Reference: RBD-1354
Jumper Wire Single 20cm
Length: 8 inches/20 CM (Long) Material: Copper Plated Pin Spacing: 2.54mm.
Reference: RBD-1354
Length: 8 inches/20 CM (Long) Material: Copper Plated Pin Spacing: 2.54mm.
Reference: RBD-0351
Contactless transmission of data and supply energy (no battery needed) Operating distance: Up to 100mm (depending on antenna geometry) RoboticsBD Operating frequency: 13.56MHz Data transfer: 106 kbit/s Data integrity: 16 Bit CRC, parity, bit coding bit counting Anticollision Typical ticketing transaction: <100 ms ( including backup management)...
Reference: 0245
Choose your desire Resistor value from below:
Reference: 0031
3 Types Available (Please select from option) 1. Male to Male 2. Male to Female 3. Female-Female
Reference: RBD-0768
Size: 5mm Color: RED Head Shape: Round Lens Appearance: Transparent
Reference: RBD-0761
Breadboard friendly Mounting Style: Through Hole Mounting Direction: Vertical
Reference: 1353
Length: 12.5 inches/30 CM (Long) Material: Copper Plated Pin Spacing: 2.54mm.
Subcategories
Reference: RBD-0315
Working voltage: DC 5 V Static current: 3 mA Working temperature: 0 ~ + 70° Output way: GPIO Induction Angle: Less than 15° Detection range:2 cm to 400 cm Detecting precision: 0.3 cm + 1% Sensor size: Approx. 45 x 20 x 1.6mm Hole diameter: Approx. 1mm. RoboticsBD
Reference: RBD-1710
Type: Hexagonal coupling. Material: brass. Inner diameter: 6 mm. Total length: 18 mm. Size of Hex Socket(Long Diagonal): 14mm Weight: 12.6gm
Reference: RBD-1840
The DS1302 trickle-charge timekeeping chip module with battery backup A real-time clock/calendar and 31 bytes of static RAM. Communicates with a microprocessor via a simple serial interface. Real-time clock/calendar provides seconds, minutes, hours, day, date, month, and year information. Note: Batteries not included.
Reference: RBD-0951
This is a DC Mini Metal Gear Motor, ideal for making robots Lightweight, high torque and low RPM. Fine craftsmanship, durable, not easy to wear. With excellent stall characteristics, can climb hills easily. You can also easily mount a wheel on the motor’s output shaft.
Reference: RBD-0912
Model: 8020 Shaft Size: 1.0 mm Rated Voltage: 3.7 V. Rated RPM: 39000. Wire Length: 6cm Prop. Length: 55
Reference: RBD-1708
Type: Hexagonal coupling. Material: brass. Inner diameter: 4 mm. Total length: 18 mm. Size of Hex Socket(Long Diagonal): 14mm Weight: 13.6gm
Reference: RBD-1677
Contact Rating: 10 W. Switching Voltage: 220 V. Switching Current: 0.5 A. Breakdown Voltage: 220 VDC. Carry Current: 1 A. Contact Resistance: 100 mΩ.
Reference: RBD-1340
This is a DC Mini Metal Gear Motor, ideal for making robots Lightweight, high torque and low RPM. Fine craftsmanship, durable, not easy to wear. With excellent stall characteristics, can climb hills easily. You can also easily mount a wheel on the motor’s output shaft.
Reference: RBD-1346
Model: SG92R Weight: 9 gm Operating voltage: 3.0V~ 7.2V Servo Plug: JR Stall torque @4.8V : 2.5kg-cm
Reference: RBD-1341
This is a DC Mini Metal Gear Motor, ideal for making robots Lightweight, high torque and low RPM. Fine craftsmanship, durable, not easy to wear. With excellent stall characteristics, can climb hills easily. You can also easily mount a wheel on the motor’s output shaft.
Reference: RBD-2180
Testing hook clip multimeters test lead extension probe Safety handle and spring hook type alligator clip Converting connection for probes with whorl pattern Made of high quality material, durable to use and provide great performance Compact design, easy to carry
Reference: RBD-0563
Overcharging and Over Discharging Protection Short circuit protection: Yes Applicable assembly: Nominal 4.5V Batteries / 3 strings. RoboticsBD
Reference: RBD-1641
Product: GSM Antenna Color: Black SMA male straight 5cm 900-1800MHz radio antenna. Frequency: 900MHz – 1800MHz Maximum Power: 50W Length: 5cm/1.97 inch
Reference: RBD-2599
Connects two shafts with 4mm to 6mm diameters Rotates freely at any angle for flexible movement Durable and corrosion-resistant stainless steel construction M4 threaded ends for easy installation Chrome-plated finish for a sleek look
Reference: RBD-2600
Connects two shafts with 5mm to 6mm diameters Rotates freely at any angle for flexible movement Durable and corrosion-resistant stainless steel construction M4 threaded ends for easy installation Chrome-plated finish for a sleek look
Reference: RBD-2213
Operating voltage (v):DC 8 – 24V Chipset:TPA3118 Power output:60W Material:FR4
Reference: RBD-2601
Connects two shafts with 6mm to 6mm diameters Rotates freely at any angle for flexible movement Durable and corrosion-resistant stainless steel construction M4 threaded ends for easy installation Chrome-plated finish for a sleek look
Reference: RBD-2707
Securely mount your LDX servos (218 & 227) for robotics projects with these U-Shaped LDX Servo Brackets. Available in two sizes (Small & Short U-Shaped) for flexible servo placement. Lightweight plastic construction minimizes robot weight. Compatible with Hiwonder all series double-shaft servos.
Reference: RBD-1724
Operating voltage: DC4.5V-35V Output current: 0-5A Output power: 90W (max) PWM duty cycle: 1% -100%. PWM frequency:20khz Wide voltage DC motor speed controller.
Reference: RBD-1912
New L293D motor shield, the input voltage DC4.5-25V 600mA output current capability per channel 1.2A peak output current(non-repetitive) per channel Enable facility Overtemperature protection Logical “0” input voltage up to 1.5V(High noise immunity)
Reference: RBD-1545
Input voltage 9~40V Output: 5V Maximum output current 2A Efficiency: 76-90% Material: electronic component
Reference: RBD-0887
Rugged chrome-plated metal pushbutton with red LED ring Ideal for panels up to 1/2" thick Easy installation with a simple drill hole Built-in resistor for LED Supports 3 to 6V for LED operation Momentary pushbutton design
Reference: RBD-0888
Robust chrome-plated metal pushbutton with a bright green LED ring Ideal for panels up to 1/2" thick Simple installation with a straightforward drill hole Integrated resistor for LED operation Supports 3 to 6V for LED operation Momentary pushbutton design for effortless activation Versatile wiring options for the LED
Reference: RBD-0889
Rugged chrome-plated metal pushbutton with blue LED ring Ideal for panels up to 1/2" thick Easy installation with a simple drill hole Built-in resistor for LED Supports 3 to 6V for LED operation Momentary pushbutton design
Reference: RBD-0890
Rugged chrome-plated metal pushbutton with red LED ring Latching design for maintaining the switch state Built-in resistor for LED Supports 3 to 6V for LED operation IP65 and IK08 protection ratings Durable stainless steel and chrome-plated brass construction
Reference: RBD-1589
Solder cup configuration for longevity. Nickel-plated terminals. Gold plates pins. Good quality.
Reference: RBD-0891
Rugged chrome-plated metal pushbutton with red LED ring Latching design for maintaining the switch state Built-in resistor for LED Supports 3 to 6V for LED operation IP65 and IK08 protection ratings Durable stainless steel and chrome-plated brass construction
Reference: RBD-0892
Rugged chrome-plated metal pushbutton with red LED ring Latching design for maintaining the switch state Built-in resistor for LED Supports 3 to 6V for LED operation IP65 and IK08 protection ratings Durable stainless steel and chrome-plated brass construction
Reference: RBD-1676
L Shape 3.5Mm Right Angle Female To Male Plug Adapter Connector
Reference: RBD-1705
3A DC-DC Buck Step-down Converter Constant Voltage 5V Fixed Output Module
Reference: RBD-0125
Powerful and energy-efficient COB LED module emitting bright white light for various lighting applications. Easy installation with 3M self-adhesive backing for convenient placement. IP67 waterproof rating allows safe use in indoor or outdoor environments. Low voltage (24V DC) operation minimizes electrical risks and ensures safe handling.
Reference: RBD-1922
The Successful start of the drill requires three 15C-20C power battery, or six 10C-15C power battery (ordinary 18650 cannot start the drill!!) Strictly according to map wiring 0V, 4.2V, 8.4V, 12.6V, 16.8V, do not deliberately short circuit.