Reference: RBD-1354
Jumper Wire Single 20cm
Length: 8 inches/20 CM (Long) Material: Copper Plated Pin Spacing: 2.54mm.
Reference: RBD-1354
Length: 8 inches/20 CM (Long) Material: Copper Plated Pin Spacing: 2.54mm.
Reference: RBD-0351
Contactless transmission of data and supply energy (no battery needed) Operating distance: Up to 100mm (depending on antenna geometry) RoboticsBD Operating frequency: 13.56MHz Data transfer: 106 kbit/s Data integrity: 16 Bit CRC, parity, bit coding bit counting Anticollision Typical ticketing transaction: <100 ms ( including backup management)...
Reference: 0245
Choose your desire Resistor value from below:
Reference: 0031
3 Types Available (Please select from option) 1. Male to Male 2. Male to Female 3. Female-Female
Reference: RBD-0768
Size: 5mm Color: RED Head Shape: Round Lens Appearance: Transparent
Reference: RBD-0761
Breadboard friendly Mounting Style: Through Hole Mounting Direction: Vertical
Reference: 1353
Length: 12.5 inches/30 CM (Long) Material: Copper Plated Pin Spacing: 2.54mm.
Reference: RBD-2713
"Hrmph! All I have is a power supply with a 2.1mm plug and my doodly-whatsit has a 2.5mm jack. I keep trying to force the plug to fit but that 0.4mm difference just wont work....what am I going to do!?" ENTER The Adapter. This 2.1mm to 2.5mm adapter is the best way to adapt a 2.1mm plug so that it will fit into a 2.5mm jack. Remember that this will fit...
Reference: RBD-2431
Never get frustrated with 2mm-pitch modules again! Each one of these 40-pin break-apart header packs contains 1 pieces of 40-pin, 2mm pitch headers. Great for when you need to connect to something with 2mm pitch. Stack these headers side by side or break them apart to receive your desired length. They are even gold plated to ensure longevity without...
Reference: RBD-2432
Single row. 2.0mm pitch. 1 x 40 pins. Through-hole mount. Gold plated.
Reference: RBD-2732
Compact module for creating 3.3V on 5V breadboards.
Reference: RBD-2434
Pogo pins are little spring-loaded contacts, very handy for making jigs, or making momentary (but electrically solid) contacts. We use them by the dozen for making programming and testing jigs but they're handy also if say you want to JTAG program a board that you cant solder headers to - just shove these thin contacts into a 0.1" pitch IDC programming...
Reference: RBD-2744
This power supply is an automatic step-up/down power supply module. When the output voltage remains constant, the input voltage is equal to the bottom, up or the output voltage. For example, to set output as 12V, the input voltage between 5 ~ 32V output voltage is always 12V. It can achieve continuous voltage, constant voltage, under-voltage protection,...
Reference: RBD-2435
Pogo pins are little spring-loaded contacts, very handy for making jigs, or making momentary (but electrically solid) contacts. We use them by the dozen for making programming and testing jigs but they're handy also if say you want to JTAG program a board that you cant solder headers to - just shove these thin contacts into a 0.1" pitch IDC programming...
Reference: RBD-2742
AC input: AC 110-240V AC frequency: 50HZ/60HZ Output voltage: DC 24V Output Current: 4A-6A Output Power: 100W Modulation: Pulse width modulation
Reference: RBD-2767
Input voltage :10-32V Output voltage: 12-35V (adjustable) Output Current: 10A (MAX) Input Current: 16A (MAX) (Please enhance heat dissipation if more than 10A) The non-isolated step-up power conversion module Onboard LED illuminates when the voltage is applied to the module Equips Multi-turn Potentiometer.
Reference: RBD-0961
COM-MPB2-TP MICRO DESIGN SYSTEMS MPB2-TP 97-003-01/4 V 4.00 COM-MPB2-TPMulti Protocol Board MPIMicroPanel Romaco
Reference: RBD-2478
A-Type USB Female Connector PCB Mount Right Angle Gender: Female USB Type: USB A 2.0 Pins: 4
Reference: RBD-2787
Play and measure the current, voltage, power and other parameters of various DC power adapters Use the DC power supply to connect the DC independent power supply port of the load meter, and then use the "Settings" button to connect as shown in the figure below. Precisely adjust the current to test the voltage and rated current of the power supply The DC...
Reference: RBD-2479
USB-C is quickly becoming more and more prominent in the maker community because, let’s be honest, who likes trying three times to insert USB into a port? This is a 16-pin, female, USB Type C connector that is commonly found in smart phones, laptops, and other newer electronics. Each USB-C connector will require PTH soldering to secure it to your board...
Reference: RBD-2837
Battery Charger with Display - 6-60V 30A Ensure optimal battery performance with the XY-L30A 6-60V Battery Charge Control Module. Designed for 6V to 60V DC batteries, this programmable charger offers complete charge and discharge control for lead-acid and rechargeable batteries. Automatic battery protection, adjustable charge settings, and an LCD display...
Reference: RBD-2843
Ensure uninterrupted power supply with the Automatic Power Switch Module. This module offers seamless switching between the power supply and battery, ensuring continuous operation even during power outages. When the power supply is available, it prioritizes supplying power to the load, while simultaneously charging the battery. Equipped with...
Reference: RBD-2849
ALOEU Parameter setting: 1. Press and hold the set key to enter the parameter setting interface; 2. After entering the parameter setting interface, short press the set key to switch the set parameters; 3. After the parameters are , they can be set by up / down key. Short press and long press are supported; 4. If you want to set other parameters, repeat...
Reference: RBD-2481
These are good quality disposable acid brushes for cleaning electronic assemblies and many other uses around the work bench or home.
Reference: RBD-2575
A gender changer is a hardware device placed between two cable connectors of the same type and gender. An example is a cable connector shell with either two female or two male connectors on it (male-to-male or female-to-female), used to correct the mismatches that result when interconnecting two devices or cables with the same gender of connector.
Reference: RBD-2576
A gender changer is a hardware device placed between two cable connectors of the same type and gender. An example is a cable connector shell with either two female or two male connectors on it (male-to-male or female-to-female), used to correct the mismatches that result when interconnecting two devices or cables with the same gender of connector.
Reference: RBD-2890
XY-CD63L 30A Battery Charging Control Module Full Power off DC Voltage Protection Under Voltage Power Loss Protector30A Battery Charging Control Module CD63L Automatic Power-off Voltage Protection Without Shell
Reference: RBD-2660
Upgrade your project's connectivity with the Type-C USB Jack 3.1. This versatile Type-C connector features a female jack and is designed to enhance charging and power transfer capabilities. With 4-pin configuration options, this USB 3.1 Type-C socket offers reliable performance for a wide range of applications. Additionally, the inclusion of a...
Reference: RBD-2844
1x24P 5.08mm Pitch Round Terminal Pin Header (KF332)
Reference: RBD-0035
Controls Operator and display panel with background lighting Power supply Interface for expansion modules Interface for the program module (card) and a PC cable Pre-configured standard functions, e.g. on- and off-delays, pulse relay and softkey Timer Digital and analog flags Inputs and outputs, according to the device type.
Reference: RBD-0037
Obstacle Avoiding Robot is an intelligent device which can automatically sense the obstacle in front of it and avoid them by turning itself