- New
Reference: RBD-1354
Jumper Wire Single 20cm
Length: 8 inches/20 CM (Long) Material: Copper Plated Pin Spacing: 2.54mm.
Reference: RBD-1354
Length: 8 inches/20 CM (Long) Material: Copper Plated Pin Spacing: 2.54mm.
Reference: RBD-0351
Contactless transmission of data and supply energy (no battery needed) Operating distance: Up to 100mm (depending on antenna geometry) RoboticsBD Operating frequency: 13.56MHz Data transfer: 106 kbit/s Data integrity: 16 Bit CRC, parity, bit coding bit counting Anticollision Typical ticketing transaction: <100 ms ( including backup management)...
Reference: 0245
Choose your desire Resistor value from below:
Reference: 0031
3 Types Available (Please select from option) 1. Male to Male 2. Male to Female 3. Female-Female
Reference: RBD-0768
Size: 5mm Color: RED Head Shape: Round Lens Appearance: Transparent
Reference: RBD-0761
Breadboard friendly Mounting Style: Through Hole Mounting Direction: Vertical
Reference: 1353
Length: 12.5 inches/30 CM (Long) Material: Copper Plated Pin Spacing: 2.54mm.
The YF-S201 Water Flow Measurement Sensor is an efficient solution for monitoring water flow in various applications. With a flow rate capacity ranging from 1 to 30 liters per minute, this sensor features a robust design, including a magnetic hall-effect sensor that accurately detects and outputs electrical pulses corresponding to water flow. The sensor's integrated hall-effect sensor is protected from water exposure, ensuring long-term durability and reliability. Each pulse generated by the sensor represents approximately 2.25 milliliters of water, making it easy to calculate the total flow by counting pulses.
This compact and easy-to-install sensor is ideal for basic flow measurement tasks and can be connected to standard 1/2" pipes. Note that the pulse rate may vary slightly depending on flow rate, fluid pressure, and sensor orientation, so careful calibration is required for precise measurements. Featured By RoboticsBD.
Product Images are shown for illustrative purposes only and may differ from the actual product.
RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD
RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD
RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD
General Specifications | |
Product Type | YF-S201 Water Flow Measurement Sensor |
Working Voltage | 5 to 18V DC (min tested working voltage 4.5V) |
Max Current Draw | 15mA @ 5V |
Working Flow Rate | 1 to 30 Liters/Minute |
Maximum Water Pressure | 2.0 MPa |
Flow Rate Pulse Characteristics | Frequency (Hz) = 7.5 * Flow rate (L/min) |
Operating Temperature | -25 ~ +80 °C |
Humidity Range | 35% - 80% RH |
Output Duty Cycle | 50% ±10% |
Output Rise Time | 0.04 µsec |
Pulses per Liter | 450 |
Cable Length | 15 cm |
Outer Diameter | 20 mm |
Inlet/Outlet Diameter | 11 mm |
Length | 62.5 mm |
Width | 36 mm |
Height | 35 mm |
Weight | 52 g |
Shipment Weight | 0.1 kg |
Shipment Dimensions | 9 × 6 × 6 cm |
Please allow 5% measuring deviation due to manual measurement.
RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD
1 x YF-S201 Water Flow Measurement Sensor with 1-30Liter/min Flow Rate – White
RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD
RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD
The latest price of YF-S201 Water Flow Measurement Sensor with 1-30Liter/min Flow Rate – White in Bangladesh is BDT 430 You can buy the YF-S201 Water Flow Measurement Sensor with 1-30Liter/min Flow Rate – White at best price from our RoboticsBD or visit RoboticsBD Office.
Please note that the product information provided on our website may not be entirely accurate as it is collected from various sources on the web. While we strive to provide the most up-to-date information possible, we cannot guarantee its accuracy. We recommend that you always read the product labels, warnings, and directions before using any product. |
Product Images are shown for illustrative purposes only and may differ from the actual product. |
Reference: RBD-0311
Working Voltage: 5 to 18V DC (min tested working voltage 4.5V). RoboticsBD Max current draw: 15mA @ 5V. Working Flow Rate: 1 to 30 Liters/Minute. Maximum water pressure: 2.0 MPa. Flow rate pulse characteristics: Frequency (Hz) = 7.5 * Flow rate (L/min). RoboticsBD
Reference: RBD-2143
DC 12V Water Flow Pump Mini Hydro Generator Turbine Suitable for energy conversion of water into electrical energy Can directly charge small batteries, mobile phones, or power LED lights Output current: Max. greater than equal 220mA
Reference: RBD-2978
Flow Range:0.3 to 6L Input/Output Diameter: 6.5mm Minimum rated working voltage: DC 5~24V Max. working current: 15mA (DC 5V) Working voltage range: DC 5~24V Load capability: <= 10mA (DC 5V)
Reference: RBD-2979
Working voltage: DC1.8-7V(low consumption version),7-24V(regular version), 7-24V(PLC version) Rated voltage: 7 to 24 V Pulse output duty cycle: 50+-10% Insulation resistance: 100M Ohm and above Input/Output Diameter: 9.5mm
Reference: RBD-2980
Working voltage range: DC 5 – 18V. Load capacity: ≤ 10 mA (DC 5V). Working temperature: ≤ 80 ℃ Lightweight, small size, easy to install. Inlaid with stainless steel impeller shaft, durable wearable. The seal ring with the upper and lower force structure never leaks. Non-violent shock, and chemical erosion.
Reference: RBD-2981
Model: YF-S402C Specification: G3/8 Input/output size: 15mm Operating voltage 5 to 18 V Analog Sensor Accuracy Up to 5% Water Proof Sensor
Reference: RBD-2982
Measures water flow from 10 to 200 liters per minute. Hall-effect sensor for accurate pulse signal output. Durable plastic body; waterproof, heat-resistant, and pressure-resistant. Suitable for industrial flow measurement applications. Easy installation and maintenance.
Reference: RBD-2983
Measures water flow from 1 to 120 liters per minute. Features a durable ABS and metal construction. Equipped with a hall-effect sensor for accurate pulse signal output. Suitable for use in water dispensers, coffee machines, and irrigation systems. Withstands water pressure up to 2.0 MPa.
Reference: RBD-2982
Measures water flow from 10 to 200 liters per minute. Hall-effect sensor for accurate pulse signal output. Durable plastic body; waterproof, heat-resistant, and pressure-resistant. Suitable for industrial flow measurement applications. Easy installation and maintenance.
Reference: RBD-1376
SensorModule : MPXV7002DP Measurement Range: 1psi, 100m/s (223mph/360kmh). Resolution: 0.84Pa. Data: Delivered at 14 bits from a 24 bit delta-sigma ADC. Low pass filtered Temperature compensated 10° to 60°C
Reference: RBD-1848
Compact Design Country Specific pressure Multiple Displayable Unit Multi-colored, two-part display Alphanumeric display
Reference: RBD-2962
Introducing the latest addition to RoboticsBD's product lineup, the 1.6MPa Stainless Steel Pressure Transducer Sensor. Crafted with high-quality stainless steel, this pressure transducer offers exceptional rigidity and durability, making it ideal for a variety of applications.
Reference: RBD-0687
Operating Voltage: 1.71V to 3.6V – would typically be operated from 3.3V. Operating Temperature: -40 to +85 deg. Celsius (full accuracy between 0 and +65 deg. C). Peak current: 1.12mA. RoboticsBD Operating Pressure: 300 hPa to 1100 hPa. Accuracy between 700 to 900hPa and 25 to 40 deg. C: ±0.12hPa and ±1.0m.
Reference: RBD-2987
Operating Voltage: 3.5-24VDC Operating Current: 15mA Insulation Resistance >100MOhm Nozzle Size: 1/8″
Reference: RBD-0311
Working Voltage: 5 to 18V DC (min tested working voltage 4.5V). RoboticsBD Max current draw: 15mA @ 5V. Working Flow Rate: 1 to 30 Liters/Minute. Maximum water pressure: 2.0 MPa. Flow rate pulse characteristics: Frequency (Hz) = 7.5 * Flow rate (L/min). RoboticsBD
Reference: RBD-0982
Model: HX710B Data Output Rate:10 SPS / 80SPS Max. Operating Current (mA):1.5 IC Package:16 Pin SOP
Reference: RBD-2979
Working voltage: DC1.8-7V(low consumption version),7-24V(regular version), 7-24V(PLC version) Rated voltage: 7 to 24 V Pulse output duty cycle: 50+-10% Insulation resistance: 100M Ohm and above Input/Output Diameter: 9.5mm
Reference: RBD-2965
Introducing the latest addition to RoboticsBD's product lineup, the 5MPa Stainless Steel Pressure Transducer Sensor. Crafted with high-quality stainless steel, this pressure transducer offers exceptional rigidity and durability, making it ideal for a variety of applications.
Reference: RBD-2983
Measures water flow from 1 to 120 liters per minute. Features a durable ABS and metal construction. Equipped with a hall-effect sensor for accurate pulse signal output. Suitable for use in water dispensers, coffee machines, and irrigation systems. Withstands water pressure up to 2.0 MPa.
Reference: RBD-2981
Model: YF-S402C Specification: G3/8 Input/output size: 15mm Operating voltage 5 to 18 V Analog Sensor Accuracy Up to 5% Water Proof Sensor
Reference: RBD-2964
Introducing the latest addition to RoboticsBD's product lineup, the 0.8MPa Stainless Steel Pressure Transducer Sensor. Crafted with high-quality stainless steel, this pressure transducer offers exceptional rigidity and durability, making it ideal for a variety of applications.
Reference: RBD-2967
Introducing the latest addition to RoboticsBD's product lineup, the 0.2MPa Stainless Steel Pressure Transducer Sensor. Crafted with high-quality stainless steel, this pressure transducer offers exceptional rigidity and durability, making it ideal for a variety of applications.
Reference: RBD-2978
Flow Range:0.3 to 6L Input/Output Diameter: 6.5mm Minimum rated working voltage: DC 5~24V Max. working current: 15mA (DC 5V) Working voltage range: DC 5~24V Load capability: <= 10mA (DC 5V)
Reference: RBD-2968
Introducing the latest addition to RoboticsBD's product lineup, the 10MPa Stainless Steel Pressure Transducer Sensor. Crafted with high-quality stainless steel, this pressure transducer offers exceptional rigidity and durability, making it ideal for a variety of applications.
Reference: RBD-1847
Compact Design Country Specific pressure Multiple Displayable Unit Multi-colored, two-part display Alphanumeric display Discontinued by Manufactured 2017
Reference: RBD-2147
The built-in 24bit AD converter. Immersion gold PCB, high quality, machine welding process to ensure quality. Power supply: 3 – 5V ( internal low dropout regulator ). Communication modes: Standard the IIC / SPI communication protocol.
Reference: RBD-2966
Introducing the latest addition to RoboticsBD's product lineup, the 1.2MPa Stainless Steel Pressure Transducer Sensor. Crafted with high-quality stainless steel, this pressure transducer offers exceptional rigidity and durability, making it ideal for a variety of applications.
Reference: RBD-2963
Introducing the latest addition to RoboticsBD's product lineup, the 3MPa Stainless Steel Pressure Transducer Sensor. Crafted with high-quality stainless steel, this pressure transducer offers exceptional rigidity and durability, making it ideal for a variety of applications.
Reference: RBD-1854
This module is compatible with various microcontroller control boards, such as arduino series microcontrollers. The module contains 2 kinds of interfaces. The module comes with a 20cm wire, which is long enough for your use. It has a short response time and quick response.
Reference: RBD-2980
Working voltage range: DC 5 – 18V. Load capacity: ≤ 10 mA (DC 5V). Working temperature: ≤ 80 ℃ Lightweight, small size, easy to install. Inlaid with stainless steel impeller shaft, durable wearable. The seal ring with the upper and lower force structure never leaks. Non-violent shock, and chemical erosion.