Reference: RBD-0176

Brand: SparkFun Electronics

Rover 5 Robot Platform 4 Motors 4 Encoders

Arduino Compatible Easy to assemble Adjustable gear box angles 4 independent DC motors 4 independent hall-effect encoders Thick rubber tank treads 10Kg/cm stall torque per motor

Reference: RBD-0196

Brand: DFRobot

APC220 Radio Communication Module

1 review

INTRODUCTION The APC220 radio module provides a  simple and economic solution to wireless data communications. Integrates an  embedded high speed microprocessor  and high performance IC that creates a  transparent UART/TTL interface, and  elminates any

Reference: RBD-0180

Brand: SparkFun Electronics

Makey Makey Kit

Description: This is the same product as the Makey Makey Standard Kit. The difference is this version comes in fancy clamshell packaging meant for our distributors that need it. Regular customers are welcome to order, but we want to limit the amount of extra packaging finding its way into the trash heap.

Reference: RBD-0215

IMAX B6-AC Charger/Discharger 1-6 Cells Dual Power 80W

8 reviews

AC 100~240v or 12V DC input The cables come with a fitted fuse. Microprocessor controlled Li-ion, LiPo, and LiFe capable Input voltage monitoring. (Protects car batteries at the field) Battery break-in and cycling feature Data storage (Store up to 5 packs in memory) Internal resistance checker to see pack health Delta-peak sensitivity Individual cell...

Reference: RBD-0711

UT61A Digital Multimeter

Auto range MAX/MIN/REL mode Auto power off LCD backlight Analog bar graph

Reference: RBD-0959

KK2.1.5 Multi-rotor LCD Flight Control Board With 6050MPU And Atmel 644PA

4 reviews

IC: Atmega644 PA Gyro/Acc: 6050MPU Input Voltage: 4.8V~6.0V AVR Interface: Standard 6 Pin Signal From Receiver: 1520us(5 channels) Signal to ESC: 1520 us

Reference: RBD-1111

Geiger Counter Kit Nuclear Radiation Detector Gamma Ray Build Radiation Monitoring Station

2 reviews

This is one open-source Geiger Counter project which could be used to detect nuclear radiation. The schematic and code and other helpful files are listed in this package. All the codes are designed and tested on this kit, these materials are useful for DIY Geiger Counter Kit Nuclear Radiation Detectors or Radiation Monitoring Stations. Note: The kit comes...

Reference: RBD-0264

Brand: SparkFun Electronics

Lockitron Mechanical Assembly

Lockitron Mechanical Assembly The Lockitron Mechanical Assembly from SparkFun is a perfect solution for the DIY home automation or Internet of Things (IoT) enthusiast, whether you want to make your life easier by not awkwardly fumbling with keys or add some extra security in your home with three-factor authentication.

Reference: RBD-0718

FlySky FS-CT6B 2.4GHz 6CH Transmitter With Receiver FS-R6B Mode 2

2 reviews

Model Type: Digital Radio Transceiver. Sensitivity: 1024. Bandwidth: 500 kHz. Default Operating Mode: Mode 2 (Left-Hand Throttle). No. of Channels: 6. Operating Voltage: 12V DC (1.5AA x 8 Battery) (not included).

Reference: RBD-1236

UNI-T UT383 Light Lux Meter

Ergonomic exterior, comfortable handling Large, multiple angle HD display Quick, auto calculation with real-time readout Multiple functions Auto power off after 3 minutes without operation  

Reference: RBD-1237

UNI-T Wind Speed Meter UT363BT

Ergonomic exterior, comfortable handling Millimeter accuracy  Large, multiple angle HD display Quick, auto calculation with real-time readout Multiple functions: measure wind speeds up to 30m/s, data storage, and more Auto power off after 3 minutes without operation  

Reference: RBD-1748

80W Soldering Iron Kit Set Multimeter with PU Bag

3 reviews

80W Soldering Iron Soldering Iron Kit Set with Multimeter PU Bag

Reference: RBD-0306

Torobot 32 Channel USB UART Servo Motor Controller

1 review

Baud rate (USB): 115200 Baud rate (bluetooth, UART): 9600 Storage Flash capacity: 16M Mode to choose: 4 types Simultaneous controlling servo number: 32 channel Max action groups: 256 groups Communication agreement: UART Cross platform operation, can support WindowsXP, WindowsVisit, Windows7, Windows8, Windows10, Linux,FreeBsd, MAC OS, Android

Reference: RBD-0812

High Accuracy I2C MAX30105 Particle Optical Sensor Photodetectors Oximeter Module

1 review

Based on MAX30105 – heart rate, oximeter, smoke sensor Green, red, and infra-red LEDs Interface: I2C (address 0x57) Compatible with 3.3V and 5V logic levels.

Reference: RBD-0907

UNI-T UT603 LCR meter

1 review

Resistance (Ω) 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/20MΩ Capacitance (F) 2nF/20nF/200nF/2uF/20uF/200uF/600uF Inductance (H) 2mH/20mH/200mH/2H/20H

Reference: RBD-1235

Laser Rangefinder UNI-T LM60

Ergonomic exterior, comfortable handling Millimeter accuracy  Large, multiple angle HD display Quick, auto calculation with real-time readout Physical leveler Multiple functions: Max/Min/continuous measurement, displacement calculation, data storage, and more Auto power off after 3 minutes without operation  

Reference: RBD-1837

EM5820 Embedded Thermal Receipt Printer 58MM Low Noise w/ USB/RS232/TTL Serial Port Support ESC/POS

2 reviews

58mm embedded thermal printer 60mm/s print speed Clear printing high efficiency Direct thermal printing

Reference: RBD-1228

ESP-350C-24V Power Supply

Input Power: 90-132VAC/180-264VAC,6.5A/4A,50/60Hz Output Power: 24VDC , 14.6A +Adjustable

Reference: RBD-0808

4 DOF Robotic Arm Acrylic DIY Unassembled

1 review

4 DOF Robotic Arm acrylic DIY unassembled Premium quality kit with wood cutting parts and screws Includes 4 MG90s servos for joint motion Untrammeled and flexible motion with 4 degrees of freedom

Reference: RBD-0953

S500 Glass Fiber Quadcopter Frame 480mm - Integrated PCB Version

2 reviews

High-Quality Carbon fiber Material Frame Comes With Landing Gear Power Distribution Board Pre Installed Easy to Assemble kit

Reference: RBD-1230

S-400-30 power Supply DC +30V 13A

AC Input 100-120VAC/6.8A /200-240VAC/4.2A DC Output +30VDC  13A

Reference: RBD-1037

SIM808 GPRS/GSM+GPS Shield

1 review

Quad-band 850/900/1800/1900MHz Inner MT3337 GPS receiver, -165dBm precision, control on a same serial port. Earphone/ microphone outputs on a card or external 32-ohm speaker + supports voice calls with an electret microphone. Sending and receiving SMS.

Reference: RBD-1661

Wireless Communication KIT for Arduino UNO

All in one kit for Arduino Based Wireless and IoT NRF wireless Transceiver Module Sim900 Shield Sim800L RF Transmitter and Receiver

Reference: RBD-1829

0-9999 Ohm Simple Resistance Box Precision Variable Decade Resistor Instrument PT-100 Simulator

0-9999 Ohm Simple Resistance Box Precision Variable Decade Resistor Instrument PT-100 Simulator Can be used to simulate PT-100 Sensor for calibration purpose 

Reference: RBD-2167

Skydroid 5.8G 150CH Full Channel UVC Dual Antenna Control Receiver OTG FPV Receiver

2 reviews

Skydroid 5.8G 150CH Full Channel UVC Dual Antenna Control Receiver OTG FPV Receiver Designed for Android phones with UVC support and OTG compatibility Dual antenna design for improved signal stability Channel waveform display and channel adjustment button added for convenience Supports audio playback through the app Automatic scanning mode activated by...

Reference: RBD-0553

FPM10A Optical Fingerprint Reader Sensor Modules (With Shield)

3 reviews

Supply voltage: DC 3.6 ~ 6.0V / 3.3V Supplying Supply Current: Current: <120mA Peak current: <140mA Fingerprint image time: <1.0 seconds

Reference: RBD-1139

PICKIT 3.5 Compatible Programmer / DebuggerPICKIT 3.5 Compatible Programmer / Debugger

1 review

Type: Debugger/Programmer Tool/Board Application: Debugging/Programming MCU Supported Families: Flash-based PIC MCUs Core Architecture: PIC, dsPIC

Reference: RBD-0872

Brand: Raspberry Pi Official

Raspberry Pi Zero 2 W

1 review

Affordable single-board computer with quad-core 64-bit CPU 40% more single-threaded performance and five times more multi-threaded performance than the original Raspberry Pi Zero 2.4GHz 802.11 b/g/n wireless LAN and Bluetooth 4.2 with support for Bluetooth Low Energy (BLE) microSD card slot, CSI-2 camera connector, USB On-The-Go (OTG) port, and...

Reference: RBD-2165

ENGINEER SS-02 Solder Sucker Desoldering Pump Japan

Made in Japan The solder sucker has a large capacity cylinder and silicone tube at the tip for improved suction Nozzle is heat-resistant silicone tube that will not damage the object Flexible nozzle adheres to substrate for improved suction Clog prevention function automatically cleans the nozzle

Reference: RBD-1607

MVV S-350-27 SMPS Power Supply

MVV S-350-27 SMPS Power Supply  Switch Mode Power Supply (Original) AC INPUT 100~240VAC DC OUTPUT 27V 13A Power supply unit has a built-in Fan on-off control circuit. Fan automatically works according to the working temperature.

Reference: RBD-1608

BR-435-27V SMPS Power Supply

BR-435-27V SMPS Power Supply  Switch Mode Power Supply (Original) AC INPUT 100~240VACDC OUTPUT 27V 16A This power supply unit has a built-in Fan on-off control circuit. The fan automatically works according to the working temperature.

Reference: RBD-2330

AS7343 Visible Spectrum Infrared Color Spectrometer Sensor

The AS7343 is a 14-channel highly versatile, multi-purpose spectral sensor enabling new consumer, commercial, industrial and laboratory applications. It is optimized for reflective, transmissive and emissive measurements including color matching, fluid or reagent analysis or general spectral reconstruction. The spectral response is defined by individual...