Camera Module - pcDuino V3 (2MP)

Raspberry Pi Model B (Made in UK)

This Product has been replaced by Raspberry Pi B+

Robotic Claw - MKII With Metal Servo

Description: This robotic claw is a step up from the classic. The MKII takes everything you loved about the standard robot claw from DAGU and makes some significant improvements! 

Pi Tin for the Raspberry Pi 2 Clear Case

Description: The Raspberry Pi B+ is everybody’s favorite  little computer, the last thing that you’d want is for something  bad to happen to it. Why not protect it with one of these  snazzy plastic enclosures?

Reference: Venus GPS Sparkfun

Brand: SparkFun Electronics

Venus GPS with SMA Connector

Features: Up to 20Hz update rate -148dBm cold start sensitivity -165dBm tracking sensitivity 29 second cold start TTFF 3.5 second TTFF with AGPS 1 second hot start 2.5m accuracy Multipath detection and suppression Jamming detection and mitigation SBAS (WAAS / EGNOS) support 67mW full power navigation Works directly with active or passive antenna

Brand: SparkFun Electronics

Beaglebone Black - Rev C

Description: The Beaglebone Black is a low-cost credit -card-sized development platform with good support from  a fast growing community. The Beaglebone Black differs  slightly from the regular version by providing you with an  onboard micro HDMI port, 512MB of DDR3L DRAM, 4GB  onboard flash memory, an AM3358 processor at 1GHz,  and making JTAG optional...

Reference: Sparkfun

Pi 3 B+ Wedge Kit GPIO Breakout Expansion Board

GPIO Extension Board: Compatible For Raspberry PI Module: T Type GPIO Extension Adapter GPIO Signal Ribbon Flat Cable:Length: 20cm Compatible For Raspberry Pi 3 Model B+GPIO Connector: 40-Pin This 40 Pin Ribbon Cable is Specially Designed For the Raspberry Pi Model 3, So You can Easily Connect it to the Low-Level Peripherals! Package Included:1 x T Type...

Brand: SparkFun Electronics

Off-Road Wheels - 120x60mm (2 pack)

Brand: SparkFun Electronics

RFID Starter Kit - Retail

Pi Tin for the Raspberry Pi B+ Black Case

Description: The Raspberry Pi B+ is everybody’s favorite  little computer, the last thing that you’d want is for something  bad to happen to it. Why not protect it with one of these  snazzy plastic enclosures?

Brand: SparkFun Electronics

Intel® Galileo

Documents: Schematic Datasheet Getting Started Guide Galileo Unread Email Counter Galileo Documents Product Page Product Video

Reference: Sparkfun

RFID Reader ID-20LA (125 kHz)

Description: RFID (radio-frequency identification) is the wireless non-contact use of radio-frequency electromagnetic fields, for the purposes of identifying and tracking tags attached to objects. This is the ID-20LA, a very simple to use RFID reader module from ID Innovations. With a built in antenna, the only holdup is the 2mm pin spacing. Power the...

Brand: SparkFun Electronics

Makey Makey Kit

Description: This is the same product as the Makey Makey Standard Kit. The difference is this version comes in fancy clamshell packaging meant for our distributors that need it. Regular customers are welcome to order, but we want to limit the amount of extra packaging finding its way into the trash heap.

Brand: SparkFun Electronics

Multi-Chassis - 4WD Kit (ATV)

Reference: DEV-12856

pcDuino3 - Dev Board

Description: The pcDuino3 is a high performance, cost effective mini PC platform that runs full-featured operating systems such as Ubuntu and Android. In addition to running Linux and Android, the pcDuino3 has support for programming languages such as C, C++, Java, Python, Arduino, and more. You can even use your favorite Arduino shields for added...

Brand: SparkFun Electronics

Graphic LCD 128x64 STN LED Backlight

Description: This is a framed graphical LCD 64x128 with  LED backlight. This unit is a very clear STN type LCD with  a simple command interface. This new module includes the negative voltage circuitry on board!

Brand: SparkFun Electronics

Rover 5 Robot Platform 4 Motors 4 Encoders

Rover 5 Robot Platform 4 Motors 4 Encoders Description: If you’re looking for a base for your next robot, look no further than the Rover 5. The Rover 5 uses 4 independent motors, each with a hall-effect quadrature encoder and gearbox.

Solenoid - 5v (small)

Description: Solenoids are a great way to induce linear motion  for pushing, pulling or controlling switches and levers.This smaller  solenoid is designed to work directly with 5V~6V which makes it a  great match for embedded projects. It has a throw of about 4.5mm  and 2 M2 mounting holes on the body.

Brand: SparkFun Electronics

Intel® Edison and Arduino Breakout Kit

Description: The Intel® Edison is an ultra small  computing platform that will change the way you  look at embedded electronics. Each Edison is  packed with a huge amount of tech goodies into  a tiny package while still providing the same  robust strength of your go-to single board computer.

Brand: SparkFun Electronics

LCD Cape - pcDuino V3 (1024x600 7" LVDS)

Description: This is a 7" LVDS LCD Cape for the pcDuino V3  with a 1024x600 screen resolution and capacitive touch from  LinkSprite. This massive screen is a great addition for the  pcDuino V3 that compliments its extreme versatility as a mini  PC development platform. 

Brand: SparkFun Electronics

SparkFun 9 Degrees of Freedom IMU Breakout - LSM9DS0

Description: This is the LSM9DS0, a versatile motion-sensing  system-in-a-chip that houses a 3-axis accelerometer, 3-axis  gyroscope, and 3-axis magnetometer. That’s right, 9 degrees  of freedom (9dof) from a single IC!

Brand: SparkFun Electronics

EL Wire - Starter Kit Retail

Reference: SparkFun

Raspberry Pi - Model B+ (Made in UK)

Replaced By New Raspberry Pi 3 Model B

Brand: SparkFun Electronics

Stepper Motor Driver