Reference: RBD-0169

Flex Sensor 2.2"

5 reviews

Flex length: 5.6 cm. Total Length: 2.2″ (7 cm). Life Cycle : >1 million. Height : 0.43mm (0.017″), Flat Resistance: 10K Ohms ±30%. Power Rating: 0.5 Watts.

Reference: RBD-0368

Force Sensitive Resistor 0.5"

2 reviews

Thickness: 0.4mm Trigger Force: 20g, triggered (default resistance<200kΩ)  Pressure Measuring Range: 20g~6kg Static Pressure & Dynamic Pressure Measurement (within the frequency of 10Hz) Initial Resistance: >10MΩ Activation Time: <0.01S Operating Temperature: -40°C~+85°C  Lifespan: >1million times Hysteresis: +10%，(RF+ -RF-)/FR+，1000g...

Reference: RBD-0321

PT100 Platinum Resister Temperature Sensor Waterproof Probe -20℃ ~ 450℃

New PT-100 Temperature Sensor AvailableClick Here PT100 Platinum Resister Temperature Sensor Waterproof Probe -20℃ ~ 450℃

Reference: RBD-0982

Digital Barometric Pressure Sensor Module 0-40kPa

2 reviews

Model: HX710B Data Output Rate:10 SPS / 80SPS Max. Operating Current (mA):1.5 IC Package:16 Pin SOP

Reference: RBD-0958

Air Quality Breakout - CCS811

4 reviews

Five Operating Modes Integrated MCU Onboard Processing Standard I2C Digital Interface Optimized Low-Power Modes Optional NTC Thermistor Pins

Reference: RBD-1854

Resistive Film Pressure Sensor Module Pin Header Analog Signal 200mm

This module is compatible with various microcontroller control boards, such as arduino series microcontrollers. The module contains 2 kinds of interfaces. The module comes with a 20cm wire, which is long enough for your use. It has a short response time and quick response.

Reference: RBD-0689

LM75A IIC I2C High Accuracy Digital Temperature Sensor

1 review

Operating Voltage: 2.8 V to 5.5 V Accuracy: ± 1.5°C Zero power resistance: 100 KΩ Operating temperature range: -55 ~ +125 ℃

Reference: RBD-0695

MAX31865 SPI PT100/PT1000 RTD-to-Digital Converter Board

Integration Lowers System Cost, Simplifies Design Efforts, and Reduces Design Cycle Time High Accuracy Facilitates Meeting Error Budgets 15-Bit ADC Resolution; Nominal Temperature Resolution 0.03125NC (Varies Due to RTD Nonlinearity) Total Accuracy Over All Operating Conditions:

Reference: RBD-2472

Amphenol FCI Clincher Connector 2 Position Male

Note: Please be aware that once the connector is closed it can't be unlocked

Reference: RBD-1751

MP-135 MP503 Air Quality Sensor Module

1 review

Detection Gas: H2, Alcohol, CO, VOC  Detection Range: 10～500ppmH2 5～500ppm Alcohol 10～500ppm CO Air Quality Sensor Module

Reference: RBD-2851

Force Sensing Resistor Flexible Thin Pressure Sensor MD30-60 150g-20kg 30mm

Shape: Circular. Sensing Area diameter (mm): 30 Min Force: 150 gm. Max Force: 20Kg. Length (mm): 42. Weight (gm): 2.

Reference: RBD-1062

AMG8833 IR Infrared 8*8 Thermal Imager Array Temperature Sensor

Temperature detection of the two-dimensional area: 8 × 8 (64 pixels). Digital output (capability of temperature value output). Compact SMD package (adaptively to reflow mounting). RoHS compliant.

Reference: RBD-2852

Force Sensing Resistor Flexible Thin Pressure Sensor RP-C18.3-LT 20g-6kg 18.3mm

Shape: Circular. Sensing Area diameter (mm): 18.3 Min Force: 20 gm. Max Force: 6Kg. Length (mm): 60. Weight (gm): 2.

Reference: RBD-2853

Force Sensing Resistor Flexible Thin Pressure Sensor RP-C5-LT 20g-1kg 5mm

Shape: Circular. Sensing Area diameter 5mm Min Force: 20 gm. Max Force: 1Kg. Length (mm): 65. Weight (gm): 2.

Reference: RBD-2075

MQ-2 Gas Sensor Module

1 review

MQ-2 Smoke Gas Detector Sensor  ME084 Module for Arduino Operating Voltage:+5V Preheat Duration:20 s

Reference: RBD-2854

Force Sensor Module - FSR 402

Measure Applied Force: Reads pressure variations for various applications. Analog and Digital Outputs: Provides flexibility for data acquisition. Adjustable Threshold: Set sensitivity based on your project requirements. Compact Design: Integrates seamlessly into various project

Reference: RBD-1190

NTC Thermistor 10K

12 reviews

Temperature Coefficient Type: NTC Thermal Time Constant: 10s Resistance  10kΩ Tolerance: ±1% Maximum Power Rating: 75mW Maximum Operating Temperature: +150°C Minimum Operating Temperature: -80°C Dimensions(dia.): 2 mm Length: 30mm Application: Compensation, Control, Measurement, etc.

Reference: RBD-2325

Brand: DFRobot

Gravity Analog Dissolved Oxygen Sensor / Meter Kit for Arduino

This is a dissolved oxygen sensor kit. A dissolved oxygen meter is used to measure the dissolved oxygen in water, to reflect the water quality. It is widely applied in many water quality applications, such as aquaculture, environment monitoring, natural science, etc.  There’s an old saying regarding keeping fish, “Good fish deserves good water”. Good...

Reference: RBD-2860

Dual Sensitivity Force Sensor Module - FSR 402

Measure Applied Force: Reads pressure variations for various applications. Analog and Digital Outputs: Provides flexibility for data acquisition. Adjustable Threshold: Set sensitivity based on your project requirements. Compact Design: Integrates seamlessly into various project

Reference: RBD-1198

DS18B20 Digital Thermometer

3 reviews

Industrial Systems Consumer Products Thermometers Thermally Sensitive Systems

Reference: RBD-2508

ENS160 AHT21 Carbon Dioxide CO2 eCO2 TVOC Air Quality Temperature & Humidity Sensor

The ENS160 is a digital multi-gas sensor specifically designed for indoor air quality testing that optimizes the detection of a wide variety of gases and volatile organic compounds (VOCS), including toluene, hydrogen, ethanol, N02 and ozone. The air quality sensor is used in home and building automation, consumer products, electrical and air purification

Reference: RBD-2729

SGP41 Air Quality Digital TVOC Detection Sensor

The SGP41 from Sensirion is an innovative VOC and NOx sensor engineered to serve as a digital smart switch and regulation unit in air treatment systems like air purifiers. Utilizing Sensirion's advanced Gas Index Algorithm, the sensor accurately processes two distinct signals, enabling automatic triggering of air treatment devices for the removal of...

Reference: RBD-2730

SGP40 Air Quality Digital TVOC Detection Sensor

The SGP40 is a digital gas sensor designed for easy integration into air purifiers or demand-controlled ventilation systems. Sensirion’s CMOSens® technology offers a complete, easy-to-use sensor system on a single chip featuring a digital I2C interface and a temperature-controlled micro hotplate, providing a humiditycompensated VOC based indoor air...

Reference: RBD-2835

Explosive Gas Sensor Figaro TGS813-A00 Original

The sensor has high sensitivity to gases such as methane, propane, butane and hydrogen. The supply voltage is 24 V. Measuring range is up to 10,000 ppm.

Reference: RBD-2839

Explosive Combustible Gas Sensor TGS813

The TGS 813 Combustible Gas Sensor is a versatile and reliable solution for detecting a wide range of combustible gases. With its high sensitivity and long life, this sensor is ideal for applications such as domestic gas leak detectors, portable gas detectors, and more. This is generic TGS813 Manufactured in China

Reference: RBD-1756

TMP36 Temperature Sensor

7 reviews

TMP36 Temperature Sensor Low Voltage Temperature Sensors

Reference: RBD-2083

Analog Temperature Sensor Module

3 reviews

Operating Voltage : 5v. Temperature measurement range : -55°C to 125°C. Measurement Accuracy : ±0.5°C.

Reference: RBD-2084

Digital Temperature Module

1 review

Power supply: 3 – 5V Good sensitivity The output format: Digital switching output (0 and 1) The comparator output signal is clean, good waveform, driving ability, more than 15mA. A fixed bolt holes for easy installation. Using a wide voltage LM393 comparator.

Reference: RBD-2091

MY18E20 DS18B20 Compatible Temperature Sensor Module

1 review

Digital signal output 18B20 Temperature Sensor Chip (MY18E20 or DS18b20) Resolution adjustment ranges from 9-12 bytes. Send data via a pin Temperature measurement ranges: -55°C to +125°C, be accurate to 0.5°C.Compatible with DS18B20

Reference: RBD-2094

DHT11 Digital Relative Humidity and Temperature Sensor Module

3 reviews

The module can detect the surrounding environment of the humidity and temperature High reliability and excellent long-term stability The output from the digital output Humidity measuring range: 20%~90%RH(0~50 degree (temperature compensation). Temperature measuring range: 0~+50degree. Humidity measurement accuracy: ±5.0%RH. Temperature measurement...

Reference: RBD-2249

20mm 2.4Mhz Ultrasonic Mist Maker Fogger Atomizing Transducer

3 reviews

Made From High-Quality Materials. Electronic High-Frequency Oscillations (2.4MHz). Material: Ceramic, Wire Diameter: Atomizer: 2cm/0.79in; Sealing ring: 2.5cm/0.98in

Reference: RBD-2338

DHT22 Digital Temperature Humidity Sensor Module

High precision Capacitive type Full range temperature compensated Relative humidity and temperature measurement Calibrated digital signal Check out the Authentic DHT22 module