Reference: RBD-2379

FREENOVE ESP32-S3-WROOM Camera Board Arduino Compatible

FREENOVE ESP32-S3-WROOM CAM Board (Compatible with Arduino IDE), Onboard Camera Wireless, Python C Code, Detailed Tutorial, Example Projects ESP32-S3-WROOM -> A powerful and small controller with onboard camera and wireless. 1GB Memory Card -> Can be inserted into the ESP32-S3 board to store files. (Included in this kit.) 2 tutorials with...

Reference: RBD-1037

SIM808 GPRS/GSM+GPS Shield

1 review

Quad-band 850/900/1800/1900MHz Inner MT3337 GPS receiver, -165dBm precision, control on a same serial port. Earphone/ microphone outputs on a card or external 32-ohm speaker + supports voice calls with an electret microphone. Sending and receiving SMS.

Reference: RBD-1412

TTGO T-Call ESP32 Wireless Module GPRS Antenna SIM Card SIM800L Board

8 reviews

Chipset :ESPRESSIF-ESP32 240MHz Xtensa® single-/dual-core 32-bit LX6 microprocessor FLASH: QSPI flash 4MB / PSRAM 8MB SRAM:520 kB SRAM Button: Reset USB to TTL: CP2104 Modular interface: UART,SPI,SDIO,I2C,PWM,TV PWM,I2S,IRGPIO On-board clock:40MHz crystal oscillator Working voltage:2.7V-3.6V Working current: About 70mA

Reference: RBD-0579

GPS GSM GPRS SIM808 Module (Arduino Compatible)

1 review

Quad-band 850/900/1800/1900MHz GPRS multi-slot class12 connectivity: max. 85.6kbps(down-load/up-load) GPRS mobile station class B Controlled by AT Command (3GPP TS 27.007, 27.005 and SIMCOM enhanced AT Commands) Supports charging control for Li-Ion battery Supports Real-Time Clock Integrated GPS/CNSS and supports A-GPS Low power consumption, 10mA in sleep...

Reference: RBD-1765

LILYGO TTGO LoRa32 915Mhz ESP32 OLED 0.96 Inch Wireless Module

LILYGO TTGO Model: 915MHZ CH9102F  T3_V1.6.1 LoRa32 V2.1_1.6 Version 915Mhz ESP32 LoRa OLED 0.96 Inch SD Card Bluetooth WIFI Wireless Module ESP-32 SMA

Reference: RBD-1604

Software Radio RTL2832U + R820T2 RTL-SDR ADS-B DVB-T DAB SDR Receiver

4 reviews

Supports Digital terrestrial video and radio program recording (records digital terrestrial TV on PC or Laptop).  The included Input Terrestrial Antenna will offer stable TV signal.   Supports Real Time digital video recording and broadcasting.   Supports Watching DVB-T digital TV and listen to DAB and FM radio. Full DVB-T bandwidth reception (at 6 / 7 /...

Reference: RBD-1806

LILYGO® TTGO T-Display ESP32 WiFi And Bluetooth Development Board

Based on ESP32 240MHz Xtensa dual-core 32-bit microprocessor Operating Voltage: 2.7V – 4.2V Working Current: 60mA Battery Charging Current: 500mA

Reference: RBD-1864

BBC Micro Bit Pocket Sized Single Board Computer 1.5

USB and Bluetooth Low energy connectivity. Compass and Accelerometer. 2 x user-assignable buttons. A 25 LED display. 21 pin edge connector.

Reference: RBD-1661

Wireless Communication KIT for Arduino UNO

All in one kit for Arduino Based Wireless and IoT NRF wireless Transceiver Module Sim900 Shield Sim800L RF Transmitter and Receiver

Reference: RBD-2108

WGP Mini UPS - Router + ONU Backup Output 5V, 9V, 12V

Multiple Outputs: 5V+9V+12V Constant DC output, long backup time up to 6 hours Intelligent circuit design with over-charging, over-discharging and short circuit protections Suitable for 95% DC/USB digital products, such as: modem, router, CCTV camera, mobile phone etc.

Reference: RBD-1965

LoraTap Tuya Smart ZigBee 3.0 Hub Wireless Multi Mode Mesh Gateway

LoraTap Tuya Smart ZigBee 3.0 Hub  Simple operation Easy to use Plug and play Using infrared sensor technology method Making your life more fashionable

Reference: RBD-1525

Sonoff TX Series WiFi Wall Switches T3 EU 3 Gang

2 reviews

Can control up to 3 device 220V Model : T3EU3C Remotely control devices through a phone Turn on/off devices with Amazon Alexa and Google Assistant Touch control buttons for convenient operation Set a particular time to turn on/off devices Customize one or groups of SONOFF devices to turn on/off with a simple tap Allow you to manage devices when there is...

Reference: RBD-1654

5 In 1 Portable CO2 Detector Air Quality Detector Intelligent Air Detector

3 reviews

5 In 1 Portable  CO2 Detector Air Quality Detector Intelligent Air Detector Temperature and Humidity Sensor Carbon Dioxide Monitor TVOC Formaldehyde Detection HCHO Detector  Color Black

Reference: RBD-2298

Tuya Low power waterproof lightsensor

Easy to install with adhesive sticker Detects light levels up to 30,000 LUX Sensitive to changes in light intensity Waterproof for outdoor use Linkage with other smart home devices for automation and control Battery-powered for convenient use

Reference: RBD-2366

Espressif ESP32-S3-DevKitC-1-N8R8

The ESP32-S3-DevKitC-1 Version 1.0 is an entry-level development board equipped with ESP32-S3-WROOM-1, ESP32-S3-WROOM-1U, or ESP32-S3-WROOM-2, a general-purpose Wi-Fi + Bluetooth® LE MCU module that integrates complete Wi-Fi and Bluetooth LE functions. Most of the I/O pins on the module are broken out to the pin headers on both sides of this board for...

Reference: RBD-2770

Brand: Waveshare

ESP32-S3 Development Board with 1.28inch Round Touch LCD

ESP32-S3 Development Board, with 1.28inch Round Touch LCD, Compact size, Accelerometer And Gyroscope SensorSKU: 25098Part Number: ESP32-S3-Touch-LCD-1.28Brand: Waveshare

Reference: RBD-2771

Brand: Waveshare

RP2040 Microcontroller Development Board with 1.28inch Round Touch LCD

RP2040 Microcontroller Development Board, with 1.28inch Round Touch LCD, Compact size, Accelerometer And Gyroscope Sensor

Reference: RBD-2772

E83-2G4M03S-TB Bluetooth Mesh Module Test Suite

Used to test and develop Chengdu Ebyte E83-2G4M03S wireless module. E83-2G4M03S-TB has been pre-soldered to E83-2G4M03S. Please refer to the module manual for detailed usage. All IO ports of the E83-2G4M03S wireless module have been led out. The module is equipped with CH340X serial port chip, which can directly carry out serial communication development....

Reference: RBD-2773

ESPRESSIF ESP32-C6-DEVKITC-1-V1.2 N8

ESP32-C6-WROOM-1 and ESP32-C6-WROOM-1U are general-purpose modules supporting Wi-Fi 6 in 2.4 GHz band, Bluetooth 5, and IEEE 802.15.4 (Zigbee 3.0 and Thread 1.3). They are built around the ESP32-C6 chip, and comes with a 8 MB SPI flash. ESP32-C6-WROOM-1 uses on-board PCB antenna, whereas ESP32-C6-WROOM-1U uses external antenna connector. For more...

Reference: RBD-0568

Brand: Raspberry Pi Official

Raspberry Pi Camera Module V2 - 8 Megapixel,1080p

12 reviews

Fixed focus lens on-board Improved resolution – 8-Megapixel native resolution sensor-capable of 3280 x 2464 pixel static images Supports 1080p30, 720p60 and 640x480p90 video Size 25mm x 23mm x 9mm Weight just over 3g Connects to the Raspberry Pi board via a short ribbon cable (supplied) Camera v2 is supported in the latest version of Raspbian, Raspberry...

Reference: RBD-2674

DSServo DS3218 20KG Digital Metal Servo with Metal Servo Horn 270 Degree

Brand: DSSERVO Model: DS3218MG Stall Torque (5V): 19 kg/cm (263.8 oz/in) Stall Torque (6.8V): 21.5 kg/cm (298.5 oz/in) Dead Band: 3μs Speed: 0.16 sec/60°(5V) / 0.14 sec/60°(6.8V) Operating Voltage: 4.8 ~ 6.8 DC Volts Weight: 60 g (2.12 oz) Motor Type: DC Motor Gear Type: Copper & Aluminum270 Degree Angle

Reference: RBD-2620

Micro F3 Brushed Flight Control with Built-in RX Option

Compact and lightweight F3 flight controller for brushed drones. Built-in receiver options for various brands (FlySky, Frsky, etc.). Integrated 4-in-1 brushed ESCs for simplified wiring. Supports CleanFlight and BetaFlight firmware for customization. Plug-and-play compatible with MX VTX 25MW module and camera.

Reference: RBD-0947

Raspberry Pi HDMI Touch Display 5 Inch 800x480

4 reviews

5-inch LCD display. 800×480 screen resolution. 170º viewing angle. HDMI interface for displaying. Supports popular game consoles like Microsoft XBOX360, Sony PS4, and Nintendo Switch. Raspberry Pi, Windows, Jetson Nano, BB Black, Banana Pi device & system support.

Reference: RBD-1626

Brand: RoboticsBD

Arduino Advance Learning Kit

40 reviews

Great for Starting with Arduino Programming A variety of components are included in this pack to try out different projects. The kit comes with quality components All-in-one kit, a great starter kit for learning to code. All Basis component to start is covered in kit You can create 15 different projects from this kit

Reference: RBD-2664

Brand: ST Microelectronics

STM32 NUCLEO-G491RE - STM32G491RE ARM Cortex M4 Development Board

STM32 Nucleo module with 32-bit STM32G491RE microcontroller equipped with Arm Cortex-M4 core clocked at 170 MHz, 512 kB of Flash memory and 16 kB of SRAM. As the board belongs to Nucleo-64 family, it is compatible with mbed platform, has connectors to connect Arduino Uno adapted overlays and has ST morpho pins which give access to all GPIO pins of the...

Reference: RBD-1316

ABS Filament 1.75mm Plastic For 3D Printer 1kg/Roll

4 reviews

Tougher and stronger Less warping (about 0.4% compared to over 8% in regular ABS) Prints smoother & smoother printed objects Better scratch, heat and oil resistance Can be polished using acetone Can be easily colored.

Reference: 1392

PETG Filament Plastic For 3D Printer 1.75mm1KG/Roll

2 reviews

PETG Filament Plastic For 3D Printer 1.75mm1KG/Roll Compatible with Anycubic, Creality. Temperature: 205-230 °C Bed Temperature: 60-80 °C

Reference: RBD-2667

MG811 (Co2) Carbon Dioxide Gas Sensor

MG811 (CO2) Carbon Dioxide Gas Sensor Metal Oxide Sensor Highly sensitive to CO2 Less sensitive to alcohol and CO Analog and digital output options Compatible with Arduino & Raspberry Pi Wide detecting scope

Reference: RBD-2619

80FPV Quadcopter Tiny Whoop Drone Kit

Compact and lightweight (36.6g) micro FPV quadcopterIndoor and Outdoor flying.Stable and precise controlDurable frame design with easy motor replacement (connectors pre-soldered).

Reference: RBD-1972

Brand: DFRobot

Gravity: Analog AC Current Sensor (20A)

Brand Gravity Analog AC Current Sensor 20A AC Current Signal Conversion Module Open Type AC Transformer Probe Included Non-contact Measurement

Reference: RBD-2326

Brand: DFRobot

Gravity Analog Heart Rate Monitor Sensor (ECG) for Arduino

The DFRobot Heart Rate Monitor Sensor is used to measure the electrical activity of the heart. This electrical activity can be charted as an ECG and output as an analog reading. An ECG signal can be extremely noisy so we have included an AD8232 chip which will generate a clear signal from the PR and QT Intervals. Using the Arduino IDE "Serial Plotter"...