Reference: RBD-1873

DC 4-30V Voltmeter LED Display Panel

3 reviews

Operating Voltage: 4-30V VDC It is a 2-wire display. LED Color: Red Current Consumption: Less than 20mA, generally 5-15mA Accuracy: 0.1 V. Refresh Speed: Approx 300mS/time.

Reference: RBD-2430

6 Pin JST XH Cable Connector Female to Open - 2.54mm Pitch 20cm

This 6-wire cable has a length of slightly over 20cm and is equipped with JST-PH female 6-pin connectors at one ends. Such JST cables are frequently used with compact rechargeable battery packs, RC receivers and transmitters, miniature cameras, and other small electronic devices.

Reference: RBD-0904

Solderable Cable Red and Black Pair

6 reviews

Pair of wires for soldering with DC motors DC applications, breadboards, electronics, and robotics DIY projects Length: 120mm

Reference: RBD-1898

Mechanical Buzzer with LED Indicator AD16-22SM

2 reviews

Mechanical Buzzer LED Indicator AD16-22SM

Reference: RBD-2615

1 Meter Twisted Electrical Flexible Wire - Red Black

3 reviews

Flexible-SC(FR) cable with 1x0.4 rm gauge size, red & black color, and flame-retardant insulation material. Designed for electrical use in a variety of applications.

Reference: RBD-1656

6V,180rpm Micro DC Geared Motor with Back Shaft

1 review

L-Shaped DC Gearmotor Nominal Voltage: 6V No Load RPM: 180 Stall Current: 2.8A Stall Torque: 11.11 oz-in Shaft Diameter: 5.5 mm (Double-Flat) Comes with Back Shaft

Reference: RBD-1916

RS232 to TTL Serial Interface Module

IC Chip: MAX3232 Operating Voltage: 3.3-5.5V It can be used to program STC MCU, NXP MCU, Renesas MCU, STM32 MCU, N+-2EC MCU Pre-assembled compact size board Suitable for use with most microcontrollers Operates up to 250 kbit/s

Reference: RBD-2640

Male to Female Jumper Wires 20 Pcs 20cm

17 reviews

Connect components on breadboards and PCBs with ease. 20 pre-crimped jumper wires for versatile use. 20cm length for convenient connections. Male-to-female connector design for flexible connections. Colorful for easy identification and organization.

Reference: RBD-1686

Brand: RoboticsBD

4v 2000 RPM DC Motor

4 reviews

Operating Voltage: 3 to 6VDC Shaft Diameter: 2 mm (approx.) Shaft Length: 10mm(approx.) Weight; 15g(approx.)

Reference: RBD-2641

Female to Female Jumper Wires 20 Pcs 20cm

7 reviews

Connect components on breadboards and PCBs with ease. 20 pre-crimped jumper wires for versatile use. 20cm length for convenient connections. Female-to-female connector design for flexible connections. Colorful for easy identification and organization.

Reference: RBD-2648

Jumper Wire - 4 pin Ribbon Cable 10cm

Jumper Wire - 4 pin Ribbon Cable 10cm Medium quality 4-wire cable Length: 4" (10cm) Features a 4-pin tin-plated JST female connector with 0.1" spacing on both ends Versatile for various board-to-board connections Color may vary

Reference: RBD-2705

Micro USB Data Cable - 1 Meter

Micro USB data cable with an 8mm extended connector for phones and tablets with deep ports. Supports both charging and data transfer for versatile use. Tangle-free cable material ensures easy use and prevents knots. 1-meter length provides convenient reach for charging and data syncing.

Reference: RBD-0332

Jumper Wire - 3 pin Ribbon Cable 10cm

Jumper Wire - 3 pin Ribbon Cable 10cm Medium quality 3-wire cable Length: 4" (10cm) Features a 3-pin tin-plated JST female connector with 0.1" spacing on both ends Versatile for various board-to-board connections Color may vary

Reference: RBD-0333

Jumper Wire - 5 pin Ribbon Cable 10cm

Jumper Wire - 5 pin Ribbon Cable 10cm Medium quality 5-wire cable Length: 4" (10cm) Features a 5-pin tin-plated JST female connector with 0.1" spacing on both ends Versatile for various board-to-board connections Color may vary

Reference: RBD-0702

1 Channel 5V Relay Board Module

49 reviews

It has a relay status indicator led Power LED(Green), 8 relay status indicator LED(Red) Relay control interface by single-chip IO. Low-level suction close, high-level release. Easy to use, simple 3 line structure. Note: Relay might be different from the picture as per stock

Reference: RBD-0174

3pin JST-PH to Dupont Ribbon Cable

LDX Servo Connector Effortlessly bridge connections between JST-PH equipped sensors/modules and breadboards or other devices using Dupont connectors. This 3-pin jumper cable acts as an adapter, ensuring seamless communication between different components in your project. Compact and lightweight design for convenient integration.

Reference: RBD-1918

Miniature Vibrating Motor 6x15

1 review

Speed(RPM):19000 Motor diameter: 6mm Shaft diameter: 0.8mm Shaft length: 4mm Rated voltage: 1.5V-4.5V

Reference: RBD-1932

DC Motor Mobile Phone Vibrator Vibration Motor Alarm Module – Black

1 review

Rated voltage: 5 VDC. Port: Digital quantity. Fixed hole:3mm. Pitch:15mm. Drive: MOS tube high-level trigger, low-level cutoff. Compatible with UNO R3/ Mega2560.

Reference: RBD-2822

1 Meter Electrical Flexible Cable/ Wire - White

Flexible-SC(FR) cable with 1x0.4 rm gauge size, white color, and flame-retardant insulation material. Designed for electrical use in a variety of applications.

Reference: RBD-2926

NEMA Stepper Motor Cable with Dupont Connector Pure Copper – 1 Meter

NEMA Stepper Motor Cable with Dupont Connector Pure Copper – 1 MeterCompatible with Nema Motor

Reference: RBD-2927

Stepper Motor Cable XH2.54 4Pin to PH2.0 6Pin – 1.5 Meter

Stepper Motor Cable XH2.54 4Pin to PH2.0 6Pin – 1.5 Meter

Reference: RBD-2184

3v-9v Short Shaft 180 DC motor

3 reviews

Operating Voltage: 3 to 9VDC Shaft Diameter: 2 mm (approx.) Shaft Length: 5mm (approx.) Weight; 30g (approx.) 1 pcs 3v-9v Short Shaft 180 DC motor

Reference: RBD-2185

140 Dual Shaft DC motor

Operating Voltage: 3 VDC Shaft Diameter: 2 mm (approx.) Shaft Length: 8 mm front and rear(approx.) Weight; 19g (approx.)

Reference: RBD-2186

140 Single Shaft DC motor

1 review

Operating Voltage: 3 VDC Shaft Diameter: 2 mm (approx.) Shaft Length: 8 mm (approx.) Weight; 17g (approx.)

Reference: RBD-2187

4V-12V 370 DC powerful Dynamo motor and generator

1 review

Operating Voltage: 12 VDC Shaft Diameter: 2 mm (approx.) Shaft Length: 8 mm (approx.) Weight; 43g (approx.)

Reference: RBD-2188

Mini 300 Solar 3V to 6V DC motor

4 reviews

Operating Voltage: 5 VDC Shaft Diameter: 2 mm (approx.) Shaft Length: 7 mm (approx.) Weight; 30g (approx.)

Reference: RBD-2189

Vibration 3v-9v 130 Motor

Operating Voltage: 3 VDC Shaft Diameter: 2 mm (approx.) O-Shape Shaft Size 10 x 5mm/ (approx.) Weight; 19g (approx.)

Reference: RBD-2567

TJA1050 CAN Bus Transceiver Module

Interface between a CAN bus controller and the physical differential lines. Onboard TJA1050 CAN controller interface chip Chip commonly used pin has led, convenient connection to use Pin 5 v to the power supply PCB board size: 22 (mm) x11.5 (mm) Fully compatible with the ISO 11898 standard High speed (up to 1 Mbaud)Note : HW-021 on module working remains...

Reference: RBD-2190

3v-9v Short Shaft 130 DC motor

Operating Voltage: 1.5 to 3VDC Shaft Diameter: 2 mm (approx.) Shaft Length: 5mm (approx.) Weight; 22.5g (approx.)

Reference: RBD-2653

2.8V-5.5V to ±12V DC Conversion Step Up Power Supply Module

2.8V-5.5V to ±12V DC Conversion Step Up Power Supply  Module is straightforward. There is a 2.8 to 5.5 V DC input and the module outputs +12 V and -12 V DC dual power supply voltage with a current rating of a maximum 30 mA. Off course the current output is low but sometimes it suits in many situations where one is looking forward for a small boost...

Reference: RBD-2197

Carbon Brush DC Motor 1.5V to 3.7V High Speed

1 review

Model: 030-2927Motor size : 18.6mm*15.4mm*11.8mm (approx.)Motor shaft diameter: 1.5mm (approx.)Output shaft length: 8.5mm (approx.)

Reference: RBD-2450

Servo Motor Micro SG90 360 Degree Continuous Rotation

3 reviews

Micro size servo is perfect for driving micro-robot drive wheels. Continuous rotation servos are like regular hobby RC servos but modified to offer speed control instead of position control. They're essentially compact, affordable motors with integrated motor drivers. Add a wheel, and you've got a simple drive system for your robot, controllable...