Reference: RBD-0169

Flex Sensor 2.2"

5 reviews

Flex length: 5.6 cm. Total Length: 2.2″ (7 cm). Life Cycle : >1 million. Height : 0.43mm (0.017″), Flat Resistance: 10K Ohms ±30%. Power Rating: 0.5 Watts.

Reference: RBD-0276

INA125P IC

1 review

LOW QUIESCENT CURRENT: 460µA PRECISION VOLTAGE REFERENCE: 1.24V, 2.5V, 5V or 10V SLEEP MODE LOW OFFSET VOLTAGE: 250µV max LOW OFFSET DRIFT: 2µV/°C max

Reference: RBD-0335

E-TECH SimonK 30A Brushless ESC Speed Controller

Features: Simonk Programe, Perfect drive Low voltage, over heat protection, with power on self detection function MCU and BEC with independant regulator, high anti-interference ability Throttle stroke adjustable, compatiable with different receivers, good low speed performance

Reference: RBD-0381

APM 2.6 Pixhawk Power Module V1.0

5 reviews

Operating Voltage:6~28 VDC Max Input Voltage:28 V DC Max Current Sensing: 90 A Connecting Type:XT-60 RoboticsBD

Reference: RBD-0189

Brand: DFRobot

Xbee Shield for Arduino (without Xbee)

Xbee Shield for Arduino (without Xbee) INTRODUCTION: The XBee Expansion Board is a compliant solution designed to meet low-cost, low-power wireless sensor networks with special needs.The module is easy to use, low power consumption, and the provision of critical data between devices reliable transmission.

Reference: RBD-0437

600TVL 1/4 1.8mm Lens CMOS 170 Degree Wide Angle CCD Mini FPV Camera NTSC

3 reviews

Power supply range: 3.7-5V 100mA Resolution: 1280 x  960 Resolution: 600TVL Illumination: 0.5LUX Format: PAL / NTSC Audio Lens: Wide-angle 1.8mm (170º) Image sensor:1/4 CMOS image sensor Sensitive area: 3.5964mm x 2.7084mm Size of the lens: M10

Reference: RBD-0957

FlySky FS-RX2A Pro 2.4Ghz Receiver

1 review

Item name: FS-RX2A Radio receiver Channel: 10 RF Range: 2.408-2.475GHZ Number of bands: 135 RX Sensitivity: -92dBm 2.4GHz protocol: AFHDS 2A Signal output: IBUS, PPM Compatible Transmitter: All AFHDS 2A Transmitter, Ex.: FS-I6, FS-I6X, FS-I6S, FS-TM8, FS-TM10, FS-I10.

Reference: RBD-2295

CC2530+CC2591 Zigbee Module Wireless Power Amplification Development Board with SMA Antenna

The CC2530 ZigBee series wireless module launched by BEE Iot Technology is a ZigBee RADIO frequency module developed based on TI's CC2530F256 chip. The module can complete ZigBee learning, project application, and industrial production, and can be widely used in the field of short-distance wireless communication networking. It can build powerful network...

Reference: RBD-2505

RS232 Bluetooth Serial Adapter Communication Master-Slave Module

RS232 Bluetooth Serial Adapter Communication Master-Slave Module

Reference: RBD-0307

MLX90614 Contactless Temperature Sensor Module For Arduino

2 reviews

Operating Voltage(V): 3- 5 Operating Current(mA): 2 Communication protocol: I2C Power saving mode Automotive grad Small size, low cost. RoboticsBD

Reference: RBD-2514

5V Electromagnet - 10 Kg Holding Force - P30/22

Nominal Voltage: 5V DC Current Draw: 0.6 Amps at 5V Holding Force: 10 Kg / 22 lb Approximate Pickup Weight: 2 Kg / 4 lbEver wanted to feel like Magneto? Well, now you sort of can! Bring the ferromagnetic objects in the world under your control with an Electromagnet The simplest way to make an electromagnet is to get a solenoid, pass some current through...

Reference: RBD-2563

Flywing 30A 2s-3s Brushless ESC 1000KV-1400KV 5V/2A for RC Airplane

Introducing the FLYWING Brushless ESC, a high-performance electronic speed controller designed for RC airplane models and hobby planes. This ESC offers reliable and top-quality components to enhance the overall performance of your RC aircraft.

Reference: RBD-0695

MAX31865 SPI PT100/PT1000 RTD-to-Digital Converter Board

Integration Lowers System Cost, Simplifies Design Efforts, and Reduces Design Cycle Time High Accuracy Facilitates Meeting Error Budgets 15-Bit ADC Resolution; Nominal Temperature Resolution 0.03125NC (Varies Due to RTD Nonlinearity) Total Accuracy Over All Operating Conditions:

Reference: RBD-0341

Tiger LiPo Battery 1100mAh 3S 25C

Specification: battery Capacity : 1100mahbattery Voltage : 11.1 VoltBattery Size : 62*32*25 mmBattery Weight : 84 GramMax continuous discharge : 25CCharge Plug/Discharge Plug : XT60

Reference: RBD-1870

RS485 To TTL Module Stable UART Serial Port To RS485 Converter Function Board

Compatible with 3.3V and 5.0V power supply. Compatible with 3.3V and 5.0V signal.  Semi-hole pads, onboard module, thin PCB, having a thickness of 0.8mm.  Has RXD, TXD signal indicator light, monitor send and receive status.

Reference: RBD-2396

GPS Module NEO-7M Satellite Positioning Module for Arduino with MicroUSB

1 review

GPS Module NEO-7M Satellite Positioning Module for Arduino with MicroUSB

Reference: RBD-2221

10.525GHz HB100X Microwave Sensor Module

Microwave sensor module Uses 10.525 GHz band to detect movement Easy to use, can be connected directly to a microcontroller Built-in amplifier Ideal for use with a microcontroller Widely used in industrial, transportation, and civil devices

Reference: RBD-2329

LSM6DS3TR-C IMU 3D digital Accelerometer & Gyroscope Module

The LSM6DS3TR-C is a system-in-package featuring a 3D digital accelerometer and a 3D digital gyroscope performing at 0.90 mA in high-performance mode and enabling always-on low-power features for an optimal motion experience for the consumer.

Reference: RBD-2448

Keyes 3 Axis Accelerometer Module KY-143 MMA8452Q 5V

This module serves to breakout the MMA8452Q chipset, a chip capable of providing 3 axis acceleration readings. The chipset features a 3 axis accelerometer (±2-8g) and an internal dropout regulator to allow the use of 5V and 3.3V supplies. When combined with free libraries it is possible to utilize the chipset's processing power to perform data conversions...

Reference: RBD-2778

XKC-Y25-V Intelligent Non-Contact Liquid Water Level Sensor with 1m Wire

Input Voltage: (InVCC) DC 5 ~ 24 V Power Consumption: 5mA Output Current: 1 ~ 100mA Communication: RS485 Material: ABS Waterproof Performance: IP67

Reference: RBD-2390

L298N PCB Driver Module Quad High-Power 4-Channel Smart Auto Motor Driving Board

Forward and reverse rotating :Forward and reverse rotating motor can be realized, can meet the needs of various working scenarios. Good production performance :Excellent production technology, not easy to cold joint, reliable and safe for you to use. Multiple good ability :With characteristics of strong driving ability, low heat dissipation and strong...

Reference: RBD-2779

XKC-Y25 24V NPN Intelligent Non-Contact Liquid Water Level Sensor with 1m Wire

Input Voltage: DC 24V Power Consumption: 5mA Output Current: 1-200mA Communication: NPN Material: ABS Waterproof Performance: IP67

Reference: RBD-2680

Arcade Joystick 360 Ball Top- Short Handle

4-way Pacman type arcade joystick. Heavy duty design gives this joystick a great feel! ABS plastic and solid alloy construction Uses 4 microswitches to detect on/off position Unique handle design Spring return to center Very rugged construction Rated 5A @ 125V, 3A @ 250V* Overall height: 101mm Base: 97x65mm Joystick height: 60mm 4-way, large...

Reference: RBD-2367

ESP32 S3-WROOM-1 Dual Type-C USB N16R8 Micropython Board

7 reviews

ESP32-S3-WROOM-1-N16R8(16M Flash/8SRAM) Powerful ESP32-S3 chip for enhanced processing capabilities Dual Type-C USB ports for easy connectivity Built-in Wi-Fi and Bluetooth for seamless communication 16MB flash memory for ample storage space 8MB PSRAM for efficient multitasking Micropython support for easy programming Ideal for IoT projects, robotics, and...

Reference: RBD-2371

Keyes Espressif ESP32-WROOM-32 Module Core Board

Our ESP32 core board is the perfect solution for anyone who wants an easy and convenient way to connect their peripherals. With our board, you'll have everything you need to develop and debug your own applications. The ESP-WROOM-32 module is a leading WiFi + Bluetooth solution that integrates with TSMC's low-power 40nm technology. This means that our...

Reference: RBD-2465

TFT LCD 2.8″ 240×320 RGB SPI Display with Touchscreen

1 review

Uses ILI9341 display and XPT2046 touch SPI controllers

Reference: RBD-2417

Arduino Nano Every Atmega4808

2 reviews

The Nano EVERY development board is designed as a replacement for the classic Arduino Nano - both by the layout of the pins and the shape of the board. The main microprocessor is the Atmel A4808 with larger RAM and FLASH memory compared to the classic nano. Another advantage is, for example, the ATSAMD11D14A converter, which does not require complex...

Reference: RBD-2764

ESP32-S3-WROOM-1-N16R8 UNO Development Board For DevKitC-1

The ESP32-S3-WROOM-1-N16R8 is a versatile Wi-Fi and low-power Bluetooth MCU module, featuring the advanced ESP32-S3 series chip. With its powerful performance, rich peripheral interfaces, and support for popular programming methods, this module offers a wide range of applications in various fields including IoT, AI, and smart devices.

Reference: RBD-2490

Arduino Ethernet Shield W5100 R3

1 review

Support TCP/IP protocol: TCP, UDP, ICMP, IPv4 ARP, IGMP, PPPoE and Ethernet Built-in 10BaseT/100BaseTX Ethernet physical layer Support automatic communication handshaking(full duplex and half duplex), Support automatic MDI/MDIX, automatically revise signal polarity Support ADSL connection (support PAP/CHAP certification mode in PPPoE protocol), Support...

Reference: RBD-2665

DC Buck Boost Power Module 5V-30V to 0.6V-30V 35W 4A CVCC Adjustable Step Up Down Converter with LCD Display

Introducing our versatile DC Buck Boost Power Module, a reliable solution for your power supply needs. This module offers both step-up and step-down functionality with overcurrent protection, ensuring safe and efficient operation. Key Features: Operating Voltage: DC 5V-30V Output Voltage: DC 0.6V-30V Output Current: 0-4A (with obstruction output...

Reference: RBD-2890

XY-CD63L 30A Battery Charging Control Module

XY-CD63L 30A Battery Charging Control Module Full Power off DC Voltage Protection Under Voltage Power Loss Protector30A Battery Charging Control Module CD63L Automatic Power-off Voltage Protection Without Shell

Reference: RBD-2559

Open Smart Rich Shield with Remote Control

This Rich Shield has various sensors, buttons, LEDs, a potentiometer, segment display and buzzer. Specifications: Suitable for Uno, Mega, Leonardo and other 5V Arduino's that use the Uno R3 pin layout Works on 5V Has various parts to learn the basics with Arduino IR Remote Control is included Handy I2C and UART (RX/TX) pins available