Reference: RBD-1383

Smart Sensor AR320 Infrared Thermometer

1 review

Laser Pointer for Accurate Temperature Reading | Auto Data Hold Temperature Measurement Range: -32℃ ~ 320℃ (-26℉ ~ 608℉) Accuracy: ±2℃ / ±2% | Resolution: 0.1℃ or 0.1℉ Response Time & Wavelength: 500ms & (8-14)um | Distance Spot Ratio 12:1 Automatic Data Hold | Auto Shut Off | Rubberized Handle for Grip and Low Impact Resistance

Reference: RBD-2395

Mini HLK-LD2450 24G Smart Home Motion Target Tracking Radar Sensor Module Kit

mmWave human presence sensor. It uses motion target tracking and can detect up to 3 people. 

Reference: RBD-1670

ESP8285 IR Infrared Transmitter Receiver Module WIFI Remote Control Switch

The smallest 802.11b/g/n Wi-Fi SoC module Uses low power 32bit CPU and compatible with the application processor Main frequency up to 160MHz Built-in 10Bit high precision ADC Support UART/GPIO/PWM/ADC interface Integrate Wi-Fi MAC/BB/RF/PA/LNA

Reference: RBD-2657

PIR Infrared Motion Sensor Auto Electric Switch

Compact and lightweight design for easy installation and operation, offering a plug-and-play experience. Automatically activates when detecting human body temperature within the sensing area in low-light environments, enabling automated control of connected lamps (with a 45-second time delay). Caution: Avoid using multiple lights in series or parallel and...

Reference: RBD-1727

IR Infrared Transmitter Module

1 review

This is 38KHz Infrared IR transmitter sensor module For Arduino Transmit 38KHz modulating signal Suitable for Arduino DIY project Material: PCB

Reference: RBD-2743

LIS3DSH High Resolution Three Axis Triaxial Accelerometer Module

Wide supply voltage 1.71 V to 3.6 V Independent IO power (1.8V) and power supply voltage compatible Ultra-low power consumption of ± 2g / ± 4G / ± 6g / ± 8G / ± 16g IIC  / SPI digital output interface 16-bit data output Programmable Embedded State Machine Embedded temperature sensor Embedded self-test Embedded FIFO 10,000 g high impact resistance

Reference: RBD-1728

IR Digital 38khz Infrared Receiver Sensor Module

IR Digital 38khz Infrared Receiver Sensor Module

Reference: RBD-2745

LSM9DS1 9DOF Accel/Mag/Gyro/Temp Sensor Module

The LSM9DS1 is a versatile, motion-sensing system-in-a-chip. It houses a 3-axis accelerometer, 3-axis gyroscope, and 3-axis magnetometer – nine degrees of freedom (9DOF) in a single IC! The LSM9DS1 is equipped with a digital interface, but even that is flexible: it supports both I2C and SPI, so you’ll be hard-pressed to find a microcontroller it doesn’t...

Reference: RBD-1859

Photoelectric Sensor CDD-11N Diffuse NPN Infrared Metal Body NO+NC

CDD-11N NPN Output Photoelectric sensor  Epoxy filled housing ensures resistance to vibration Rigid Nickel Plated Brass housing This is NPN Output CDD-11N. For PNP Output CDD-11P please check here

Reference: RBD-2762

GY-362 ADXL362 Triaxial Accelerometer Sensor Module

The GY-362 ADXL362 Sensor Module is a high-precision accelerometer module designed for a wide range of motion sensing applications. Powered by Analog Devices' ADXL362, this module offers ultra-low power consumption, exceptional accuracy, and versatile functionality.

Reference: RBD-2095

Infrared Obstacle Avoidance Sensor Module

2 reviews

Detection distance: 2-40cm IO Interface: 4-wire interfaces (- / + / S / EN) Output signal: TTL level Adjustment: adjust multi-turn resistance Effective angle: 35 ° **Please be advised that the majority of our customers have left negative reviews for this product. We recommend that you do not make a purchase unless you are absolutely certain that you can...

Reference: RBD-2783

LSM303DLH 3-Axis Electronic Compass Accelerometer Module

The GY-51 LSM303DLH chip has an accelerometer, magnetometer, A / D converters and signal conditioning circuit integrated. Still, the communication to the processor is done through the I2C bus. Thus only one chip is required to achieve a six-axis data detection and output. The LSM303DLH requires very little peripheral devices.

Reference: RBD-2096

Eye Blink Detection Digital Sensor with Goggles

Operating Voltage: 3-5.5V Supply Current: ≥ 20mA Optimal Sensing Distance: 3mm Working voltage of 5V, the output of the black line low, white line of high output Uses Infrared Light to Detect Anti-Interference Ability Sensors to adopt TCRT5000 High Sensitivity, Stable Performance Exquisite workmanship, with the indicator Has a fixed bolt hole for easy...

Reference: RBD-2790

Hall-Effect Sensor - US1881 (Latching)

The US1881 is an integrated Hall-Effect latched sensor. That's nice but what does it do? Holding a magnet near the sensor will cause the output pin to toggle. This makes for a robust presence sensor. A reed sensor also works nicely, but can be limited by the glass encapsulation and size. A Hall-Effect sensor is much smaller, but can handle less current...

Reference: RBD-2103

IR Remote Control without Battery

4 reviews

Remote control distance: more than 8 meters Crystal: the oscillation frequency of 455 IR carrier frequency: 38KHz Output form: Digital Power Supply: CR2032 Battery Pointing Angle: up to 60º Button: free height is less than 3mm, the force 200-350g, the life of more than 200 000 click

Reference: RBD-2792

Tilt Sensor AT407

This AT407 basic tilt switch can easily be used to detect orientation. Inside the can is a ball that make contact with the pins when the case is upright. Tilt the case over and the balls don't touch, thus not making a connection. There are numerous uses for these basic sensors, but keep in mind you might need to use some debouncing code, as the sensor...

Reference: RBD-2125

QRE1113 Reflective Optical Sensor

1 review

Phototransistor output  No contact surface sensing  Miniature package

Reference: RBD-2210

Photoelectric Switch DC6-36V E3F-DS30C4 NPN NO Proximity Sensor Switch 10-30cm

1 review

Photoelectric switch sensor DC 10-30V power supply Working current: 200mA Induction distance: 5-30cm Response time: 1ms Output form: DC three-wire normally open NPN NO Detection object: Transparent / opaque object

Reference: RBD-2215

4 Channel Infrared Line Following and Obstacle Sensor

Working voltage (V): 3.3 ~ 5 Working current (A): Above 1A Operating Temperature (℃): -10 ~ +50 Mounting hole: M3 Detection range: 1mm ~ 60 cm adjustable.

Reference: RBD-2330

AS7343 Visible Spectrum Infrared Color Spectrometer Sensor

The AS7343 is a 14-channel highly versatile, multi-purpose spectral sensor enabling new consumer, commercial, industrial and laboratory applications. It is optimized for reflective, transmissive and emissive measurements including color matching, fluid or reagent analysis or general spectral reconstruction. The spectral response is defined by individual...

Reference: RBD-2332

5mm Infrared Emitter and Detector

2 reviews

Infrared Photodiode Transmitter 5mm Infrared Photodiode Receiver 5mm

Reference: RBD-2420

HW-488 Infrared Obstacle Avoidance IR Sensor Module

Detection distance: 2-40cm IO Interface: 4-wire interfaces (- / + / S / EN) Output signal: TTL level Adjustment: adjust multi-turn resistance Effective angle: 35 °

Reference: RBD-2474

TSAL620 Super-bright 5mm IR LED 940nm High Power Infrared Emitting Diode

Infrared LEDs are used for remote controls (they're the little LED in the part you point at your TV) and 'night-vision' cameras, and these little blue guys are high powered ones! They are 940nm wavelength, which is what nearly all devices listen to. They're 20 degree beamwidth, and work great for any kind of remote control application.

Reference: RBD-2598

Brand: RoboticsBD

Digital Line Following Sensor 8 Array V2

2 reviews

Precise Line Following: Navigate black lines on white surfaces with 8 high-resolution sensors. Easy Microcontroller Integration: Connect directly to your microcontroller with digital outputs. Fast and Responsive: Achieve accurate line following even at high speeds. Simple Calibration: Calibrate sensors quickly and easily with a large knob. Versatility:...

Reference: RBD-2661

IR Beam Interruption Sensor - LED 3mm - 0-50 cm

The sensor reacts to an interruption in the beam of infrared light that is transmitted between the transmitter and receiver. When the beam is interrupted by another object, the receiver signals this event by lighting up. The module is equipped with a 3 mm IR LED with an illumination angle of 10°. Beam interruption systems are used e.g. in measuring gates.

Reference: RBD-2763

Optical Infrared Reflective Sensor Module

Uses infrared to detect a reflective line on the floor.

Reference: RBD-2836

TCRT 5000 Dual Channel Line Tracking Sensor

Operating Voltage: 3.5V-5V Supply Current: 15mA Optimal Sensing Distance: 3mm Designed with the reflected infrared sensor, indicator light. Built in a potentiometer for sensitivity control. On-board LM393 voltage comparator chip and infrared sensing probe TCRT5000L Signal detection sensitivity can adjust Reserve all the way more circuits (P3 voltage drawn)

Reference: RBD-2842

QRE1113 IR LED Infrared Reflection Sensor Module

The QRE1113 breakout board offers a digital output solution, utilizing a capacitor discharge circuit to assess reflection levels. This compact board is designed for line sensing applications, particularly suitable when only digital I/O pins are available in the system. It is compatible with both 3.3V and 5V systems, providing versatility in various...

Reference: RBD-2889

IR Infrared 940nm Transmitter Module

IR transmitter Iduino emitting light with a wavelength of 940 nm. Works with voltage of 5 V. The kit includes a cable 3-pin.