Reference: RBD-0337

Brand: Waveshare

Liquid Level Sensor for Arduino (WaveShare)

1 review

Detection depth: 48mm Power: 2.0V ~ 5.0V Dimension: 19.0mm * 63.0mm Mounting holes size: 2.0mm

Reference: RBD-0419

SparkFun Particle Sensor Breakout - MAX30105

Features: Built-in Red, IR, and Green LEDs 5V operation (3.3V is allowed, but green LED is not guaranteed to operate) Applications include presence detection, distance sensing (18" max), pulse oximetry, blood oxygen saturation level (SpO2), smoke and particle detection Documents: Schematic Eagle Files Hookup Guide Datasheet (MAX30105) MAX3010x Sensor...

Reference: RBD-0428

APDS-9930 RGB and Gesture Sensor

Operational Voltage: 3.3V. Ambient Light & RGB Color Sensing. Proximity Sensing. Gesture Detection. Operating Range: 4-8in (10-20cm). I2C Interface (I2C Address: 0x39). RoboticsBD

Reference: RBD-0622

RCWL-0516 Microwave Radar Sensor Module Human Body Induction Switch Module

6 reviews

Transmission signal processing control chip RCWL-9196 Wide operating voltage range 4.0V to 28.0V Penetrating detection capability, compared with the traditional infrared feeling PIR Adjustable Block time and distance Operating Current: 2.8mA (typical); 3mA (max) Detection Distance: 5-9m Transmitting Power: 20mW (typical); 30mW (max) RoboticsBD

Reference: RBD-1208

Laser Receiving Sensor

6 reviews

Working Voltage: 5V DC Operating Temperature: -30ºc ~ 85ºc Output high level when received the laser signal Output low level when not receive laser signal. Application: Electronic Circuits

Reference: RBD-0683

Water Level Sensor Depth of Detection Water Sensor for Arduino

7 reviews

Operating voltage: DC3-5V Operating current: less than 20mA Sensor Type: Analog Detection Area: 40mmx16mm Operating temperature: 10℃-30℃ Humidity: 10% -90% non-condensing

Reference: RBD-0816

VL6180 VL6180X ToF Range Finder Sensor

1 review

Power Supply Voltage: 3.3V~5V Operating Current: ＜5mA Measuring Distance: 5-100mm VCSEL light source Strong anti-interference Based on DFrobot Fermion VL6180X ToF Distance Ranging Sensor (Breakout)

Reference: RBD-1740

Vibration Sensor Module Vibration Switch Alarm Module for Arduino

1 review

Operating voltage: 3.3 to 5VDC Ball Rolling type of tilt sensor. This small module is easy to use. A fixed bolt hole for easy installation Wide voltage LM393 comparator

Reference: RBD-0822

Hall Effect Sensor Switch Magnetic Detector Module For Arduino

7 reviews

S49E hall sensor Features wide-range voltage comparator LM393 Signal output indicator Analog / Digital output

Reference: RBD-1062

AMG8833 IR Infrared 8*8 Thermal Imager Array Temperature Sensor

Temperature detection of the two-dimensional area: 8 × 8 (64 pixels). Digital output (capability of temperature value output). Compact SMD package (adaptively to reflow mounting). RoHS compliant.

Reference: RBD-1811

AS5600 Magnetic Induction Encoder Angle Measurement Sensor

2 reviews

AS5600 Magnetic Induction Angle Measurement Sensor

Reference: RBD-1192

Hall Effect Sensor 6851/A3144

4 reviews

Digital Output Hall-effect sensor. Operating voltage: typically 5V. Output Current: 25mA. It can be used to detect both the poles of a magnet.

Reference: RBD-1813

ICM-20948 MEMS Motion Tracking Device Sensor Board 9 Axis

1 review

ICM-20948 MEMS Motion Tracking Device Sensor Board 9 Axis

Reference: RBD-1194

Reflective Photo Sensor (RPR-220)

6 reviews

Product Name : Optical Sensor Switch Model : RPR220 Color : Black Net Weigh : 3g Material : Plastic, Metal Detection Distance：1-13mm Working Voltage:DC 30V(Max) Output Type:Photo Transistor

Reference: RBD-1199

Hall Effect Sensor A1302 49E

5 reviews

Low-noise output Fast power-on time Ratiometric rail-to-rail output 4.5 to 6.0 V operation Solid-state reliability Factory-programmed at end-of-line for optimumperformance Robust ESD performance 

Reference: RBD-1203

Sharp GP2Y0A21YK0F Analog Distance Sensor 10-80cm

4 reviews

Distance measuring range: 10 cm to 80 cm Output type: Analog voltage Output voltage differential over distance range: 2.05 V (typical) Update period: 38 ± 10 ms

Reference: RBD-2221

10.525GHz HB100X Microwave Sensor Module

Microwave sensor module Uses 10.525 GHz band to detect movement Easy to use, can be connected directly to a microcontroller Built-in amplifier Ideal for use with a microcontroller Widely used in industrial, transportation, and civil devices

Reference: RBD-1209

Miniature Solar Cell - BPW34 Photodiode

1 review

Package type: leaded Package form: top view Radiant sensitive area (in mm2): 7.5 High photo sensitivity High radiant sensitivity Suitable for visible and near infrared radiation Fast response times Angle of half sensitivity: phi = ± 65°

Reference: RBD-2339

AM312 Mini PIR Motion Sensor

The AM312 is an ultra-miniature PIR module that uses a pyroelectric sensor similar to the one found in the common SR501 but in a more compact form factor.

Reference: RBD-1210

OPT101P PHOTODIODE/AMPLIFIER

Single Supply:2.7-36V High Responsivity:0.45A/W(650nm) Bandwidth:14Khz

Reference: RBD-2351

HLK-LD2410C 24GHz mmWave 5M Human Presence Radar Sensor Motion Module

1 review

HLK-LD2410C is a high-sensitivity 24GHz human presence status sensing module developed by Hi-Link Electronics. Its working principle is to use FMCW frequency-modulated continuous wave, to detect human targets in the set space, combined with radar signal processing, accurate human body induction algorithm, to achieve high sensitive human presence status...

Reference: RBD-2352

HLK-LD2410B with BLE 24GHz mmWave Intelligent Switch Human Presence Sensing Radar Module

LD2410B is a high-sensitivity 24GHz human presence status sensing module developed by Hilink Electronics. Its working principle is to use FMCW frequency-modulated continuous wave to detect human targets in the set space. Combined with radar signal processing and accurate human body sensing algorithms, it realizes high-sensitivity human presence status...

Reference: RBD-2364

Pyroelectric Infrared PIR Sensor Human Body Detecting PIR Motion Sensor Module

1 review

Pyroelectric Infrared Sensor Human Body Detecting PIR Motion Sensor Module for Arduino MCU 011050 Black Optical Lens

Reference: RBD-2395

Mini HLK-LD2450 24G Smart Home Motion Target Tracking Radar Sensor Module Kit

mmWave human presence sensor. It uses motion target tracking and can detect up to 3 people. 

Reference: RBD-2657

PIR Infrared Motion Sensor Auto Electric Switch

Compact and lightweight design for easy installation and operation, offering a plug-and-play experience. Automatically activates when detecting human body temperature within the sensing area in low-light environments, enabling automated control of connected lamps (with a 45-second time delay). Caution: Avoid using multiple lights in series or parallel and...

Reference: RBD-2743

LIS3DSH High Resolution Three Axis Triaxial Accelerometer Module

Wide supply voltage 1.71 V to 3.6 V Independent IO power (1.8V) and power supply voltage compatible Ultra-low power consumption of ± 2g / ± 4G / ± 6g / ± 8G / ± 16g IIC  / SPI digital output interface 16-bit data output Programmable Embedded State Machine Embedded temperature sensor Embedded self-test Embedded FIFO 10,000 g high impact resistance

Reference: RBD-2745

LSM9DS1 9DOF Accel/Mag/Gyro/Temp Sensor Module

The LSM9DS1 is a versatile, motion-sensing system-in-a-chip. It houses a 3-axis accelerometer, 3-axis gyroscope, and 3-axis magnetometer – nine degrees of freedom (9DOF) in a single IC! The LSM9DS1 is equipped with a digital interface, but even that is flexible: it supports both I2C and SPI, so you’ll be hard-pressed to find a microcontroller it doesn’t...

Reference: RBD-2762

GY-362 ADXL362 Triaxial Accelerometer Sensor Module

The GY-362 ADXL362 Sensor Module is a high-precision accelerometer module designed for a wide range of motion sensing applications. Powered by Analog Devices' ADXL362, this module offers ultra-low power consumption, exceptional accuracy, and versatile functionality.

Reference: RBD-2783

LSM303DLH 3-Axis Electronic Compass Accelerometer Module

The GY-51 LSM303DLH chip has an accelerometer, magnetometer, A / D converters and signal conditioning circuit integrated. Still, the communication to the processor is done through the I2C bus. Thus only one chip is required to achieve a six-axis data detection and output. The LSM303DLH requires very little peripheral devices.

Reference: RBD-2790

Hall-Effect Sensor - US1881 (Latching)

The US1881 is an integrated Hall-Effect latched sensor. That's nice but what does it do? Holding a magnet near the sensor will cause the output pin to toggle. This makes for a robust presence sensor. A reed sensor also works nicely, but can be limited by the glass encapsulation and size. A Hall-Effect sensor is much smaller, but can handle less current...

Reference: RBD-2792

Tilt Sensor AT407

This AT407 basic tilt switch can easily be used to detect orientation. Inside the can is a ball that make contact with the pins when the case is upright. Tilt the case over and the balls don't touch, thus not making a connection. There are numerous uses for these basic sensors, but keep in mind you might need to use some debouncing code, as the sensor...

Reference: RBD-1914

Reed Switch Module

1 review

Working voltage 3.3V-5 Output format: digital switching output (0 and 1)A fixed bolt holes for easy installation