino and Raspberry Pi

Hall Effect Sensor Switch Magnetic Detector Module For Arduino

Hall Effect switch is a high sensitivity hall-effect switch designed for high temperature operation - up to 150°C. The uni-polar switching characteristic makes these devices ideal for use with a simple bar or rod magnet.

Digital Barometric Pressure Sensor Module 0-40kPa

6DOF MPU 6050 3 Axis Gyro

4 reviews

JST SH Jumper 4 Wire Assembly - 8"

Description: This is a simple four wire cable. Great for jumping from board to board or just about anything else. These cables mate with the connectors listed below. They have bare wires on one end and a 4-pin JST SH connector on the other end with a mating socket. Compatible With:  Fingerprint Scanner - TTL (GT-511C3) & Fingerprint Scanner - 5V TTL...

AMG8833 IR 8*8 Thermal Imager Array Temperature Sensor

The AMG8833 is the next generation of 8x8 thermal IR sensors from Panasonic and offers higher performance than it's predecessor the AMG8831. The sensor only supports I2C, and has a configurable interrupt pin that can fire when any individual pixel goes above or below a threshold that you set. 4To make it easy to use, we pick & placed it on a breakout...

Reference: Venus GPS Sparkfun

Brand: SparkFun Electronics

Venus GPS with SMA Connector

Features: Up to 20Hz update rate -148dBm cold start sensitivity -165dBm tracking sensitivity 29 second cold start TTFF 3.5 second TTFF with AGPS 1 second hot start 2.5m accuracy Multipath detection and suppression Jamming detection and mitigation SBAS (WAAS / EGNOS) support 67mW full power navigation Works directly with active or passive antenna

TCRT5000L Reflective Optical Sensor

The TCRT5000 and TCRT5000L are reflective sensors which include an infrared emitter and phototransistor in a leaded package which blocks visible light. The package includes two mounting clips. TCRT5000L is the long lead version.

Motor Driver 43A BTS7960

Fingerprint Scanner - 5V TTL (GT-511C1)

1 review

Description: Fingerprint scanners are awesome. Why use a key when you have one right at the tip of your finger? Unfortunately, they're usually unreliable or difficult to implement. Well not anymore! We've found this great fingerprint module from ADH-Tech that communicates over TTL Serial so you can easily embed it into your next project.

YL-69 Soil Hygrometer Humidity & Soil Moisture Detection Sensor For Arduino

S550 Hexcopter Frame 550mm (Black)

HR202 Humidity Detection Sensor Module

Flame Sensor fire detection module for Arduino

3 reviews

5mW Adjustable Laser Dot Diode Module

5mW Adjustable Laser Dot Diode Module Features: 1. Output Power: 2-5mW2. Wavelength: 650nm3. Working Voltage: 3v - 5v4 .Laser Shape: Dot5. Working temperature: -10 C-40 C

Angle Sensor Module for Arduino SW-520D

Angle Sensor Module for Arduino High-sensitivity angle sensor SW-520D Comparator output, clean signal, great waveform, strong driving ability, more than 15mA Distribution positioner sensitivity adjustment Working voltage: 3.3V~12V Output form: Digital switching output (0 and 1) With fixed bolt hole for easy installation

SW-420 NC Type Vibration Sensor Module Arduino

TCS230 TCS3200 Color Sensor Recognition Module

Piezo Element

2 reviews

Brand: SparkFun Electronics

SparkFun 9 Degrees of Freedom IMU Breakout - LSM9DS0

Description: This is the LSM9DS0, a versatile motion-sensing  system-in-a-chip that houses a 3-axis accelerometer, 3-axis  gyroscope, and 3-axis magnetometer. That’s right, 9 degrees  of freedom (9dof) from a single IC!

LM35 Temperature Sensor

1 review

Description The LM35 series are precision integrated-circuit temperature sensors, with an output voltagelinearly proportional to the Centigrade temperature. Thus the LM35 has an advantage over linear temperature sensors calibrated in ° Kelvin, as the  user is not required to subtract a large constant voltage from  the output to obtain convenient...

Brand: SparkFun Electronics

SparkFun ToF Range Finder Sensor - VL6180

Description: This is the SparkFun “Time-of-Flight”  Range Finder, a sensor board for the VL6180  distance sensor. Unlike most distance sensors  that rely on reflected light intensity or reflected  angles to determine range, the VL6180 uses a  precise clock to measure the time it takes light  to bounce back from a surface.