Filter By

Categories
Categories
Jumper Wire Type
Jumper Wire Type
Availability
Availability
Brand
Brand
Condition
Condition
Weight
Weight
Price
Price
Resistor Pack of 5
Resistor Pack of 5
  • How to Place an Order

  • Store Pick Up

  • Request for Quotation/ International Sourcing

  • Order Status

Jumper Wire Single 20cm Robotics Bangladesh
Quick view

Reference: RBD-1354

Jumper Wire Single 20cm

Length: 8 inches/20 CM (Long) Material: Copper Plated Pin Spacing: 2.54mm.

Price BDT 3
More
In-Stock
Choose Your Size
Quick view

Reference: 0984

Heat Shrink Tube

Choose your desire Heat Sink Size from below: 

Price BDT 2
More
In-Stock
MIFARE Classic 1K RFID NFC Smart Card 13.
Quick view

Reference: RBD-0351

MIFARE Classic 1K RFID NFC Smart Card 13.56MHz Printable

Contactless transmission of data and supply energy (no battery needed) Operating distance: Up to 100mm (depending on antenna geometry) RoboticsBD Operating frequency: 13.56MHz Data transfer: 106 kbit/s Data integrity: 16 Bit CRC, parity, bit coding bit counting Anticollision Typical ticketing transaction: <100 ms ( including backup management)...

Price BDT 35
More
In-Stock
470 Ohm 1/4w - Pack of 5
Quick view

Reference: 0245

Kiloohm (KΩ) 1/4w Resistors - Pack of 5

Choose your desire Resistor value from below: 

Price BDT 5
More
In-Stock
Jumper Wire 40 Pcs Set 20cm Robotics Bangladesh
Quick view

Reference: 0031

Jumper Wire 40 Pcs Set 20cm

3 Types Available (Please select from option) 1. Male to Male  2. Male to Female 3. Female-Female

Price BDT 100
More
In-Stock
Buzzer
Quick view

Reference: 0766

Ohm (Ω) 1/4w Resistors - Pack of 5

Choose your desire Resistor value from below: 

Price BDT 5
More
In-Stock
5 mm Green LED (Pack of 5)
Quick view

Reference: RBD-0768

5 mm Red LED (Pack of 5)

Size: 5mm Color: RED Head Shape: Round Lens Appearance: Transparent

Price BDT 5
More
In-Stock
Push Button Switch (2PIN) Robotics Bangladesh
Quick view

Reference: RBD-0761

Push Button Switch (2PIN)

Breadboard friendly Mounting Style: Through Hole Mounting Direction: Vertical

Price BDT 5
More
In-Stock
Buzzer
Quick view

Reference: RBD-0758

BC547 NPN Transistor

BC547 NPN DIP Transistor

Price BDT 4
More
In-Stock
Jumper Wire Single 30cm Robotics Bangladesh
Quick view

Reference: 1353

Jumper Wire Single 30cm

Length: 12.5 inches/30 CM (Long) Material: Copper Plated Pin Spacing: 2.54mm.

Price BDT 5
More
Out of Stock
All best sellers

There are 208 products.

Showing 1-32 of 208 item(s)
Active filters
  • Categories: 3D Printer
  • Categories: Robots
  • Categories: Battery & Charger
  • Categories: Retired Products
XTAR VC2 Charger with LCD Screen Display for 18650 26650 Battery
Quick view

Reference: RBD-0954

XTAR VC2 Charger with LCD Screen Display for 18650 26650 Battery

Tell you the real capacity of your battery! LCD display show all info you want Micro-USB powered, charge everywhere at your will Charge all popular Li-ion batteries Unique efficient charge method (TC-CC-CV) with 0.5Ax2.

Price BDT 1,950
More
In-Stock
Mini RC Quadcopter 2013 Robotics Bangladesh Robotics Bangladesh
Quick view

Reference: RBD-0042

Mini RC Quadcopter 2013 Robotics Bangladesh

Latest 6-axis flight control system with adjustable gyro sensitivity Permits super stable flight Lightweight airframe with nice durability

Price BDT 3,500
More
Out of Stock
Battery 9V Robotics Bangladesh
Quick view

Reference: RBD-0652

Battery 9V

Constant 9V Output till lasts Metal Jacket Body Good Built Quality and hence Leakproof Easy to install and Replace Corrosion free Connector Point for long-term use 0% Mercury and Cadmium. Environment-friendly OEM Compatible. RoboticsBD

Price BDT 74
More
In-Stock
Mini Cooling Fan 12V DC
Quick view

Reference: RBD-0727

12V Mini Cooling Fan 40x40x10mm

Operating Voltage: 12VDC Power Consumption: 1.42 W Body and Blade Constructed from Thermoplastic PBT of UL 94V-0 Single Phase 4 Pole Brushless DC Motor Precise Vapo Bearing Counterclockwise Rotation Direction if Viewed from front of Fan Blade

Price BDT 150
More
In-Stock
- BDT 10 Reduced price 14500 Rechargeable Lithium Battery 1300mah 3.
Quick view

Reference: RBD-0836

14500 Rechargeable Lithium Battery 1300mah 3.7v

Model: 14500 Type: Li-Ion Battery Mark Capacity: 850mah Nominal Voltage: 3.7v Color:    Blue    Weight: 17g Rechargeable Battery: Yes Note: It's a clone battery so the ampere couldn't be guaranteed.

Price BDT 80 Regular price BDT 90
More
In-Stock
18650 Li-ion Rechargeable Battery Robotics Bangladesh
Quick view

Reference: RBD-0837

18650 Li-ion Rechargeable Battery

Capacity (mAh): 960-1500 Output Voltage: 3.7V High energy density High working voltage for single battery cells. Pollution-free Long cycle life ***It's a clone battery so the ampere couldn't be guaranteed. RoboticsBD

Price BDT 95
More
In-Stock
Lipo Battery 1000mAh 11.1V 3S Robotics Bangladesh
Quick view

Reference: RBD-0927

Lipo Battery 1000mAh 11.1V 3S

Weight: 85 gm. Voltage : 11.1 V. Dimensions : 17 x 34 x 72(mm ). Max Continuous Discharge : 25 C(25 A). Balance Plug : JST-XH. Discharge Plug : XT-60.

Price BDT 1,450
More
In-Stock
Lipo Battery 1500mAh 11.1V 3S Robotics Bangladesh
Quick view

Reference: RBD-0929

Lipo Battery 1500mAh 11.1V 3S

Weight : 97 gm Voltage: 11.1V Capacity: 1500mAh Cell Type: Li-polymer Configurations: 3S Continuous Discharge Rate: 25C Max Burst Rate: 90C Discharge(Output) Lead: T Plug Connector Charging(Balancing) Lead: JST-XHR Wire Length: 100mm Operating Temperature Range: -20℃to 60℃ PVC color: Silver and Black

Price BDT 1,750
More
In-Stock
Lipo Battery 3300mAh 11.1V 3S Robotics Bangladesh
Quick view

Reference: RBD-0931

Lipo Battery 3300mAh 11.1V 3S

Weight : 190 gm Voltage: 11.1V Capacity: 3300mAh Cell Type: Li-polymer Configurations: 3S Continuous Discharge Rate: 25C Max Burst Rate: 90C Discharge(Output) Lead: T Plug Connector Charging(Balancing) Lead: JST-XHR Wire Length: 100mm Operating Temperature Range: -20℃to 60℃ PVC color: Silver and Black

Price BDT 3,490
More
In-Stock
XTAR VC4 Charger for...
Quick view

Reference: RBD-0955

XTAR VC4 Charger for Lithium-ion and Ni-MH Batteries

Clearly see what’s going on with the batteries. Tachometer-style LCD display shows detailed charging status Powered by any 5V USB power Intelligently chooses charging currents from 0.1A to 1A Wide adaptability, adapts from 10440 to 32650, from Li-ion to Ni-MH Energy-saving LCD backlight, can be turned off at your will.

Price BDT 2,899
More
In-Stock
3.7V 600mAh 25C Lipo Battery for Eachine X73 QX95 QX90 QX80 QX100 Robotics Bangladesh
Quick view

Reference: RBD-1073

3.7V 600mAh 25C Lipo Battery for Eachine X73 QX95 QX90 QX80 QX100

3.7V 600mAh 25C Lipo battery Product Type: Lithium Polymer Battery Pack The LiPo battery has matched resistance. Good Temperature Control. Minimum weight in Class

Price BDT 450
More
In-Stock
Lipo Battery 1000mAh 7.4V 2S Robotics Bangladesh
Quick view

Reference: RBD-1258

Lipo Battery 1000mAh 7.4V 2S

Model No: XW Power Eagle Lipo 1000mAh 7.4V 2S 25C Lipo Battery (T Plug Connector) Weight: 76 gm. Voltage: 7.4V. Dimensions : 26x34x72 (mm ). Max Continuous Discharge : 25C(25A). Balance Plug: JST-XH. Max Burst Discharge: 90 C (50A). Discharge Plug: T-Plug.

Price BDT 1,020
More
In-Stock
Lipo Battery 1500mAh 7.4V 2S Robotics Bangladesh
Quick view

Reference: RBD-1259

Lipo Battery 1500mAh 7.4V 2S

Model No: XW Power Eagle Lipo 1500mAh 7.4V 2S 25C Lipo Battery (T Plug Connector) Weight: 76 gm. Voltage: 7.4V. Dimensions : 26x34x72 (mm ). Max Continuous Discharge : 25C(25A). Balance Plug: JST-XH. Max Burst Discharge: 90 C (50A). Discharge Plug: T-Plug.

Price BDT 1,300
More
In-Stock
PLA Filament 1.75mm Plastic For 3D Printer 1kg/Roll Robotics Bangladesh
Quick view

Reference: RBD-1315

PLA Filament 1.75mm Plastic For 3D Printer 1kg/Roll

Great bio-compatibility, excellent transparency and environment-friendly Low shrinkage, good round shape Accurate diameter (±0.02mm) Easy to print with stable printing performance Various colors are available 100% bio-degradable and FDA food safety approved

Price BDT 2,650
More
In-Stock
Nema 17 Stepper Motor 17HS4401S Robotics Bangladesh
Quick view

Reference: RBD-1390

Nema 17 Stepper Motor 17HS4401S

Nema17 Bipolar. Number of Phases: 2. Step Angle: 1.8°. Phase Voltage: 2.6Vdc. Phase Current: 1.7A. Resistance: 1.5Ω ±10%. Inductance: 2.8mH ±20% (1KHz). Number of Wire: 4 (100cm Length). Holding Torque: 43N.cm. Shaft Diameter: Ø5mm. Motor Length: 40mm. Mass: 270g.

Price BDT 1,350
More
In-Stock
Robotic Arm Edge Kit Robotics Bangladesh
Quick view

Reference: RBD-1565

Robotic Arm Edge Kit

MODEL: Robotic Arm Edge Kit based on OWI-535 WEIGHT: 4.00kg DIMENSIONS: 40.00cm x 30.00cm x 8.50cm

Price BDT 8,999
More
In-Stock
- BDT 21 Reduced price 3.7V 18650 Rechargeable Battery Solderable Robotics Bangladesh
Quick view

Reference: RBD-1687

3.7V 18650 Rechargeable Battery Solderable

Model No.: ISR18650-1300 Capacity (mAh): 750-1300 (Copy) Output Voltage: 3.7V High energy density High working voltage for single battery cells. It's a clone battery so the ampere couldn't be guaranteed.

Price BDT 84 Regular price BDT 105
More
In-Stock
Doublepow 1.2V AAA 900mAh Battery (Pair) Robotics Bangladesh
Quick view

Reference: RBD-1908

Doublepow 1.2V AAA 900mAh Battery (Pair)

Doublepow AAA 900MAH Battery 2pcs/Set 1.2V Ni-MH Rechargeable Battery

Price BDT 190
More
In-Stock
6v 2800mah AA NI-MH Battery Robotics Bangladesh
Quick view

Reference: RBD-1909

6v 2800mah AA NI-MH Battery

6v 2800mah AA NI-MH Battery Rechargeable Battery Pack JST Plug 

Price BDT 1,050
More
In-Stock
LilyPad Coin Cell CR2032 Battery Holder Switched - 20mm Robotics Bangladesh
Quick view

Reference: RBD-2042

LilyPad Coin Cell CR2032 Battery Holder Switched - 20mm

Model: LilyPad Color: Purple Material: CCL Dimensions: 30 x 30 x 6 (LxWxH) mm. Weight: 3 gm.

Price BDT 180
More
In-Stock
PLA+ Filament 1.75mm Plastic For 3D Printer 1kg/Roll Robotics Bangladesh
Quick view

Reference: RBD-2107

PLA+ Filament 1.75mm Plastic For 3D Printer 1kg/Roll

Great bio-compatibility, excellent transparency and environment-friendly Low shrinkage, good round shape Accurate diameter (±0.02mm) Easy to print with stable printing performance Various colors are available 100% bio-degradable and FDA food safety approved

Price BDT 3,050
More
In-Stock
3D Printer Nozzle M7 Thread Brass 1.
Quick view

Reference: RBD-2182

3D Printer Nozzle M7 Thread Brass 1.75mm

Filament Support: 1.75mm Material: High-quality brass Color: Brass color Screw outer diameter: M7 If you are not sure which Nozzle size to choose, Please check our guide in the documentation tab below. 

Price BDT 190
More
In-Stock
Creality Ender-3 V3 SE 3D Printer Robotics Bangladesh
Quick view

Reference: RBD-2436

Brand: Creality Official

Creality Ender-3 V3 SE 3D Printer

Creality Ender-3 V3 SE 3D Printer Max printing speed of 250mm/s and 2500mm/s² acceleration Auto leveling with CR Touch & Strain Sensor for precise prints "Sprite" Direct Extruder for PLA, PETG, and flexible TPU Stable Dual Z-axis and Y-axis Dual Linear Shafts for reliable printing Auto filament loading and unloading for easy filament changes

Price BDT 39,490
More
In Stock
New DoublePow 9V Battery with DP-D01 Charger Combo Robotics Bangladesh
Quick view

Reference: RBD-2712

DoublePow 9V Battery with DP-D01 Charger Combo

Tired of constantly replacing and disposing of 9V batteries for your electronics projects or robots? The Rechargeable DoublePow 9V Battery 280mAh with DP-D01 Charger is the perfect solution for you. This package includes both a high-capacity rechargeable battery and a versatile charger to meet your power needs efficiently and sustainably. Save Money...

Price BDT 845
More
In-Stock
New 3.7V 1000mAh 25C Lipo Battery
Quick view

Reference: RBD-2861

3.7V 1000mAh 25C Lipo Battery

3.7V 1000mAh 25C Lipo battery Product Type: Lithium Polymer Battery Pack The LiPo battery has matched resistance. Good Temperature Control. Minimum weight in Class

Price BDT 540
More
In-Stock
Hiwonder 6DOF Metal Robotic Arm with Controller Robotics Bangladesh
Quick view

Reference: RBD-1244

Hiwonder 6DOF Metal Robotic Arm with Controller

Aluminum body with high torque metal gear servos 6 DOF structural design makes the robot arm move flexibly Up to 17Kg torque for joint servos Various control ways

Price BDT 21,999
More
In-Stock
Creality CR-10 Smart Pro 3D Printer Robotics Bangladesh
Quick view

Reference: RBD-2437

Brand: Creality Official

Creality CR-10 Smart Pro 3D Printer

Build area: 300 x 300 x 400 mm Maximum print head temperature: 300°C Maximum bed temperature: 100°C Communication: WiFi, USB Supported materials: PLA, ABS, PETG, TPU, PA, and carbon fiber composites.

Price BDT 86,245
More
In Stock
18650 Battery Holder 4S with wire
Quick view

Reference: RBD-0925

18650 Battery Holder 4S with wire

Hold 4 standard 18650 batteries. Wire Length: 15 cm. Output: 14.8 V. Dimension (Appro.) : 80 x 76 x 18 mm. Weight: 28 gm. High-quality plastic material

Price BDT 100
More
In-Stock
Creality CR-10 Smart 3D Printer Robotics Bangladesh
Quick view

Reference: RBD-1733

Brand: Creality Official

Creality CR-10 Smart 3D Printer

Built-in WIFI function: Remote control printing anytime, anywhere; A Bit More Intelligence Ultra-silent Design: 32 Bit Mute Board and Mute Fan Design; Intelligent Auto-leveling: V2.0 Auto leveling way, is the same with CR-6 SE. Screen Protection & Auto-shutdown;. Safe and worry-free save energy and power. 6-steps to assemble 8 minutes to complete,...

Price BDT 72,990
More
Out of Stock
xArm 1S Intelligent Bus Servo Robotic Arm Manipulator for Programming Robotics Bangladesh
Quick view

Reference: RBD-2123

xArm 1S Intelligent Bus Servo Robotic Arm Manipulator for Programming

STM32 chip for the main controller Easy Visual Operation Interface Support wireless handle control, smart phone APP and mouse control Provide graphical PC software and detailed tutorials The current Stock comes unassembled.

Price BDT 28,990
More
In-Stock
Lynxmotion AL5D 4DOF Robotic Arm SSC-32U Combo Kit (FlowBotics Studio)
Quick view

Reference: RBD-0375

Lynxmotion AL5D 4DOF Robotic Arm SSC-32U Combo Kit (FlowBotics Studio)

AL5D arm with SSC-32U USB board and powerful PC software Advanced inverse kinematics positioning control using mouse Includes license for full version of FlowBotics Studio Programming Software Wrist rotate sold separately (three options)  

Price BDT 70,000
More
Out of Stock
Creality Ender-3 V2 3D Printer Robotics Bangladesh
Quick view

Reference: 1403

Brand: Creality Official

Creality Ender-3 V2 3D Printer

Replaced with New Version Creality Ender-3 V3 SE 3D Printer. Click Here

Price BDT 43,950
More
Out of Stock