- Raspberry Pi
- Mini Computer/ PC
- Arduino Shield
- Robotics Parts
- Industrial Shield
- Industrial IC
- Motor Driver
- Communication Module
- Robot Platform Chassis
- 3D Printed
- 3D Printer
- Power Adapter
- PLC Programming Cable
- Tools, Hardware & Accessories
- Home Automation
- Solar Panel
- Battery & Charger
Arduino UNO in Bangladesh The Arduino Uno is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller.
Solderless Large BreadboardA breadboard (or protoboard) is usually a construction base for prototyping of electronics. The term "breadboard" is commonly used to refer to a solderless breadboard (plugboard). Because the solderless breadboard for electronics does not require soldering, it is reusable. This makes it easy to use for creating temporary...
Fuji USB-CNV3 PLC Programming Cable
USB-CNV3:Fuji N-series PLC (NB, NJ, NS, NW0) USB programming cable,USB/RS422 interface,3 meters,with communication indicator.
Store Pickup Available!
USB-CNV3 is the programming cable in which USB interface provided both the serial connection and RS232 signal conversion. Under the control of computer-driven driver, the programming cable makes it possible for the computer's USB interface to simulate the traditional serial (known as COM interface), thus various existing programming software such as communications software, monitoring software and other applications can be normally used. The working power supply of this cable is directly from the USB port, but not the PLC programming interface. The two-color LED on the converter box indicates data’s transceiving status.
USB-CNV3 is applicable to Fuji N Series (NB, NJ, NS) PLC, support the largest communications distance is 1.5 km.
Features and technological index:
- Support USB-CNV3 operating system: Windows2000/XP (WinNT4/95/98/Me/DOS not included )
- Support USB-CNV3 programming software version: Flex V1.0 and above
- Fully compatible with USB V1.1 norms and USB CDC V1.1
- USB-bus powered, with current consumption of 50 mA
- Baud rate: 300 bps ~ 1Mbps automatically adapt to the standard baud rate
- Support UART data format: data bits: 7-8; stop bit: 1, 2; check-bit: odd / even / no parity
- support long-distance communications, the largest communications is 1.5 kilometer (19200 bps)
- Each PC only supports one USB cable programming
- Working temperature: -20 ~ +75 Degree
- Cable length: 3 m; Color: black
USB device drivers should be installed before using USB-CNV3 programming cable, which are available on the CD-ROM sold together with the cable. And for the specific installation steps, please refer to the instruction files on the CD-ROM drivers, and details are not necessarily listed here.
After completing Driver installation, the corresponding COM port for the USB-CNV3 programming cable will be displayed in the “Device Manager” of Window. The step next is just to choose this COM port in the programming software and other application software and keep other communication parameters as in the Default settings. And the following steps are exactly the same as in the traditional programming cables with RS232 interfaces.
The largest communications range between the USB-CNV3 programming cable and the PLC is up to 1.5 kilometers (19200 bps).
The user must follow the self-made plans to extend cable. Communication lines should be five 8-twisted pair (cable).
When the distance is over 1500 M , RS422 repeater (model: E485GA, products of Seawens as well)could be installed to extend the distance.
Please Note: USB interface cable cannot be extended.
1) A complete GPS module with an active antenna integrated, and a built-in EEPROM to save configuration parameter data.2) Built-in 25 x 25 x 4mm ceramic active antenna provides strong satellite search capability.3) Equipped with power and signal indicator lights and data backup battery.4) Power supply: 3-5V; Default baud rate: 9600bps.5) Interface: RS232 TTL
Siemens PLC Programming Cable S7-200PLC Download Line 901-3DB30-0XA0
USB switch serial cable USB-R232 CS1W-CIF31+ USB-CIF31 optical Isolation switch cable
Suitable Siemens PLC Programming Cable S7-200PLC Data Line USB-PPI Download Line 3DB30+ Isolation
Liquid Suspended Particles Turbidity Sensor Detection Module Kit