- Raspberry Pi
- Mini Computer/ PC
- 3D Printer
- Internet of things (IoT)
- Home Automation
- Learning Kit
- Arduino Shield & Module
- Robotics Parts
- Industrial Shield
- Industrial Component
- Motor Driver
- Communication Module
- Robot Platform Chassis
- Power Module & Adapter
- PLC Cable
- Tools & Accessories
- Thermal Printer
- Solar Panel
- Battery & Charger
- Retired Products
- CNC & Laser Cutter
Length: 8.5 inches (Medium) Material: Copper Plated.EachPin Spacing: 2.54mm.Color: Colorfulcompatible with 2.54mm mil spacing pin headers.It can be used for PCB project, pc motherboard, etc.Allow you to plug and unplug easily for prototyping.Package Contents: 1 x Jumper Wire You will get only one pcs.
Arduino UNO in Bangladesh The Arduino Uno is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller.
Waveshare 10.1inch Capacitive Touch Screen LCD (B) with Case 1280×800 HDMI-Compatible IPS display
The LCD and Control Board
IPS screen,1280x800 high resolution
Capacitive touch control supports up to ten-points touch
When works with Raspberry Pi, supports Raspbian, Ubuntu, single touch, and driver free
When working as a computer monitor, supports Windows 10/8.1/8/7, ten-points touch, and driver free
Supports Banana Pi, Banana Pro, comes with Lubuntu, Raspbian images
Supports BB Black, comes with Angstrom image
HDMI interface for displaying, USB interface for touch control
Backlight control to lower power consumption
Note: To use the LCD with the following mini-PCs, additional cables are required and should be purchased separately:
Raspberry Pi Zero: HDMI cable, USB-type-A-receptacle-to-Micro-B-plug-cable
BB Black: HDMI cable
Store Pickup Available!
Free Ship Over 5000 BDT
- Display PortHDMI
- Display PanelIPS
- Viewing Angle170°
- Touch TypeCapacitive
- Touch Points10-Points
- Touch PortUSB
- Touch PanelToughened Glass
- ConsumptionLow Power
Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free
Supports Retropie, driver free
Supports all versions of Raspberry Pi
Working With Raspberry Pi 4
Working With Raspberry Pi 3B+
Working With Raspberry Pi Zero W
Working With Mini PC
1) up to 10-points touch, depending on the operating system. 2) up to 6H hardness toughened glass panel.
IPS, 1280×800, 10.1 inch Capacitive Touch Screen LCD, Supports Multi mini-PCs, Multi Systems
Please refer to How to assemble 10.1inch-HDMI LCD (B) holder
Working with PC
This product supports Windows 10/8.1/8/7 OS. For the Windows 10/8.1/8 OS, the touch screen supports multi-touch up to 10 points. For some Window 7 OS, the touch screen supports single touch only.
Please make sure the connections are done in a right sequence, or else the LCD may not work well.
- Connect the Power Only Port of the LCD to a 5V 2.5A power adapter with a Type A to micro USB cable.
- Connect the Touch port of the LCD to one of the USB ports on your PC.
- Connect the HDMI port of the LCD to the HDMI port on your PC with an HDMI cable
- When multiple displays are detected by your PC, the LCD can only be used to control the cursor on main display. So it is proposed to set the LCD as the main display.
Generally, you will see the screen displays the interface as the figure shows below. In this interface, slightly click the screen can perform the left-key mouse action, and long press the screen can perform the right-key mouse action. (You can also control the Back light of the screen with the back light adjustment button; see the mark 1 shows in the following figure.)
Calibration touch on Win 10 PC
Take the windows10 system as an example:
- 1. Enter the Windows settings of the system, type in the search bar and click "Calibrate the screen for pen or touch input" (as shown in the picture below)
- 2. Click "Setup" in the pop-up "Tablet PC Settings" interface:
- 3. The following text prompt will appear on the screen. Please tap the touch screen with your finger, and the computer will recognize it as a touch screen.
【Note】If the touch screen is blank, press the "Enter" key, and the text prompt will switch to the touch screen. (The screen which displays the text prompt will be used as a touch screen!)
Working with Raspberry Pi
For the Windows OS on PC, the resolution of the LCD is automatically identified. Hence, you do not need to make the relative settings. When working with Raspberry Pi, you should set the resolution of the LCD by yourself, or else the LCD screen will not work. For more detail information, please read the following section.
At the beginning, you should download the latest image file, RASPBIAN or UBUNTU MATE, from the website: http://www.raspberrypi.org/downloads/.
- Download the image file (zipped) into your PC, and extract it, then you will get a file with the expansion name .img
- Connect a TF card to your PC, and format your TF card with the software SD Formatter. Notices: The capability of TF card in used here should be more than 4GB. In this operation, a TF card reader is also required, which has to be purchased separately.
- Start the software Win32DiskImager, and select image file downloaded in the first step, then, click the button Write to program the system image file.
- When the programming finished, open the config.txt file under the root directory in the TF card, and add the following lines at the end of the file. Then, save the modification and pop-out the TF card.
max_usb_current=1 hdmi_group=2 hdmi_mode=87 hdmi_cvt 1280 800 60 6 0 0 0 hdmi_drive=1
If you use the LCD with Raspberry Pi 4B, you need to remove line dtoverlay=vc4-fkms-V3D from config.txt file
if the statements above do not work properly, replace them with the following lines:
max_usb_current=1 hdmi_group=2 hdmi_mode=27
If the LCD is used for Raspberry Pi and there are "ghost images" on the LCD, try to comment or delete this line in the config.txt to fix such cases:
- Connect the Power Only interface of the LCD to a 5V 2.5A power adapter with a Type A to micro USB cable (Normally, the LCD will perform screen-clear and self-checking. If there is nothing displayed on the screen, please check whether the LCD screen has been turned on. In case that the screen is ON, please check if the FFC cable is connected properly and in a good contact).
- Connect the HDMI interface of the LCD to the HDMI interface on your Raspberry Pi with a HDMI cable
- Connect the Touch interface of the LCD to one of the USB interfaces on your Pi.
- Insert a TF card into the TF card socket on the Raspberry Pi, and then power up the Pi. Waiting for a while, you may see the following interface. (Now, you can control the back light of the LCD with the back light adjustment button; see the mark 1 shows in the following figure.)
Rotation(Working with Raspberry Pi)
Add this statement in the config.txt file (the config file is located in the root directory of the TF card, which is named /boot):
display_rotate=1 #1：90；2: 180； 3: 270
Note: For Raspberry Pi 4, you need to comment out dtoverlay=vc4-fkms-V3D.
And then restart the Raspberry Pi after saving.
After the display is rotated, the position of touch is incorrect because the touch doesn’t change with the display angle. So the touch also needs to be modified.
sudo apt-get install xserver-xorg-input-libinput
If the system you installed is Ubuntu or Jetson Nano. The installation code is:
sudo apt install xserver-xorg-input-synaptics
2.Create the xorg.conf.d directory under /etc/X11/ (if the directory already exists, proceed directly to step 3).
sudo mkdir /etc/X11/xorg.conf.d
3.Copy the 40-libinput-conf file to the directory you created just now.
sudo cp /usr/share/X11/xorg.conf.d/40-libinput.conf /etc/X11/xorg.conf.d/
4.Edit this file.
sudo nano /etc/X11/xorg.conf.d/40-libinput.conf
Find the part of the touchscreen, add the following statement inside, and then save the file.
Option "CalibrationMatrix" "0 1 0 -1 0 1 0 0 1"
Similar to the picture below:
After completing these steps. The LCD could rotate 90 degrees both display and touch function.
90 degree: Option "CalibrationMatrix" "0 1 0 -1 0 1 0 0 1"
180 degree: Option "CalibrationMatrix" "-1 0 1 0 -1 1 0 0 1"
270 degree: Option "CalibrationMatrix" "0 -1 1 1 0 0 0 0 1"
Demo video about rotating
Micro HDMI V1.4 Male to HDMI Male Connection Cable - Black (1.5m) Compatible with Raspberry Pi 4 You can use this cable to connect your regular HDMI Monitor/ HDMI TV with Raspberry Pi 4 Raspberry Pi 4 got Dual Micro HDMI port for dual monitor setup. Be sure to purchase 2 cables if you are looking for the dual monitor setup!
7inch HDMI LCD (C), 1024×600, IPS, with Bicolor case Original Waveshare Included: 7inch HDMI LCD (C) x 1 HDMI cable x 1 HDMI to Micro HDMI Adapter x 1 USB type A plug to micro B plug cable x 1 RPi screws pack (4pcs) x 1 Bicolor Case for 7inch LCD x 1 Screws Pack x 1 Quick start sheet x1
Featuring a quad-core 64-bit processor, 4GB of RAM, wireless networking, dual-display output, and 4K video playback, as well as a 40-pin GPIO header, Raspberry Pi 400 is a powerful, easy-to-use computer built into a neat and portable keyboard.*This is the keyboard with built-in Raspberry Pi 4 4GB Inside.*You need to separately purchase* Raspberry Pi Power...
Features:1. The case can be used with a CPU cooling fan.2. You can through the GPIO cable by the side of the case .3. ABS material is harder than the acrylic case, provide better protection for raspberry pi.4. There is the hole on the bottom of the case, so you can hang the case on the wall.Specifications:1. Color: Black2. Weight: 35 g approx3. Material:...
The Raspberry Pi Zero W is half the size of a Model A+, with twice the utility. A tiny Raspberry Pi that’s affordable enough for any project! The Raspberry Pi Zero W extends the Pi Zero family and comes with added wireless LAN and Bluetooth connectivity.
5 inch Resistive Touch Screen LCD, HDMI interface, Designed for Raspberry Pi Installation Instruction: http://www.waveshare.com/wiki/5inch_HDMI_LCD Raspbian Image for 5 inch HDMI Diplay with Touch : Raspbian 5 inch HDMI with Touch Download Link
Raspberry Pi 3 Kodi Home Theater. Raspberry Pi 3 KODI Media Center Kit Raspberry Pi 3 Model B Raspberry Pi Cooling Fan Case Heat Sink 16GB Class 10 MicroSD with KODI And Addon Installed HDMI Cable Raspberry Pi Power Adapter Raspberry Pi Remote Built in Wifi and Bluetooth
রাস্পবেরি পাই ৩ মডেল বি পৃথিবীর অন্যতম ক্রেডিট কার্ড সাইজের শক্তিশালী কম্পিউটার। এটি ফুল এইচডি ভিডিও প্লেব্যাক সমর্থন করে। এটি মূলত লিনাক্স অপারেটিং সিস্টেম সাপোর্ট করে। অনেক ধরনের প্রোগ্রাম ডেভলপ করা যায়। রাস্পবেরি পাই ৩ মডেল বি উইন্ডোস ১০ iot সাপোর্ট করে। কি কি থাকছে ? ১ টি রাস্পবেরি পাই ৩ মডেল বি ১ টি কুলিং ফ্যান কেস রাস্পবেরি পাই এর হিট সিংক...
Standard Raspberry Pi Pico female header for direct attaching Raspberry Pi Pico (if male header soldered), or just through jumper wires Two sets of 2x20 male header allow connecting more Raspberry Pi Pico expansion modules Clear pinout labels on the front side, easy to use Immersion gold process, beautiful & practical, stunning aesthetic looking...
Lexar High-Performance microSDXC 633x 128GB (U3+A1+V30) Card DJI Mavic Series Compatible
SanDisk Ultra 16GB Ultra Micro SDHC UHS-I/Class 10 Card with Adapter Ideal for premium Android based smartphones tablets & raspberry pi Up to 80 MB/s transfer speed Class 10 for Full HD video recording and playback Water proof, temperature proof, shock proof, X ray proof and magnet proof Memory Zone app lets you auto-manage media and memory for peak...
Control your computer from afar using this amazing new PC Remote control. Featuring full mouse functionality, Numpad style number and letter input, multiple pre-programmed function buttons to speed up browsing, 4 programmable buttons and more. It's a great choice for controlling your Raspberry Pi or PC. Compatible With: Raspberry Pi, Windows
Raspberry Pi Power Adapter with Switch Output: 5V, 3000mA Compatible with: Raspberry Pi B+, 2, 2B, 2B+,3 ,3B+, Zero, Zero W. It has a switch so you can easily power off the device without having to unplug it right from the socket.
10.1 inch resolution(1024x600) TFT Monitor,Clear Screen. Multifunctional Monitor Screen: HDMI/VGA/BNC/USB/AV Input, Dual High-quality Built-in Speakers Support Raspberry Pi & Windows PC Automatically. Built-in Media Player with Remote.
STOCK OUT 10.1 inch HD resolution(1280x800) IPS Monitor,Clear and colorful Screen. Multifunctional Monitor Screen: HDMI/VGA/BNC/USB/AV Input, Dual High-quality Built-in Speakers Support Raspberry Pi & Windows PC Automatically. Built-in Media Player with Remote.
This is a heatsink pack for Raspberry Pi. It contains 3 different heatsinks which respectively corresponds to 3 different chips. It is a perfect solution for cooling the operating temperature when the Raspberry Pi is dealing with complicated work. Compatible With: Pi4B, Pi 3B, PI 3B+
Capacity 16GB, Micro Card Class 10/UHS-I Speed: Up to 95MB/s read speed, up to 45MB/s write Perfect for Apple iPhone tablets/Digital Cameras/ Raspberry Pi Box contents: Transcend 16GB Micro, premium 300s Class 10 UHS-I, SDHC10 card with adapter
Features: Raspberry Pi 3 Model B+ Transparent Acrylic Shell Case New and high quality Compatible with Latest Version Raspberry Pi 3 Model and Raspberry Pi 2 Special design to install a cooling fan (size:3*3cm) The cooling fan is DC 5V 0.2A Case Material: Acrylic Case Color might be different than the picture. (Transparent, Blue or Black) Cooling fan and...
This SD Card is original 32 GB Class 10, MMC It's for Raspberry PI. This SD Card is loaded with Raspbian OS. Capacity 32GB, Micro Card Class 10/UHS-I Speed: Up to 95MB/s read speed, up to 45MB/s write Perfect for Apple iPhone/tablets/Digital Cameras/Raspberry Pi Box contents: Transcend 32GB Micro, premium 300s Class 10 UHS-I, SDHC10 card with adapter
What's on Board Raspberry Pi GPIO interface : for connecting Raspberry Pi USB TO UART : control the Pi through serial terminal AD/DA IO interface : screw terminal 1-WIRE interface : for connecting 1-WIRE devices like DS18B20 Sensor interface : for connecting various sensors 0.96inch OLED : SSD1306 driver, 128×64 resolution, SPI interface Buzzer
Key Features **New for V2** Full-size HDMI ports - Use your existing cables! Infrared receiver - perfect for media centre projects! Sleek Aluminium Enclosure Made with aluminium alloy and polished with a modern Space Grey finish for stunning aesthetics and functionality. Passive & Active Cooling The case top provides passive cooling for the Raspberry...
Discover the power of AI and robotics with NVIDIA® Jetson Nano™ 2GB Developer Kit with a more economical price aiming to deliver the performance to run modern AI workloads using the entire GPU-accelerated NVIDIA software stack in a small form factor to even more educators, students, developers, & enthusiasts.
JT308 RFID Card Reader - 125Khz The RFID Card Reader is small in size and it is an EM card reader with a USB interface. It reads the ID number from the EM 4100 card or a compatible card. After detecting the card, the card number will be sent directly via the USB interface, just like the entry number from the USB keyboard.