Reference: 1250

Heavy Duty High Torque Gear Motor

37GB-550 Gear Reducer Motor DC 12V 100 RPM Geared Motor High Torque 16.0 Kg.cm (Approximate Torque) 

Reference: 949

5v DC Mini Water Pump Micro Submersible Motor Pump 2.5-6V 120L/H

DC Voltage:2.5-6V Maximum lift:40-110cm / 15.75"-43.4" Flow rate:80-120L/H Outside diameter of water outlet: 7.45mm / 0.3" (our 7mm inner diameter tube is ok for this pump) Inside diameter of water outlet: 4.7mm / 0.18" Diameter:Approx. 24mm / 0.95" Length:Approx. 45mm / 1.8" Height:Approx. 33mm / 1.30" Material:engineering plastic Driving mode: brushless...

Reference: 295

Continuous Rotation Servo MG995 360 Degree Rotation

Continuous rotation servos are standard hobby RC servos that have been modified to offer open-loop speed control instead of their usual closed-loop position control. The modification effectively turns them into motors with integrated motor drivers. Just throw on a wheel and you have a drive system for your robot that can be controlled using Arduino.

Reference: 818

LDX-218 Servo Motor

LOBOT LDX-218 17KG Large Torque Metal Gear Dual Shaft Digital Servo High-precision potentiometer with the new design.  Convenient Plug-in wire. 180 degree rotation.  17kg large torque.  Full metal gear.

Reference: 34

MG996R 10kg Servo (Fully Metal)

MG996R 10kg Servo (Fully Metal) Brand Could be different variant

Reference: 1518

Servo Tester Gear Test CCPM Consistency Master Checker

Operating Voltage: DC 4.2-6.0v Output: Less than 15mA (5.0) Output Signal: 1.5ms ± 0.5ms Simultaneous Servo Test: 3 LED Mode Indicators: Manual / Neutral / Auto Testing Capabilities: Response Time / Neutral Position / Max Angles Size: 46mm x 32mm x 17mm (Approx.) Weight: 8g

Reference: 1357

12V Gear Motor High Torque 300 RPM

12V Gear Motor High Torque 300 RPM Shaft: 37mm Voltage: 12V, DC RPM: 300 Torque:  10.0Nm Approximate

Reference: 1248

Miniature Vibrating Motor

A Miniature 3V Vibration Motor measuring only 21mm long and 7mm in diameter. Pre-wired with red & black leads 90mm. Ideal for alerts and feedback functions.

Reference: 390

60 RPM 12 Volt DC High Torque Gear Motor

Features of 60 RPM High Torque 12 Volt DC Gear Motor: 60RPM 12V DC motors with Metal Gearbox and Metal Gears. 20000 RPM base motor. 6mm Dia shaft with M3 thread hole. Length 63 mm without shaft. Shaft length 30mm. 275gm weight. 20 kg cm torque. No-load current = 0.15 mA, Load current = upto 4 A(Max).

Reference: 819

LewanSoul LDX-227 Servo

LDX-227 Servo High-precision potentiometer with the new design.  Convenient Plug-in wire.  270 degree rotation. 17kg large torque.  Full metal gear.

Reference: 420

Vibration Motor

Description: A vibration motor! This itty-bitty, shaftless vibratory motor is perfect for non-audible indicators. Use in any number of applications to indicate to the wearer when a status has changed.  Documents: Datasheet

Reference: 285

Brand: RoboticsBD

Abs Material Pan Tilt Camera Mount With Servo Motor

3D Printed Pan Tilt Camera Mount With Servo Motor   Package Include: 1x 3D Printed Pan Tilt Bracket 2x 9g Servo Motor (Assambled with the Pan Tilt Bracket)   Fully assembled 3D Printed (ABS Filament) strong Pan Tilt Camera Mount With Servo Motor 9g

Reference: 363

12V 35KG Torque Turbo Worm Gear DC Motor with Metal Gearbox 100 RPM(Retired)

12V High Torque Turbo Worm Gear DC Motor with Metal Gearbox 54 RPM-45KG.CM Torque Model: JGB37-550 RPM: 100 Torque: 35KG.CM

Reference: 1340

N20 12V 200 RPM Micro Metal DC Gear Motor

DC Gear Motor 12V DC 200 RPM Features:Small volume, torsion big, all metal gear, durable, not easy to wear.Great replacement for the rusty or damaged DC geared speed reduce motor on the machine.Widely used on Boat, Car, Electric Bicycle, Fan, Home Appliance.Package Included:1x Gear Motor

Reference: 1061

6V DC Geared Motor 180RPM Dual Shaft

DC Gear Motor RPM: 180 Volt: DC 3V~6V Dual Shaft

Reference: 336

12V 45KG Torque Turbo Worm Gear DC Motor with Metal Gearbox 54 RPM

12V High Torque Turbo Worm Gear DC Motor with Metal Gearbox 54 RPM-45KG.CM Torque Model: JGB37-550 RPM: 54 Torque: 40KG.CM

Reference: 951

N20 DC 6V 200RPM Mini Metal Gear Motor

Rated Voltage: DC 6V Speed: 200RPM Shaft Diameter: 3mm Diameter: 12 mm fuselage without shaft length: 26 mm Output axial length: 10 MM

Reference: 573

DC 5V Stepper Motor + ULN2003 Driver Board (28BYJ-48) for Arduino

Voltage: 5VDiameter: 28mmStep angle: 5.625 x 1 / 64Reduction ratio: 1 / 64Stepper Motor Driver Board with ULN2003A, B, C, D four-phase LED indicates the status of the stepper motor workStepper motor with a standard interface, when used directly pluggable

Reference: 432

JF-0530B Pull Push Type Electric Solenoid Electromagnet 10mm 5N DC12V

Product Name : DC Solenoid Electromagnet;Model : JF-0530B;Rated Voltage : DC 12V RatedCurrent : 300mA;Action Form : Pull Push Type;Rated Stroke & Force : 10mm, 5N Body Size : 30 x 15x 15mm/1.2"x 0.59"x 0.59"(L*W*H);Pluger Dia. : 56mm/ 2.2" Cable Length : 20cm/ 7.9";Material : Metal, Electronic Parts Weight : 32g;Package Content : 1 x DC Solenoid...

Reference: 259

Arduino 2 Wheel Drive Mobile Robot Platform Chassis

Features: Model: HC-1 Quantity: 1 Color: Transparent + Yellow Material: Acrylic Working voltage: 3~12V RPM: 120 (Under 3V) Gear motor deceleration indicator Chassis made from acrylic material With installation holes, easy to use Great for DIY project Dimensions: 7.72 in x 4.13 in x 0.12 in (19.6 cm x 10.5 cm x 0.3 cm) Weight: 14.29 oz (405 g)

Reference: 218

High Torque Gear Motor 12V, 50 RPM

High Torque Gear Motor 12V, 50 RPM Volt: DC 12V RPM: 50 Torque 13KG/CM

Reference: 817

Nema 23 23HS5628 Stepper Motor

Nema 23 23HS5628 Stepper Motor 57 motor 165 Oz-in 56mm 2.8A DIA Step angle accuracy: + - 5%(full step,not load) Resistance accuracy: + - 10% Inductance accuracy: + - 20% Temperature rise: 80deg Max(rated current,2 phase on) Ambient temperature ----------—20deg ~+50deg Insulation resistance:100MΩ Min,500VDC Insultion Strength--------500VAC for one minute...

Reference: 1257

Mini Air Pump Motor USB Power Cable

Mini Airpump Motor 5V Powered through USB Port or Mobile Charger Underwater Air Supply 

Reference: 1379

Nema 23 23HS5628 2.8A Two Phase 6.35mm Shaft Stepper Motor With TB6600 Stepper Motor Driver

Nema 23 23HS5628 2.8A Two Phase 6.35mm Shaft Stepper Motor With TB6600 Stepper Motor Driver For CNC Part 3D Printer

Reference: 717

65mm Rubber Wheel with 37GB Motor Mounting Bracket

65mm Rubber Wheel with 37GB Motor Mounting Bracket

Reference: 913

6V-12V Mini Air Pump Motor

Note: This pump does NOT come with connecting wire, please choose motor cable of corresponding current to work with it.   Description: Makeblock air pump motor - DC 12V/370-02PM is widely used for aquarium tank oxygen circulate, DIY projects.

Reference: 936

1100 GPH 12V Submersible Marine Boat Bilge Water Pump

CE Passed 1100GPH Seaflo Marine Submersible Water Bilge Pump 12V 3Amp 12 Volt bilge pump  1100 gallons per hour  1-1 / 8 "tubing (29mm) ID size  3 Amp draw  3 1/2" (107 mm) Overall height x 2 3/8 "(60mm) diameter 

Reference: 217

TowerPro MG90s – Micro Metal Servo

Product Description Specification: Stall torque: 2.2kg/cm(4.8V )2.5kg/cm(6V)Operating speed: 0.11sec/60degree(4.8v), 0.10sec/60degree(6v)Operating voltage: 4.8-6.0VDead band width: 10usDimension: 23*12.2*29mmWeight: 14g

Reference: 716

65mm Rubber Wheel with 25GA Motor Mounting Bracket

1 x 65mm Wheel 1 x Mounting Bracket for 25GA Motor 1 x Hex Coupler for 25GA Motor 1 Set of Installation Screws

Reference: 1068

N20 12V 100 RPM Micro Metal DC Gear Motor

DC Gear Motor 12V DC 100 RPM Features:Small volume, torsion big, all metal gear, durable, not easy to wear.Great replacement for the rusty or damaged DC geared speed reduce motor on the machine.Widely used on Boat, Car, Electric Bicycle, Fan, Home Appliance.Package Included:1x Gear Motor