Arduino Ethernet Shield Basic (Retired)

Reference: RBD-327

Tiger Lipo Battery 4500mah 3S 30C (Retired)

(Retired) Product information Item :Tiger Li-po 3SCapacity: 4500 mAhVoltage: 11.1 VContinuous Discharge C-rate:30CMax charging rate: 5C Application1)   Quadcopter, Large 4-axis ,6-axis and multi-axis aircraft 2). Align famous 3D helicopter RC Helicopter ,Trex 450/500/600/7003). Indoor Helis, Indoor UFO ,3D Airplane Aerobatics4). Mico Slow Flyers, Park...

Reference: RBD-811

Raspberry Pi 3 Model B+ Complete Set (Made in UK) Pack 2(Retired)

(Retired) রাস্পবেরি পাই ৩ মডেল বি প্লাস পৃথিবীর অন্যতম ক্রেডিট কার্ড সাইজের শক্তিশালী কম্পিউটার। এটি ফুল এইচডি ভিডিও প্লেব্যাক সমর্থন করে। এটি মূলত লিনাক্স অপারেটিং সিস্টেম সাপোর্ট করে। অনেক ধরনের প্রোগ্রাম ডেভলপ করা যায়।   কি কি থাকছে ? ১ টি রাস্পবেরি পাই ৩ মডেল বি প্লাস (মেড ইন UK) ১ টি রাস্পবেরি কেস রাস্পবেরি পাই এর হিট সিংক  রাস্পবেরি পাই এর...

Reference: RBD-701

Tolsen Cordless Screwdriver (Set)(Retired)

(Retired) Cordless Screwdriver With Set

Reference: RBD-82

Carbon Monoxide Sensor - MQ-7 (Retired)

(Retired) Description: This is a simple-to-use Carbon Monoxide (CO)sensor, suitable for sensing CO concentrations in the air. The MQ-7 can detect CO-gas concentrations anywhere from 20 to 2000ppm.

Reference: RBD-42

Mini RC Quadcopter (Retired)

(Retired) Description:Item Name: Mini RoboticsBD RC QuadcopterMotor (x4): Coreless MotorFrequency: 2.4GHzBattery: 3.7V 240mAhFlight time: above 9 minutesCharging time:30 minutesFeatures:Latest 6-axis flight control system with adjustable gyro sensitivityPermits super stable flightLightweight airframe with nice durability

Reference: RBD-186

WiDo - Arduino WIFI IoT Node (Retired)

(Retired) WiDo - Arduino WIFI IoT(Internet Of Things) Node (Arduino Compatible) Wido is an Arduino compatible WIFI IoT Node development board, which integrates with WG1300 WIFI solution. The microcontroller of Wido is ATMEL ATmega32U4.

Reference: RBD-64

pcDuino Lite - Dev Board (Retired)

(Retired) Description: As the field of embedded electronics gets more advanced, hobbyists and professionals are both in need of smaller and more powerful computers. We’ve been looking for awhile and now we’ve found one that we really like, not only because it’s small and fast but because it’s also Arduino shield compatible!

Reference: RBD-303

High Torque Gear-Box Electric Motor 12V DC 300 RPM (Retired)

(Retired)   Description: Voltage/current: 12V DC.Horse Power Cont.: 5W RPM: 300.Length of Motor (including spindle): 76.1mmDiameter: 37mm Shaft length: 15mm Shaft diameter: 6mm Weight: 185g

Reference: RBD-255

Wild Scorpion 3500mAh 3S 11.1v 30C Lipo Battery (Retired)

(Retired)   Wild Scorpion 3500mAh 3S 11.1v 30C Lipo Battery 3S 11.1V 3500mAh 30C Dimensions (mm): 19x43x137 Weight (grams): 286

Reference: RBD-254

Arduino GSM / GPRS SIM900 Shield (Retired)

(Retired) Details: The GPRS Shield is based on SIM900  module from SIMCOM and compatible with  Arduino and its clones. The GPRS Shield  provides you a way to communicate using  the GSM cell phone network.

Reference: RBD-714

Powerful High Torque DC Gear Motor 12V 100RPM 37GB(Retired)

(Retired) Powerful High Torque DC Gear Motor with Encoder Voltage: 12V DC RPM:100RPM Diameter: 37mm Shaft length: 15mm  Length (excl. shaft): View Photos Shaft diameter: 6mm White and red cord : (+)(-) power cord Yellow and blue cord: For Encoder

Reference: RBD-171

XBee Pro 63mW PCB Antenna - Series 2B (ZigBee Mesh) (Retired)

(Retired) Description: This is the very popular 2.4GHz XBee module from Digi. These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and...

Reference: RBD-256

Wild Scorpion 11.1v 3S 1800mAh 30C Lipo Battery (Retired)

(Retired) Wild Scorpion 11.1v 3S 1800mAh 30C Lipo Battery Dimensions (mm): 21x34x110Weight (grams): 156

Reference: RBD-112

Brand: SparkFun Electronics

Venus GPS with SMA Connector (Retired)

(Retired) Features: Up to 20Hz update rate -148dBm cold start sensitivity -165dBm tracking sensitivity 29 second cold start TTFF 3.5 second TTFF with AGPS 1 second hot start 2.5m accuracy Multipath detection and suppression Jamming detection and mitigation SBAS (WAAS / EGNOS) support 67mW full power navigation Works directly with active or passive antenna

Reference: RBD-213

FPV Camera 720p FishEye Lens Wide Angle 165° (Retired)

(Retired)   FPV Camera 720p FishEye Lens Wide Angle This Camera Can be used with this Boscam FPV 5.8Ghz AV Transmitter and Receiver for FPV Purpose

Reference: RBD-223

Full Metal 2-Axis Brushless Gimbal (Retired)

(Retired)

Reference: RBD-310

QX-Motor 64mm 5 Blades Propeller (EDF) (Retired)

(Retired) Description:Brand Name: QX-MotorItem Name: 5 blade fanMaterial: PlasticShaft: 4.0mmWeight: About 10gPackage Included:1x QX-Motor 64mm 5 blades fan

Reference: RBD-580

RC04A Chassis Kit Double Deck (12V, 300RPM)(Retired)

(Retired)RC04A Chassis Kit Double Deck with Motor Set Item Included:  Pololu 5" Robot Chassis RRC04A Base 5" Robot Top N20 Gear Motor (12V, 300 RPM) Caster Ball

Reference: RBD-167

RFID Reader ID-20LA (125 kHz) (Retired)

(Retired) Description: RFID (radio-frequency identification) is the wireless non-contact use of radio-frequency electromagnetic fields, for the purposes of identifying and tracking tags attached to objects. This is the ID-20LA, a very simple to use RFID reader module from ID Innovations. With a built in antenna, the only holdup is the 2mm pin spacing....

Reference: RBD-211

Leap Motion Controller (Retired)

(Retired) The Leap Motion Controller tracks both hands and all 10 fingers with pinpoint precision and incredible  speed. Setup is easy, just plug into your PC or Mac and launch Airspace, your home for Leap Motion apps. Play, create, and explore in a whole new way!In Airspace, the Leap Motion App store,

Reference: RBD-273

Brand: Waveshare

Arduino WIFI Shield EMW3162 (Retired)

(Retired) A1rduino WIFI Shield EMW3162

Reference: RBD-134

pcDuino3 - Dev Board (Retired)

(Retired) Description: The pcDuino3 is a high performance, cost effective mini PC platform that runs full-featured operating systems such as Ubuntu and Android. In addition to running Linux and Android, the pcDuino3 has support for programming languages such as C, C++, Java, Python, Arduino, and more. You can even use your favorite Arduino shields for...

Reference: RBD-250

Mystery A212 Brushless Outrunner 930kv (Retired)

(Retired)

Reference: RBD-249

Brand: SparkFun Electronics

SparkFun ToF Range Finder Sensor - VL6180 (Retired)

(Retired) Description: This is the SparkFun “Time-of-Flight”  Range Finder, a sensor board for the VL6180  distance sensor. Unlike most distance sensors  that rely on reflected light intensity or reflected  angles to determine range, the VL6180 uses a  precise clock to measure the time it takes light  to bounce back from a surface.

Reference: RBD-65

pcDuino - WiFi Dongle (Retired)

(Retired) Description: Want to free your pcDuino from the oppression of wired networking? This USB Wifi dongle has been tested to work with the pcDuino, simply plug it into the USB port and you're ready to connect to a nearby wireless network!

Reference: RBD-283

Arduino 3G+Wifi+Ethernet Shield (Retired)

(Retired) Iduino Yun Shield Compatible with Arduino Leonardo, Uno, Duemilanove, Diecimila and Mega Arduino 3G+Wifi+Ethernet Shield Robotics Bangladesh 3g+ Wifi+ Ethernet + USB+ Openwrt (Linux) Geeetech Latest Iduino Yun Shield board Linux WiFi 3G Ethernet USB for Arduino http://www.geeetech.com/wiki/index.php/Iduino_Yun_Shield

Reference: RBD-179

Brand: SparkFun Electronics

EL Wire - Starter Kit Retail (Retired)

(Retired)

Reference: RBD-190

Brand: DFRobot

Relay Shield for Arduino V2.1 with Xbee Socket (Retired)

(Retired)

Reference: RBD-1113

Brand: Anycubic

Anycubic I3 Mega 3D Printer(Retired)

(Retired) "The Future is Now" 3D প্রিন্টার এখন পাওয়া যাচ্ছে রোবোটিক্স বাংলাদেশে। 3D প্রিন্টার কিনুন, আপনার পছন্দের 3D ডিজাইন তৈরি করুন অথবা ইন্টারনেট থেকে ডাউনলোড করুন। প্রিন্ট দিন মুহূর্তেই। যেকোনো জিনিস যেকোনো সময়ে। খুব সহজেই ভিডিও দেখে 3D প্রিন্টার এসেমব্লি করতে পারবেন।  The Anycubic i3 Mega is a solid, metal-framed 3D printer that comes mostly...

Reference: RBD-581

Mini Round Double Deck Chassis Kit 2WD(Retired)

(Retired)