Reference: 280

Mini Breadboard

Description: This black Mini Breadboard is a great way to prototype your small projects! With 170 tie points there’s just enough room to build and test simple circuits; They’re also great for breaking out DIP package ICs to jumper wires! If you run out of room, no worries, these mini breadboards can be snapped together to form larger stretches of board...

Reference: 910

Uni-T UT33B+ Digital Multimeter

UT33B+ Palm Size Multimeter

Reference: 1385

Uni-T UTi165H Professional Thermal Imager

UTi165H Thermal Imager1. 2.8" TFT screen 2. Infrared resolution: 160×120 3. Frame frequency: 9Hz 4. Range of temperature measurement: 30˚C~45˚C 5. Accuracy: ±0.5˚C 6. Photographed function and SD card storage 7. PC software analysis 8. Point temperature measurement 9. Type-C USB interface for lithium battery charging 10. 1/4" tripod mounting hole...

Reference: 909

Victor VC830L Digital Multimeter

VICTOR VC830L Handheld 3 1/2 Digital Multimeter 600V AC DC Ohm VOLT Meter

Reference: 1365

Uni-T UTi85H+ Professional Thermal Imager

Uni-T UTI85h+ Alarm Buzzer Thermal Imagining Infrared Camera Thermal Imagers UTi85H+ Thermal Imager 1. High/low temperatures measurement 2. Adjustable emissivity 3. Storage card 4. Alarm buzzer 5. High temperature alarm 6. Flashlight 7. Type-C USB port for charging and data transmissionFeaturesHI/LO Temperature Alarm:  Central point temperature...

Reference: 720

AMG8833 IR Thermal Camera Breakout (Adafruit Compatible)

Add heat-vision to your project and with an AMG8833 Grid-EYE Breakout! This sensor from Panasonic is an 8x8 array of IR thermal sensors. When connected to your microcontroller (or raspberry Pi) it will return an array of 64 individual infrared temperature readings over I2C. It's like those fancy thermal cameras, but compact and simple enough for easy...

Reference: 1236

UNI-T UT383 Light Lux Meter

UNI-T UT383 Light Meter 200,000 LUX Digital Luxmeter

Reference: 421

Tool Kit - Screwdriver and Bit Set

Description: There’s nothing worse than getting ready for a good hack and then realizing that you can’t even get the box open because you don’t have the right screwdriver. Sure, we all have a few Phillips-head drivers and maybe a few slotted drivers but what about Torx, Hex Socket or Tri-Wing? This kit has them all.

Reference: 1237

UNI-T Wind Speed Meter UT363BT

UT363/UT363BT are mini wind speed and temperature meters. UT363 and UT363BTcan measure wind speeds up to 30m/s. 

Reference: 706

UNI-T A12T Temperature Humidity Meter

A12T measures real-time temperature and humidity and displays readings on a large screen. It can be used in both indoor and outdoor conditions. A12T has an additional external sensor probe for measuring temperatures of two locations with alarm clock, 12/24 hour modes and comfort rating display based on the combination of temperature and humidity. 

Reference: 1154

USB Digital Microscope 1000X

USB Digital Microscope 40X to 1000X, 8 LED Magnification Endoscope Camera with Metal Stand, Compatible for Android Windows 7 8 10 Linux & Mac.Applications:Textile industrial for textile inspectionPrinting inspectionIndustrial inspection: PCB, Precision machineryEducational purposeHair examinationSkin examinationMicrobiological...

Reference: 1576

XR2206 High Precision Function Generator Signal Generator Module DIY Kit

XR2206 High Precision Function Generator Signal Generator Module DIY Kit, Adjustable Frequency Signal Waveform Generator Sine Wave, Triangular Wave, and Squarewave,1HZ-1MHZ (KIT)

Reference: 907

UNI-T UT603 LCR meter

UNI-T UT603 LCR meter

Reference: 188

USB Saleae Compatible 24MHz 8Channel Logic Analyzer Latest Support 1.1.15

USB Saleae Compatible 24MHz 8Channel Logic Analyzer Latest Support 1.1.15

Reference: 1562

DP50V5A Constant Voltage Current Programmable Power Supply

2. Technical parameters Input voltage range:  6.00-55.00V                                   Output voltage range:  0V-50.00V Output current: 0-5.000A                                                Output power range: 00.00-250.0W    Product Weight: 78g                                                        Product Dimension: 79*43*48(mm) (L*W*H) Open...

Reference: 1518

Servo Tester Gear Test CCPM Consistency Master Checker

Operating Voltage: DC 4.2-6.0v Output: Less than 15mA (5.0) Output Signal: 1.5ms ± 0.5ms Simultaneous Servo Test: 3 LED Mode Indicators: Manual / Neutral / Auto Testing Capabilities: Response Time / Neutral Position / Max Angles Size: 46mm x 32mm x 17mm (Approx.) Weight: 8g

Reference: 383

ADS1115 16 Bit I2C 4 channel ADC Module

ADS1115 16 Bit I2C 4 channel ADC Module

Reference: 319

K Type Thermocouple Sensor Probe for Temperature Controller

Description:  Type K Type.  Mounting thread: M6  Temperature Range:0-600°C.  Thread Diameter:6mm / 0.23".  Internal Insulation:Fibreglass.  External Shielding:Metal Shield.  Total Length:1M / 39".  Fork Terminal Spacing: 3.5mm / 0.13".  Color: As Picture Shown.  10mm thread sensor for accurate measurement.

Reference: 165

USB Logic Analyzer

Description: This is a powerful logic analyzer in a very small anodized aluminum package from Saleae Logic. We absolutely love the simplistic, sleek design with light-weight software and a high-quality finish. Who needs 50+ connections when you’re troubleshooting I2C? With USB connectivity, you can analyze up to 8 digital waveforms and timing information...

Reference: 1323

Multifunctional Tester LCR-T7

Features:- 160x128 TFT display  - Multi function key.  - Transistor test area. - Zener Diode test area.  - IR receiver window.  - Micro USB Charging Interface.  - Charge indicator LED.

Reference: 709

UT890D+ Digital Multimeter

UT890D+ Digital Multimeter

Reference: 180

Brand: SparkFun Electronics

Makey Makey Kit

Description: This is the same product as the Makey Makey Standard Kit. The difference is this version comes in fancy clamshell packaging meant for our distributors that need it. Regular customers are welcome to order, but we want to limit the amount of extra packaging finding its way into the trash heap.

Reference: 1528

1-8S Lipo Battery Voltage Tester

Managing your LiPo battery is a must. If you let your battery get to low you can diminish the capacity of your battery or even render it unusable. That's where our 1-8S LiPo Battery Voltage Tester/Monitor comes in.First, this unit can be used to test your battery's voltage. It will display the total voltage of your battery, then cycle through and...

Reference: 1177

4-20mA Signal Generator Current Loop Simulator Tester

This signal generator can use 4-20mA to generate voltage and control the current in the circuit. Accuracy up to 0.01; Liquid crystal display; Rotary encoder adjustment ; Two connection terminals are non polarity. Output range can be set; 4-20mA (device control) / -21mA (signal debugging) Display mode can be set, it is convenient for you to see the value...

Reference: 1152

Goot Soldering Iron 60w KS-60R (Normal Quality)

Goot Soldering Iron 60w KS-60R (Normal Quality)

Reference: 284

5.8GHz Circular Polarized Mushroom Antenna RP-SMA Set Tx/Rx for FPV Multicopter

Specifications:- Gain: 2.0dBi-2.5dBi- Standing-wave ratio (SWR): <1.5- Directivity: Omni-directional- Center frequency: 5.8Ghz- Connector: RP-SMA- Diameter of connector: 7.67mm- Length:Transmitter antenna:71mm- Receiver antenna:91mm- Net weight: 12g（Tx/Rx）- Package weight:69 g

Reference: 1554

Oscilloscope UNI-T UTD2102CEX

UNI-T UTD2102CEX Digital Oscilloscope 100MHz Bandwidth with USB OTG Interface 2 Channels Storage Portable Oscilloscope

Reference: 911

Uni-T 33A+ Multimeter

Digital multimeter UNI-T UT33A+

Reference: 314

Double-ended 50cm Cable Crocodile Clips

 Double-ended 50cm Cable  Crocodile Clips 5 colour available Red, Black, White, Green, Yellow.

Reference: 908

Digital Tachometer DT2234C+

Digital Tachometer DT2234C+