Reference: RBD-2099

Touch Sensor Switch Module

Main chip: LM393 Working voltage: for DC 5V Single-channel signal output Low-level output signal used for human body touch sensor alarm Adjustable sensitivity Pin Connector to board: 4 Pins

Reference: RBD-0665

Rain & Steam Detection Sensor Module

15 reviews

Operating voltage: 5V Provide both digital and analog output Adjustable sensitivity. RoboticsBD Output LED indicator Compatible with Arduino TTL Compatible Bolt holes for easy installation

Reference: RBD-1049

Snow Rain Drops Steam Detection Sensor Module

Operating voltage: 5V Provide both digital and analog output Adjustable sensitivity Output LED indicator Compatible with Arduino TTL Compatible Bolt holes for easy installation

Reference: RBD-1644

TOF10120 Laser Range Sensor Module Distance Sensor

1 review

940nm laser classified as class 1 under operation condition by IEC 60825-1:2014-3rd edition Small ceramic package(20×13.2×2.0mm) Long range absolute range measurement up to 1.8m within 5% accuracy at indoor

Reference: RBD-2303

MAX30102 Heart Rate and Pulse Oximeter Sensor Module

4 reviews

LED peak wavelength: 660nm/880nm LED power supply voltage: 3.3~5V Detection signal type: light reflection signal (PPG) Output signal interface: I2C interface

Reference: RBD-0667

DHT11 Temperature and Relative Humidity Sensor Module for Arduino

51 reviews

Input Supply Voltage (VDC): 3.3 ~ 5. Supply Current (mA): measurement 0.3mA standby 60μA. Temperature measurement range: 0~50 degrees. Temperature measurement error: ±2 degrees. Humidity measurement range: 20%~95%RH. Humidity measurement error: ±5%RH. RoboticsBD

Reference: RBD-1066

Mini Metal Detector Module

6 reviews

Operating voltage: 5V DC. Detector distance: 1CM. Adjust the potentiometer, let the modules work normally. Small and easy to use module. It comes with a Buzzer for metal detection indication.The Mini Metal Detector Module arrives disassembled, requiring assembly using a soldering iron and soldering accessories. Moderate knowledge of soldering and...

Reference: RBD-1645

GP2Y0E03 4-50CM Distance Sensor Module Infrared Ranging Sensor Module

Voltage operation: 2.7V-5V Measuring distance: 4 to 50 cm Output: Digital (I/C) / Analog Output Sensor: Infrared LED and CMOS image sensor

Reference: RBD-2451

Pulse Sensor 3.3-5V Heartbeat Heart Rate Monitor Sensor

Pulse Sensor 3.3-5V Heartbeat Heart Rate Monitor Sensor Easy to use finger-tip heart rate detector module with built-in noise filter and signal amplification.

Reference: RBD-0241

LM35 Temperature Sensor

31 reviews

Calibrated directly in Degree Celsius (Centigrade) Linear at 10.0 mV/°C scale factor 0.5°C accuracy guarantee-able (at a25°C) Suitable for remote applications Low cost due to wafer-level trimming Operates from 4 to 30 volts Less than 60 mA current drain Low self-heating, 0.08°C in still air Non-linearity only 0.25°C typical  LM35 (working) tested by...

Reference: RBD-1168

Digital TDS Meter Monitor TEMP PPM Tester

1 review

Item Name: TDS meter Meter Material: Plastic Display: LCD Digital Accuracy: +/- 2% Range: 0-9990 ppm

Reference: RBD-2452

Pulse Heart Rate Sensor Kit For Arduino

This Pulse Sensor is a heart rate sensor designed for Arduino microcontrollers. Development professionals use. The Pulse Sensor Kit brings you all the experience you need, a complete package. The kit includes: A 24inch 3p DuPont line, A soft Velcro Finger Strap, A sensor size sensor ear clip, 4 Velcro dots, and 9 transparent protective dot Pulse Sensor is...

Reference: RBD-2543

LPB40B IP65 DToF Single-Point Ranging LiDAR Sensor (0.05-40m, UART)

The LPB40B Single-Point Ranging LiDAR based on the DToF principle. The DToF technology enables the laser radar to work stably under strong outdoor lighting, further improving the stability and accuracy of distance measurement. It is capable of withstanding up to 100klux of ambient light, with a range of up to 40m indoors and outdoors. The overall accuracy...

Reference: RBD-0689

LM75A IIC I2C High Accuracy Digital Temperature Sensor

1 review

Operating Voltage: 2.8 V to 5.5 V Accuracy: ± 1.5°C Zero power resistance: 100 KΩ Operating temperature range: -55 ~ +125 ℃

Reference: RBD-1405

Turbidity Sensor Suspended Turbidity Value Detection Module Kit

3 reviews

Working voltage: 5.00V DC Working current: 40mA (MAX) Response time: <500ms Insulation resistance: 100MΩ (Min) Analogue output: 0~4.5V; Digital output: high/low-level signal (the corresponding threshold can be selected by adjusting the potentiometer) Operating temperature: -20℃~90℃

Reference: RBD-2933

Brand: DFRobot

RPLiDAR C1 - DTOF LiDAR 360° Laser Range Scanner (12m, IP54)

The RPLIDAR C1 is a new generation fusion-type DTOF (Direct Time of Flight) laser scanner from SLAMTEC. This advanced LIDAR system excels in high-definition detection of small and nearby objects, offering superior anti-interference and anti-adhesion capabilities. With a measurement radius of 12 meters, a sampling frequency of 5000 times per second, and...

Reference: RBD-0695

MAX31865 SPI RTD PT100 to Digital Converter Module

Integration Lowers System Cost, Simplifies Design Efforts, and Reduces Design Cycle Time High Accuracy Facilitates Meeting Error Budgets 15-Bit ADC Resolution; Nominal Temperature Resolution 0.03125NC (Varies Due to RTD Nonlinearity) Total Accuracy Over All Operating Conditions:

Reference: RBD-1671

ESP32 DHT11 WIFI Bluetooth Temperature Humidity Soil Moisture Sensor Module for Arduino

2 reviews

ESP32 Bluetooth Wi-Fi development board, support NodeMCU / Arduino DHT11 temperature and humidity sensor CP2104 communication chip USB TO TTL Micro USB port Soil probe (long) soil temperature and humidity detection module 18650 Lithium Battery Holder Powered (Battery is not included)

Reference: RBD-0830

Thermocouples - K Type 800C WRN-291 200mm Rod

2 reviews

Thermocouples - K Type 800C WRN-291 200mm Rod 7.8 inch Rod/ 200mm Rod Temperature measurement range is from 0 celsius to 800 celsius degree.  Screw Type

Reference: RBD-0923

DHT22 Original AM2302 Digital Temperature Humidity Sensor Module

18 reviews

Measuring range: temperature -40-80 ℃; humidity 0; 99.9%RH Measurement accuracy (25℃): temperature: + 0.5; humidity: + 2%RH (10; 90%RH) Resolution: temperature: 0.1 ℃, humidity: 0.1%RH Attenuation value: temperature: <1℃ / year; humidity: < 1%RH/ years High precision Capacitive type Full range temperature compensated Relative humidity and...

Reference: RBD-1717

TDS Meter V1.0 Module Water Quality Sensor for Arduino

4 reviews

Wide voltage operation: 3.3~5.5V 0~2.3V analog signal output, compatible with 5V, 3.3V two control systems The excitation source is an AC signal, effectively preventing probe polarization Waterproof probe for long-term immersion in water

Reference: RBD-1719

Envitec OOM202 Medical Ventilator Oxygen Sensor

Envitec Honeywell OOM202 Medical Ventilator Oxygen Sensor Made in GermanyManufacture Date: 2023 December

Reference: RBD-1833

Soil NPK Sensor Agricultural

NEW TYPE AVAILABLE CLICK HERE Measurement range: 0-199 mg/KG Measurement accuracy: +-2%F.s Resolution: 1mg/KG (mg/L) Response time (T90, s): less than 10 Communication port: RS485 Power supply: 5V-24v DC 

Reference: RBD-1062

AMG8833 IR Infrared 8*8 Thermal Imager Array Temperature Sensor

Temperature detection of the two-dimensional area: 8 × 8 (64 pixels). Digital output (capability of temperature value output). Compact SMD package (adaptively to reflow mounting). RoHS compliant.

Reference: RBD-1931

Soil NPK Sensor Agricultural RS485/Modbus

Easy to Measure High Precision Low measurement cost Resolution up to 1mg/kg (mg/l)

Reference: RBD-1063

W1209 Digital Temperature Controller

15 reviews

Temperature Control Range(°C): -50 to +110 Resolution @-9.9°C to +99.9°C: 0.1°C Resolution @all temperatures: 1°C Accuracy: 0.1°C Refresh Rate(s): 0.5 Supply Voltage(V): 12 Measuring Inputs: NTC10K Cable Length: 0.5 Meter Output Type: 1 Channel Relay Output Capacity: 10A

Reference: RBD-1935

Water Level Sensor Gold Coating

2 reviews

Water-level sensor indicates the level of water in an overhead tank Gold coated Long life time Simple working procedure

Reference: RBD-1969

Brand: DFRobot

pH Sensor Gravity Analog pH Sensor Meter Kit V2

2 reviews

Specifically designed to measure the pH of the solution and reflect the acidity or alkalinity. Improved precision and user experience. Compatible with 5V and 3.3V. Quickly build the pH meter, plug and play, no welding.

Reference: RBD-1190

NTC Thermistor 10K

12 reviews

Temperature Coefficient Type: NTC Thermal Time Constant: 10s Resistance  10kΩ Tolerance: ±1% Maximum Power Rating: 75mW Maximum Operating Temperature: +150°C Minimum Operating Temperature: -80°C Dimensions(dia.): 2 mm Length: 30mm Application: Compensation, Control, Measurement, etc.

Reference: RBD-2141

Anti-Corrosion Water Level Sensor with Ball Float Switch

Rating contract (Max.): 10 W Switching power supply (Max.): 110VDC Resistance contract (Max.): 100 Ω Appro. Float Ball Size (mm) : 24×17 (LxD) Body Total Length (mm) : 85 Cable Length (cm) : 37 Total Float opening: 70° Switch ON/OFF angle Approx. betn 15° to 20°

Reference: RBD-1198

DS18B20 Digital Thermometer

3 reviews

Industrial Systems Consumer Products Thermometers Thermally Sensitive Systems

Reference: RBD-2148

XKC-DS1603L V1 Ultrasonic Level Sensor Non-contact Sensing

Non-contact detection Suitable for liquids of various densities and forms Easy installation for all kinds of detection occasions Compatible with containers of various materials and thicknesses Reliable performance with anti-interference ability