8*8 LED matrix module common anode of LED matrix

Reference: RBD-353

0.96" Inch I2C OLED Display Yellow

Size: 0.96 Resolution: 128X64 Color: Blue, Yellow Viewing angle: greater than 160 degrees Low power consumption: 0.04W during normal operation Support wide voltage: 3.3V-5V DC Working temperature: -30-80 degrees Volume: 27MM * 27MM * 4.1MM Driver IC: SSD1306 Communication: IIC, only two I / O ports Backlight: OLED self light, no backlight

Reference: RBD-1108

0.56 Inch 3 Digit 7 Segment LED Displays, Red Color

Digit height: 0.56 inch Dimensions: 50.3 x 19.0 x 8.0  mm Digit quantity: 3 Digit Available Emitting color: Red/Yellow Green/Yellow/Amber/Blue/White/Pure Green Surface color: Black/Gray (white epoxy) Epoxy colors: Red Polarity: Common Anode

Reference: RBD-1107

0.56 Inch 4 Digit 7 Segment LED Displays, Red Color

Digit height: 0.56 inch Dimensions: 50.3 x 19.0 x 8.0  mm Digit quantity: 4 Digit Available Emitting color: Red/Yellow Green/Yellow/Amber/Blue/White/Pure Green Surface color: Black/Gray (white epoxy) Epoxy colors: Red Polarity: Common Anode

Reference: RBD-1537

EL Wire-White 3m With Pocket Inverter

EL wire is a thin copper wire coated in a phosphor that glows a 360 degree unbroken light when an alternating current is applied to it. It is bendable as a thin neon tube which makes it ideal for flexible decoration. It is great for car decoration, parties, camping and so on.

Reference: RBD-384

MAX7219 Red Dot Matrix Module MCU Control Display Module DIY Kit For Arduino

Soldering is required

Reference: RBD-1342

LCD Display 16x2 with Female Header

LCD Display 16x2 with Female Header

Reference: RBD-1417

MAX7219 Dot Led Matrix LED Display Module

SMD-MAX7219-MODULE A single module can drive an 8 * 8 common cathode lattice Module Operating voltage: 5V. Module with input and output interfaces Supports multiple modules cascade Led color: Red 8x8 Dot Matrix Module - Cascadable, MAX7219

Reference: RBD-305

3.5 inch RPi Display

320×480 resolution Resistive touch control Supports any revision of Raspberry Pi (directly-pluggable) Compatible with Raspberry Pi A, B, A+, B+, 2B, 3B, 3B+,4B versions Drivers provided (works with your own Raspbian/Ubuntu directly) Size perfectly fits the Pi High quality immersion gold surface plating Supports Raspbian system, ubuntu system ,kali Linux...

Reference: RBD-1634

OLED Display Module 0.91 Inch

I2C OLED Display Module 0.91 Inch I2C OLED DC 3.3V~5V Display Module

Reference: RBD-1328

0.96" Inch I2C OLED Display White

Size: 0.96 Resolution: 128X64 Color: White Viewing angle: greater than 160 degrees Low power consumption: 0.04W during normal operation Support wide voltage: 3.3V-5V DC Working temperature: -30-80 degrees Volume: 27MM * 27MM * 4.1MM Driver IC: SSD1306 Communication: IIC, only two I / O ports Backlight: OLED self light, no backlight

Reference: RBD-947

Raspberry Pi HDMI Touch Display 5 Inch 800x480

This 5 inch TFT Display with Touch Screen is a mini panel-mountable HDMI monitor. So small and simple, but you can use this display with any computer that has HDMI output, and the shape makes it easy to attach to an electronic product. Although the 800x480 common HDMI display is made for Raspberry Pi, we can use it other where not only for Raspberry Pi.

Reference: RBD-1759

Brand: Waveshare

E-Ink Electronic E-paper Display Screen Module 200x200, 1.54inch

This is an E-Ink display module, 1.54inch, 200x200 resolution, with embedded controller, communicating via SPI interface, supports partial refresh. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on....

Reference: RBD-401

LCD Module 8x2 Characters Display

BLUE COLORThis little 8-character, 2-line parallel liquid crystal display is a generic equivalent of the Optrex DMC-50448N-AAE-AD LCD. It is incorporated into our Orangutan SV-328 robot controllers, some versions of our  A-Star 32U4 Prime microcontroller boards,  

Reference: RBD-1219

3.5inch Arduino Display-UNO

Product Description Supports development boards such as Arduino UNO and Mega2560 for plug-in use without wiring 480X320 resolution, clear display, support for touch function Support 16-bit RGB 65K color display, display rich colors 8-bit parallel bus, faster than serial SPI refresh On-board 5V/3.3V level shifting IC, compatible with 5V/3.3V operating...

Reference: RBD-235

Brand: SparkFun Electronics

Graphic LCD 128x64 STN LED Backlight

Description: This is a framed graphical LCD 64x128 with  LED backlight. This unit is a very clear STN type LCD with  a simple command interface. This new module includes the negative voltage circuitry on board!

Reference: RBD-1167

Raspberry Pi 7inch HDMI Touchscreen LCD with Case

7inch HDMI LCD (C), 1024×600, IPS, with Bicolor case Original Waveshare Included:  7inch HDMI LCD (C) x 1 HDMI cable x 1 HDMI to Micro HDMI Adapter x 1 USB type A plug to micro B plug cable x 1 RPi screws pack (4pcs) x 1 Bicolor Case for 7inch LCD x 1 Screws Pack x 1 Quick start sheet x1

Reference: RBD-914

Max7219 4 Channel Dot Matrix Display Panel

MAX7219 Dot Matrix Module Microcontroller 4 In One Display with 5P Line

Reference: RBD-159

LCD Keypad Shield for Arduino

LCD keypad shield for Arduino operates at 5V Includes a 2x16 LCD display and 6 momentary push buttons Use digital pins 4, 5, 6, 7, 8, 9, 10, and analog pin 0 to interface with the LCD Do not use Pin 10 while this shield is connected LCD color may vary (green or blue)

Reference: RBD-1218

Nextion NX8048T050 - 5.0" LCD TFT HMI Touch Display

Nextion is a seamless Human Machine Interface (HMI) solution that provides a control and visualization interface between a human and a process, machine, application or appliance. Nextion is mainly applied to Internet of thing (IoT) or consumer electronics field.

Reference: RBD-339

Brand: Waveshare

3.5inch Resistive Touch Display (B) for Raspberry Pi

3.5inch Resistive Touch Display (B) for Raspberry Pi, 480×320, IPS Screen, SPI

Reference: RBD-1539

EL Wire-Red 3m With Pocket Inverter

EL wire is a thin copper wire coated in a phosphor that glows a 360 degree unbroken light when an alternating current is applied to it. It is bendable as a thin neon tube which makes it ideal for flexible decoration. It is great for car decoration, parties, camping and so on.

Reference: RBD-1642

LCD 16x2 Blue Backlight

This is a basic 16 character by 2 line display with a blue background .

Reference: RBD-1332

I2C Graphic 128x64 LCD Adapter

This is I2C adapter for Graphic LCD 128x64, very suitable for interactive work with Arduino, Raspberry. In this adapter used driver MCP23017. For instruction and libraries you can find information here: www.gammon.com.au/forum/?id=10940 For change I2C adress you can folow infromation on bottom side of board.  Control of backlight: Normal backlight use...

Reference: RBD-661

Standard LCD 16x2

Standard LCD 16x2

Reference: RBD-1540

EL Wire-Blue 3m With Pocket Inverter

EL wire is a thin copper wire coated in a phosphor that glows a 360 degree unbroken light when an alternating current is applied to it. It is bendable as a thin neon tube which makes it ideal for flexible decoration. It is great for car decoration, parties, camping and so on.

Reference: RBD-399

Graphic LCD 84x48 (Nokia 5110) Black on White for Arduino

Specification:1. "LIGHT" linked with GND, the backlight to be lit.2. Need you to compress the screen and PCB tighter, might got loose after the delivery. 3. Use a 3.3V controller, otherwise the display could be quite vague.

Reference: RBD-1251

7 Inch TFT IPS Monitor for Raspberry Pi

7-inch TFT color monitor VGA HDMI 1024*600 for Raspberry Pi  TFT IPS LCD with 1024 X 600 resolution This is a 7-inch IPS LCD screen with a resolution of 1024 X 600 and can be used as a monitor for Raspberry Pi 3 and Raspberry Pi 4. It works with Raspberry pi easily does not require any additional modification of raspbian boot Image.

Reference: RBD-161

20x4 Character LCD

20x4 Character LCD

Reference: RBD-234

Brand: SparkFun Electronics

LCD Cape - pcDuino V3 (1024x600 7" LVDS)

Description: This is a 7" LVDS LCD Cape for the pcDuino V3  with a 1024x600 screen resolution and capacitive touch from  LinkSprite. This massive screen is a great addition for the  pcDuino V3 that compliments its extreme versatility as a mini  PC development platform. 

Reference: RBD-1164

LCD Display 16X2 with Header

This LCD comes with male header already soldered. So you don't have to worry about soldering it. You can straight connect it with the breadboard.