• How to Place an Order

  • bKash Payment Method

  • Nagad Payment Method

  • Request for Quotation/ International Sourcing

  • Order Status

Arduino Uno R3

Arduino UNO in Bangladesh The Arduino Uno is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller.

Price BDT 479
More
In Stock

EM4100 125kHz RFID Card

It is proximity ID card of 125KHz, EM4100. It has been specially manufactured and packaged to be clean from dust. And you can print any pictures on the PVC blank cards. You can use it with our RDM6300 RFID reader module.

Price BDT 18
More
In-Stock
All best sellers

Colored UV Resin 500mL Black

Anycubic

The ANYCUBIC resin is most suitable for the Photon /Photon S 3D printer.

The light source design, exposure time and other printing parameters of different brands of LCD 3D printers are different.The resin composition ratio of ANYCUBIC designed for the photon is special , it is the most consistent with resin photon print parameter.

BDT 2,990
Quantity
In-Stock

  • Store Pickup Available! Store Pickup Available!
  • Shipping Available Shipping Available
  • Free Ship Over 5000 BDT Free Ship Over 5000 BDT
  • Quality Product Quality Product
Description
  • Professional LCD molding resin. Optimize the formation of LCD low light source and printing efficiency is higher than the market compatible DLP / LCD / SLA resin. The resin is only designed for the LCD model of the resin, not recommended DLP or SLA machine.
  • High-speed solidify. This resin ensures the strength of molded parts and not excessive shrinkage, but also improve print speed, shorten the curing time and enhance the printing efficiency of LCD machines as much as possible.
  • Strong adhesion of the model and easy to detach after forming. Not only high success rate of printing and precision, but also to minimize resin release force and adhesion, so that the model attached to the forming platform can easily shovel and low viscosity makes it easier to clean the machine and model.
  • The material is rigid and tough. Strong material in the shovel model can easily lead to the model fragmentation, but too flexible material will be prone to the details of the print tensile deformation or fracture, which will affect the molding accuracy and aesthetics.
  • Model's performance is stable. The resin is stable under different climatic conditions and is also easy to store, overcoming the shortcomings of other resins easily damp softening and environmental corrosion

Parameter information: 

  • Main material: resin monomer & photo initiator
  • Exposure parameters: Bottom exposure time(s) 20-60s, normal exposure time(s) 5-15s

 Precautions: 

  • Storage method: 
  1. Keep away from light seals at room temperature. (Sunshine contains a lot of UV light, will solidify photosensitive resin. After testing, the light is not affected as long as it is not UV light).
  2. It is recommended to save at 15 ℃ -35 ℃ ambient temperature, the lower the temperature, the higher the viscosity of the resin. Sealed storage, excessive dust or moisture can affect print quality. Sunshine contains a lot of UV light, will solidify photosensitive resin. 
  • Usage: 
  1. Shake well before use, prohibiting the use of resin in places where there is a lot of sunlight.
  2. Wear gloves before use to avoid direct contact with the skin and keep the room ventilated.
  3. Inadvertent contact, as soon as possible to use a lot of water rinse. If you feel unwell, seek timely medical attention.
  4. Printed models need to use high-concentration alcohol to clean about 30S (recommended concentration of 95% or more, the higher the better).
  5. Do not pour the resin in the resin vat into the unused resin, do not leave the resin in the resin vat for a long time without use to avoid resin pollution affect the printing effect(long time without the resin can be introduced into airtight containers or sealed with plastic wrap shading save).
  6. Resin has a shelf life of up to 18 months

 

The ANYCUBIC resin is most suitable for the Photon /Photon S 3D printer.

The light source design, exposure time and other printing parameters of different brands of LCD 3D printers are different.The resin composition ratio of ANYCUBIC designed for the photon is special , it is the most consistent with resin photon print parameter.

Product Details
8 Items

Click here to leave a review

You might also like

Brand: Anycubic

Anycubic Photon Zero Resin 3D Printer

Technical Specifications ● Machine: Anycubic Photon Zero ● Technique: LCD-based SLA ● Light Source: 405nm ● XY Res.: 0.1155mm, 854*480p ● Z Axis Res.: 0.01mm ● Layer Res.: 0.01~0.2mm ● Printing Speed: 30mm(H)/hour ● Power: 30W ● Materials: 405nm UV resin ● Machine size: 180mm(L)*195mm(W)*367mm(H) ● Printing Volume: 97mm(L)*54mm(W)*150mm(H) ● Weight: ~4.7kg

Price BDT 29,990
More
In-Stock
18 other products in the same category:

DRV8825 Stepper Motor Driver Module

This breakout board for TI’s DRV8825 micro stepping bipolar stepper motor driver features adjustable current limiting, overcurrent and over-temperature protection, and six micro step resolutions (down to 1/32-step). It operates from 8.2 V to 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to...

Price BDT 199
More
In-Stock

Brand: Anycubic

Anycubic I3 Mega 3D Printer

"The Future is Now" 3D প্রিন্টার এখন পাওয়া যাচ্ছে রোবোটিক্স বাংলাদেশে। 3D প্রিন্টার কিনুন, আপনার পছন্দের 3D ডিজাইন তৈরি করুন অথবা ইন্টারনেট থেকে ডাউনলোড করুন। প্রিন্ট দিন মুহূর্তেই। যেকোনো জিনিস যেকোনো সময়ে। খুব সহজেই ভিডিও দেখে 3D প্রিন্টার এসেমব্লি করতে পারবেন।  The Anycubic i3 Mega is a solid, metal-framed 3D printer that comes mostly assembled....

Price BDT 34,999
More
Pre-Order

Makeblock XY-Plotter Robot Kit V2

XY plotter robot kit is a drawing robot, which is a pen or another instrument can move to digital graphics on flat surfaces. It can also be due to the installation of a laser engraver upgrade packs into a laser engraving device converted.

Price BDT 25,800
More
Pre-Order

mDrawbot kit

mDrawBot is a 4-in-1 drawing robot kit, it can be assembled into 4 different drawing robots: mScara, mCar, mSpider and mEggBot.

Price BDT 21,300
More
Last items in stock

Brand: Anycubic

Anycubic Photon Zero Resin 3D Printer

Technical Specifications ● Machine: Anycubic Photon Zero ● Technique: LCD-based SLA ● Light Source: 405nm ● XY Res.: 0.1155mm, 854*480p ● Z Axis Res.: 0.01mm ● Layer Res.: 0.01~0.2mm ● Printing Speed: 30mm(H)/hour ● Power: 30W ● Materials: 405nm UV resin ● Machine size: 180mm(L)*195mm(W)*367mm(H) ● Printing Volume: 97mm(L)*54mm(W)*150mm(H) ● Weight: ~4.7kg

Price BDT 29,990
More
Last items in stock

Nema 17 Stepper Motor 17HS4401S

General Specification: Nema17 Bipolar. Number of Phases: 2. Step Angle: 1.8°. Phase Voltage: 2.6Vdc. Phase Current: 1.7A. Resistance: 1.5Ω ±10%. Inductance: 2.8mH ±20% (1KHz). Number of Wire: 4 (100cm Length). Holding Torque: 43N.cm. Shaft Diameter: Ø5mm. Motor Length: 40mm. Mass: 270g.

Price BDT 1,190
More
In-Stock

A4988 StepStick Stepper Motor Driver Module

This breakout board for Allegro’s A4988 microstepping bipolar stepper motor driver features adjustable current limiting, overcurrent and over-temperature protection, and five different microstep resolutions (down to 1/16-step). It operates from 8 V to 35 V and can deliver up to approximately 1A per phase without a heat sink or forced air flow (it is rated...

Price BDT 350
More
In-Stock

Brand: Anycubic

Anycubic I3 Mega S 3D Printer

The Anycubic i3 Mega S is a solid, metal-framed 3D printer that comes mostly assembled. Assembly is easy and takes only a few minutes. It is capable of producing high-quality prints.Technical Specifications · Printing Technology: FDM (Fused Deposition Modeling) · Positioning Accuracy: X/Y 0.0125mm Z 0.002mm · Supported Print Materials: TPU, PLA, ABS,...

Price BDT 38,999
More
In-Stock

Follow us on Facebook