Reference: RBD-0494

Actiontec Genuine 12V 2A AC Adapter

13 reviews

Input Voltage (V): 100 ~ 280 VAC @50 ~ 60Hz. Input current (mA): 100. Output Power: 12V 2A. Input Plug: 2-Pin USA type. Output Plug: 5.5mm DC plug. RoboticsBD Model: STD-120200

Reference: RBD-0110

Raspberry Pi Power Adapter Micro USB

13 reviews

রাস্পবেরি পাই এর জন্য একটি স্ট্যাবল পাওয়ার সাপ্লাই এর প্রয়োজনীয়তা অনেক।  আমরা অনেক পাওয়ার সাপ্লাই টেস্ট করে এর এই পাওয়ার সাপ্লাইটির ক্যাপাসিটি সন্তোষজনক পেয়েছি। যদিও মেনশন করা  5V,3A. আমরা আমাদের টেস্ট এ  5V, 1.5Amp+ কনস্ট্যান্ট কারেন্ট পেয়েছি। যদি আপনার খুব বেশি পেরিফেরাল না দরকার হয় তবে এটি ব্যবহার করতে পারেন।  এছাড়া আমাদের কাছে অরজিনাল রাস্পবেরি পাই এর...

Reference: RBD-0159

LCD Keypad Shield for Arduino

5 reviews

Provides a user-friendly interface that allows users to go through the menu, make selections etc. It consists of a 1602 white character blue backlight LCD. The keypad consists of 6 keys select, up, right, down, left and reset. To save the digital IO pins, the keypad interface only uses one ADC channel. The key value is read out through a 5 stage voltage...

Reference: RBD-0623

DC-DC 9V/12V/24V to 5V USB Step Down Power Module 2A

Input voltage range: 6-26V Output voltage: 5.2V (consider the charge line loss, the output is 5.2V or so, the load side is about 5V) Output current: 3A (in the absence of a heat sink device, the stable output current is 2A) Two output Port can charge two devices simultaneously. RoboticsBD

Reference: RBD-0696

USB DC 5V to DC 12V Step up Cable Module Converter

5 reviews

Voltage : Input through (USB) DC 5V Output via (DC Round Pin) : DC 12V Color: BLACK Input / Output Current: Maximum Input 0.6 Easier for installation save time and money Easy to use.

Reference: RBD-0282

XBee USB Adapter

Specifications: - 3.3V and 5V dual power output- 3.3V and 5V IO compatible- USB2.0 protocol- BitBang mode ready- Easily connected to PC via mini USB cable- Support XBee-setting with software X-CTU

Reference: RBD-0353

0.96" Inch I2C OLED Display Yellow

9 reviews

Driver IC: SSD1306 Support wide voltage: 3.3V-5V DC Communication: IIC Working temperature: -30-80 degrees. RoboticsBD

Reference: RBD-0699

1.8" inch TFT LCD Display module ST7735S 128x160

2 reviews

Display Size: 1.8″ Driver IC: ST7735 Input Voltage (V): 3.3 to 5 Pixel Resolution: 128 x 160 Interface Type: SPI

Reference: RBD-1064

1.3 Inch I2C OLED Display Module 4pin- Blue

5 reviews

Size: 1.3 inch Resolution: 128 x 64 Controlling Chip: SSH1106 Driving Voltage: 3.3-5V Operating Temperature: -40~70 celsius Interface Type: IIC Light Color: Blue If you want to purchase White color 1.3 inch OLED display module click here

Reference: RBD-1309

Raspberry Pi Power Adapter with Switch Micro USB

11 reviews

Input Voltage (V): 100 ~ 280 VAC @50 ~ 60Hz. Input current (mA): 100. Output Power: 5V 3A. Load regulation (%): ±5. Input Plug: 2-Pin EU type. Output Plug: Micro USB Plug. Compatible with: Raspberry Pi B+, 2, 2B, 2B+,3 ,3B+, Zero, Zero W. It has a switch so you can easily power off the device without having to unplug it right from the socket.

Reference: RBD-1559

DC 12V Charging Step Up Booster Module for 18650 Lithium Battery UPS Voltage Converter Protection

1 review

Support charging and discharging at the same time Large current Small size High efficiency Support short circuit protection

Reference: RBD-1560

DC 9V Charging Step Up Booster Module for 18650 Lithium Battery UPS Voltage Converter Protection

Support charging and discharging at the same time Large current Small size High efficiency Support short circuit protection

Reference: RBD-1564

Solar Charger Controller Adjustable Step-Up / Down Automatic Power Module

2 reviews

High voltage resistant terminal. Support solar charging. Support undervoltage protection. Support short circuit protection.

Reference: RBD-0914

MAX7219 4 Channel Dot Matrix Display Panel

7 reviews

Driver Chip: MAX7219 Input Voltage: 3.7 to 5.3 V Input Current: 320 mA Display Dimensions: 32x32x6 (LxWxH) mm PCB Dimensions: 128×32 (LxW) mm

Reference: RBD-1328

0.96" Inch I2C OLED Display White

21 reviews

Size: 0.96 inch Resolution: 128 x 64 Controlling Chip: SSH1106 Display Area: 21.74 x 10.86mm Driving Voltage: 3.3-5V Operating Temperature: -40~70 celsius Interface Type: IIC Light Color: White

Reference: RBD-1332

I2C Graphic 128x64 LCD Adapter

6 reviews

Adapter: Graphic 128x64 Communication: i2c 

Reference: RBD-1673

IP5328P Charging Treasure Two-way Fast Charging Module Power Bank Controller

4 reviews

Supports Qualcomm Quick Charge 3.0 fast charging protocol Has both "USB type C" and "Micro USB" port for charging power bank battery Power bank battery can be fast-charged (up to 15 watts) with QC 3.0 supported fast chargers  Two "USB A" ports with maximum 18-watt power delivery from the power bank  Power bank battery level indicator LEDs and power on/off...

Reference: RBD-1690

Raspberry Pi 4 Power Supply 5V 3A USB Type C

5 reviews

ON/OFF switch button on the power adapter.  Very convenient for use. 5V 3A standard power supply for Raspberry Pi 4 Model B. There is CE certification for the power adapter. Best Adapter for Raspberry Pi 4

Reference: RBD-1697

Brand: DFRobot

Breadboard Power Supply 5V/3.3V

Takes a 6-12V input voltage. Outputs a selectable 5V or 3.3V regulated voltage. All headers are 0.1" pitch for simple insertion into a breadboard. Powered from 6-12 DC2.1 power jack or from USB power.   The maximum current it can provide is 500mA. 

Reference: RBD-1702

Raspberry Pi 4 Power Adapter Type C

1 review

Very convenient for use. 5V 1.5A standard power supply for Raspberry Pi 4 Model B. There is CE certification for the power adapter. Best Adapter for Raspberry Pi 4

Reference: RBD-1643

16x2 Black on White Character LCD with Backlight

For Standard LCD 16x2 with Male Header. Press here For Standard LCD 16x2 with Female Header. Press here For Standard LCD 16x2 with I2C adapter board soldered. Press here. For Standard LCD 16x2 with White Background. Press here. For Standard LCD 16x2 with Blue Background. Press here.

Reference: RBD-1764

Voltage Regulator Buck Converter Max 5-40V to 1.2-36V Step Down

4 reviews

High Power DC-DC Step Down Module Input Voltage: 5-40V DC Output Voltage: 1.2-36V DC Efficiency: 95% Maximum Power: 200W

Reference: RBD-1963

Nokia 5110 LCD Display Module Red

2 reviews

Operating supply voltage: 5 to 7V Data interface level: 2.7-5V. Resolution: 84 x 48 pixel Backlight: Blue.

Reference: RBD-2050

1.3 Inch SPI OLED Display Module 7pin Blue

Driver IC: SH1106 Resolution: 128 x 64 Visual Angle: >160° Input Voltage: 3.3V  Pixel Color: Blue If you want to purchase White color 1.3 inch OLED display module click here

Reference: RBD-2051

1.3 Inch SPI OLED Display Module 7pin White

Driver IC: SH1106 Resolution: 128 x 64 Visual Angle: >160° Input Voltage: 3.3V Pixel Color: White If you want to purchase Blue color 1.3 inch OLED display module click here

Reference: RBD-2052

1.3 Inch I2C OLED Display Module 4pin- White

Size: 1.3 inch Resolution: 128 x 64 Controlling Chip: SSH1106 Driving Voltage: 3.3-5V Operating Temperature: -40~70 celsius Interface Type: IIC Light Color: White If you want to purchase Blue color 1.3 inch OLED display module click here

Reference: RBD-1853

Ktec Adapter DC 5V 2A 2.1mm Barrel Jack

2 reviews

Suitable for Arduino, DIY & Hobby Kits, and 5V Home Appliances. Rated Input AC Voltage 100v-240v It comes with a 1 meter long 24 AWG cable Stabilized DC Output with Low Ripples & Interference Short Circuit & Overload Protection High Efficiency & Low Energy Consumption RoHS and BIS compliance Approved.

Reference: RBD-1874

High quality AC/DC 9V 2A Switching Power Supply Adapter 2.1mm Barrel Jack

5 reviews

Suitable for DIY & Hobby Kits, Routers, and Home Appliances. Rated Input AC Voltage 100v-240v It comes with a 1 meter long 24 AWG cable Stabilized DC Output with Low Ripples & Interference Short Circuit & Overload Protection High Efficiency & Low Energy Consumption RoHS and BIS compliance Approved.

Reference: RBD-1879

Genuine Motorola AC Power Supply Adapter 12V 2A

Input Voltage (V): 100 ~ 280 VAC @50 ~ 60Hz. Input current (mA): 100. Output Power: 12V 2A. Input Plug: 2-Pin USA type. Output Plug: 5.5mm DC plug. RoboticsBD Model: NBSB24120200VU Brand: Motorola

Reference: RBD-1915

LM2577 3A DC-DC Step UP LED Voltmeter 3-34 to 4-35V Adjustable Boost Converter Module

3 reviews

Input voltage range : 3-34V DC Output voltage range : 4-35v DC adjustable Output current:3A Voltmeter range:0 to 40V,error +-0.1v Multiple output regulator. One button to switch input and output voltage display. Power-down memory function. Press the button for 3 seconds can turn OFF/ON the LED display.

Reference: RBD-2468

IPS LCD 1.3″ 240×240 RGB Display ST7789

Full color display with wide viewing angle.  This is version without CS pin.

Reference: RBD-1930

AC-DC Adapter Genuine 12V 6A Power Adapter

5 reviews

Suitable for DIY & Hobby Kits, Routers, LED Strip Driver, and Home Appliances. Rated Input AC Voltage 100v-240v It comes with a 1 meter long 24 AWG cable Stabilized DC Output with Low Ripples & Interference Short Circuit & Overload Protection High Efficiency & Low Energy Consumption RoHS and BIS compliance Approved. Note: Adapter only....