Reference: RBD-1719

Envitec OOM202 Medical Ventilator Oxygen Sensor

Envitec Honeywell OOM202 Medical Ventilator Oxygen Sensor Made in GermanyManufacture Date: 2023 December

Reference: RBD-2237

15mm Piezo Ceramic Elements Sound Sensor

Sound pressure level: 85DB 10cm The input voltage: 30vp-p max Clear sound Ultra-thin and lightweight No contacts: therefore, no noise and highly reliable Operating Temperature: -20~70 Storage Temperature: -30-80

Reference: RBD-1751

MP-135 MP503 Air Quality Sensor Module

1 review

Detection Gas: H2, Alcohol, CO, VOC  Detection Range: 10～500ppmH2 5～500ppm Alcohol 10～500ppm CO Air Quality Sensor Module

Reference: RBD-2307

Stereo Enclosed Speaker 3W 8Ω

1 review

This speaker is a great addition to any audio project where you need 8 ohm impedance and 3W or less of power. We particularly like this speaker as it is small and enclosed for good audio volume and quality. It has a handy JST 2PH input cable to add audio to your displays and other projects (this connector is part of the JST-PH series which is ~2.0mm...

Reference: RBD-1934

MQ-136 Hydrogen Sulfide Gas Sensor

1 review

Dual signal output (analog output and TTL level output) The TTL output effective signal is low. Analog output 0 ~ 5V voltage, the higher the concentration the higher the voltage. Good sensitivity to hydrogen sulfide, liquefied gas, natural gas, city gas, and smoke. with long service life and reliable stability fast response recovery characteristics

Reference: RBD-2318

Sound Output Module Speaker Module Microphone Sensor Module Sound Sensor for Arduino

The Speaker module is composed of a power amplifier and a loudspeaker. Sound size can be adjusted by the potentiometer on the circuit board. Enter different frequencies, the speakers produce different tones. Can be carried out by for Arduino encoding and DIY their music box!Product data interfaceusing anti plug,the two sides of the interface are...

Reference: RBD-1966

Smart Gas Leak Detector Tuya Wifi Smart Natural Gas Alarm Sensor with LCD Display

1 review

Tuya Smart Wifi Wireless Natural Gas Leak Detector Gas Sensor Household Combustible LPG Gas Leak Alarm Detector With LCD Display

Reference: RBD-2470

3 Watt 8 Ohm Mini Speaker for Electronics Project with JST-PH2.0 Interface

3 Watt 8 Ohm Mini Speaker for Electronics Project with JST-PH2.0 Interface

Reference: RBD-2075

MQ-2 Gas Sensor Module

1 review

MQ-2 Smoke Gas Detector Sensor  ME084 Module for Arduino Operating Voltage:+5V Preheat Duration:20 s

Reference: RBD-2678

Surface Transducer - Large

Surface transducers give you the awesome power to turn almost any surface into a speaker. They're essentially just a speaker except instead of a cone, the coil is attached to a pad that conducts the vibration into whatever you press it against. Hook it up to an audio source and press it against the nearest table, wall or cardboard box. You can even put it...

Reference: RBD-2325

Brand: DFRobot

Gravity Analog Dissolved Oxygen Sensor / Meter Kit for Arduino

This is a dissolved oxygen sensor kit. A dissolved oxygen meter is used to measure the dissolved oxygen in water, to reflect the water quality. It is widely applied in many water quality applications, such as aquaculture, environment monitoring, natural science, etc.  There’s an old saying regarding keeping fish, “Good fish deserves good water”. Good...

Reference: RBD-2681

Digital Power Channel Amplifier Board 5V Bluetooth Speaker Audio CA6928

Bluetooth Speaker Audio Amplifier Module (Model: CA-6928) Introducing the CA-6928 digital power channel amplifier board, a compact and versatile solution for enhancing your audio experience. This speaker power amplifier module is designed to amplify sound from Bluetooth-enabled devices with ease. With its sleek and compact design measuring 24*14mm, this...

Reference: RBD-2497

DFRobot Fermion MEMS Carbon Monoxide CO Gas Detection Sensor (Breakout, 5-5000ppm)

Compact size, measuring only 13*13*2.5mm Low power consumption High sensitivity and rapid response recovery Advanced MEMS technology Gas detected: CO Sensitivity: R0(in air) / Rs(in 150ppm CO) ≥ 3 Lifespan: ≥5 years (in air)

Reference: RBD-2724

MAX4466 Electret Microphone Adjustable Amplifier Module

The MAX4466 Electret Microphone Module is a convenient and sensitive audio sensor solution designed for capturing sound waves and converting them into electrical signals. This module incorporates the MAX4466 electret condenser microphone and an integrated amplifier circuit, making it well-suited for applications requiring clear and amplified audio capture.

Reference: RBD-2508

ENS160 AHT21 Carbon Dioxide CO2 eCO2 TVOC Air Quality Temperature & Humidity Sensor

The ENS160 is a digital multi-gas sensor specifically designed for indoor air quality testing that optimizes the detection of a wide variety of gases and volatile organic compounds (VOCS), including toluene, hydrogen, ethanol, N02 and ozone. The air quality sensor is used in home and building automation, consumer products, electrical and air purification

Reference: RBD-2758

MAX9814 Microphone Amplifier Module

With this module you can easily measure sound with an analog pin on your Arduino or other microcontroller. The module has an automatic gain/amplification (ACG) of the microphone: The module amplifies sounds with a low volume more, and sounds with a higher volume less.

Reference: RBD-2667

MG811 (Co2) Carbon Dioxide Gas Sensor

MG811 (CO2) Carbon Dioxide Gas Sensor Metal Oxide Sensor Highly sensitive to CO2 Less sensitive to alcohol and CO Analog and digital output options Compatible with Arduino & Raspberry Pi Wide detecting scope

Reference: RBD-2729

SGP41 Air Quality Digital TVOC Detection Sensor

The SGP41 from Sensirion is an innovative VOC and NOx sensor engineered to serve as a digital smart switch and regulation unit in air treatment systems like air purifiers. Utilizing Sensirion's advanced Gas Index Algorithm, the sensor accurately processes two distinct signals, enabling automatic triggering of air treatment devices for the removal of...

Reference: RBD-2730

SGP40 Air Quality Digital TVOC Detection Sensor

The SGP40 is a digital gas sensor designed for easy integration into air purifiers or demand-controlled ventilation systems. Sensirion’s CMOSens® technology offers a complete, easy-to-use sensor system on a single chip featuring a digital I2C interface and a temperature-controlled micro hotplate, providing a humiditycompensated VOC based indoor air...

Reference: RBD-2793

Ultrasonic oxygen sensor OCS-3F

Cost-Effective Oxygen Detection Dual Detection Reliable Performance Versatile Outputs Compact & Easy to Use *Not a medical device*

Reference: RBD-2794

Ultrasonic oxygen sensor OCS-3F with LCD and Power Supply

All-in-one Oxygen Monitoring: This complete kit combines the OCS-3F ultrasonic sensor with an LCD display and power supply for convenient oxygen concentration and flow rate monitoring. Enhanced User Experience: The large LCD screen displays real-time oxygen concentration (21% - 95.6%), flow rate (up to 20 L/min), and room temperature for clear and easy...

Reference: RBD-2835

Explosive Gas Sensor Figaro TGS813-A00 Original

The sensor has high sensitivity to gases such as methane, propane, butane and hydrogen. The supply voltage is 24 V. Measuring range is up to 10,000 ppm.

Reference: RBD-2839

Explosive Combustible Gas Sensor TGS813

The TGS 813 Combustible Gas Sensor is a versatile and reliable solution for detecting a wide range of combustible gases. With its high sensitivity and long life, this sensor is ideal for applications such as domestic gas leak detectors, portable gas detectors, and more. This is generic TGS813 Manufactured in China