Reference: RBD-0268

Brand: RoboticsBD

3D Printed Robotics claw with servo motor

Description: Material: PLA (3D Printed)Claw max angle: 55mmLength: 108mmWidth: 98mm (streched)Color: Golden, Blue, Red Servo Motor: MG996R

Reference: RBD-0286

Arduino Uno R3 Bumper

4 reviews

3D Printed Arduino Uno R3 Bumper or base.Short Circuit Prevention: Safeguard your microcontroller against the risk of short circuits when placing it on a flat conductive surface. The bumper acts as a protective barrier, reducing the chances of accidental electrical contact. Note: Arduino Uno is not included

Reference: RBD-1626

Brand: RoboticsBD

Arduino Advance Learning Kit

32 reviews

Great for Starting with Arduino Programming A variety of components are included in this pack to try out different projects. The kit comes with quality components All-in-one kit, a great starter kit for learning to code. All Basis component to start is covered in kit You can create 15 different projects from this kit

Reference: RBD-0815

3D Pen 2nd Generation LED Display Screen with (6 Color Filament)

6 reviews

Input Voltage: 100-240 V AC. Temp: 160~230 Deg settable. Filament: 1.75 mm PLA or ABS. This 3D Pen is designed for the freehand drawing of 3-Dimensional objects Adjustable output speed, temperature Create projects horizontally or vertically Every 3d pen will be checked and tested on our lab before shipping, so you will not received "intact" package. No...

Reference: RBD-1541

37 In 1 Sensor Module Board Set Kit For Arduino with Box

4 reviews

For beginners who are interested in Arduino A complete set of Arduino’s most common and useful electronic components Infrared sensor receiving module Laser sensor module Temperature and humidity sensor module Infrared sensor module 5v relay module Obstacle avoidance sensor module.

Reference: RBD-1163

Robotics Arm EEZYbotARM MK1

The design intent was to make something "easy" to make robotics arm It uses Mini servos for driving the kinematics linkage and you can use Arduino and a decent power supply (2A) to program and drive it. All the pieces are 3DPrinted in PLA.

Reference: RBD-2069

All in One Motor Kit - 11 different motor set 3-9v DC motor

Round motor Vibration Motor Big toy motor Dynamo Motor Big solar motor Double Shaft toy motor Double shaft round motor DVD/Solar Motor Toy Motor, Double Shaft Geared Motor L Shaped Geared Motor

Reference: RBD-1683

PLA Filament for 3D Pen

3 reviews

Compatible with 3D pen 15gram-17gram 1.75mm Random Color

Reference: RBD-2066

RoboticsBD Ultimate Sensor Kit V1.0

1. 35 projects and 37 modules for you to learn basic knowledge about Arduino.2. With an elaborately-written user manual, providing more details, clear breadboard images and schematic diagrams, and thorough wiring descriptions so you can connect the components easily.  (You can download the PDF and code after the purchase)3. Code files are provided for...

Reference: RBD-0356

Abs Material 2 Axis Pan Tilt Camera Mount With MG90

1 review

PV Nylon Head Two Axial plastic Two axial platform Anti-vibration lightweight Good design and shape Net weight 20g Color : Black Material: Plastic.

Reference: RBD-2045

DIY D2-1 Intelligent Line follower/Tracking Smart Car Kit

Easy to Assemble comes as disassembled. Soldering is Required. Operating Voltage: 3V Line Map included Note: Batteries not included

Reference: RBD-1245

Soldering Iron Kit 21-in-1 with PU Bag

13 reviews

Soldering Iron Kit 21-in-1 with PU Bag by HANDSKIT Complete Soldering Kit: It includes the complete soldering tools for various uses, from home DIY, electrical repairs jobs and other soldering projects.

Reference: RBD-1364

Holder for 10 mm LED light strip

10 mm LED light strips. Attached with a nail or a screw.

Reference: RBD-0669

6 DOF Aluminium Mechanical Robotic Arm Clamp Claw Mount Robot Kit

4 reviews

Without Servo Motor & Servo Horn Material: Metal Color: black, as picture shows Function: clamping object

Reference: RBD-0251

Jumper Wire housing 3 Pin

1 review

Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 3 jumper wires (3-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.

Reference: RBD-0833

Soldering Kit

27 reviews

Soldering Iron KOOCU V501 25W Constant Temperature Electric Soldering Iron Soldering Stand Soldering Lead Solder Resin Wire Cutter Sucker

Reference: RBD-0117

Line Following Robot Kit 2021

3 reviews

Package Name: Line Following Kit Year: 2021 Arduino Uno  L298n motor shield Line Following Sensor 5 Array Breadboard medium Tp4056 with 1 cell holder (Charger)

Reference: RBD-0260

Jumper Wire housing 5 Pin

Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 5 jumper wires (5-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.

Reference: RBD-0262

Jumper Wire housing 6 Pin

Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 6 jumper wires (6-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.

Reference: RBD-1665

Beginners Kit with Arduino Uno R3

6 reviews

Great for Starting with Arduino Programming A variety of components are included in this pack to try out different projects. The kit comes with quality components assured by RoboticsBD All-in-one kit, a great starter kit for learning to code. Microcontroller ATmega328

Reference: RBD-0263

Jumper Wire housing 7 Pin

Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 7 jumper wires (7-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.

Reference: RBD-1666

Brand: RoboticsBD

Advanced Kit with Arduino Uno R3

3 reviews

All-in-one kit, a great starter kit for learning to code. Model Type: UNO Rev R3 Microcontroller Chip: ATmega328 Input Voltage(Recommended): 7-12V Operating Voltage: 5 Analog I/O Pins: 6 Digital I/O Pins: 14 (of which 6 provide PWM output)

Reference: RBD-0269

Jumper Wire housing 8 Pin

Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 8 jumper wires (8-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.

Reference: RBD-1662

Brand: RoboticsBD

Learning kit for Arduino Uno SMD

2 reviews

All-in-one kit, a great starter kit for learning coding. Microcontroller ATmega328 (SMD) – Interface CH340G Operating Voltage: 5V Input Voltage (recommended): 7-12V Input Voltage (limits): 5-20V Digital I / O Pins 14 (of which 6 provide PWM output) Analog Input Pins: 6

Reference: RBD-0127

Obstacle Avoiding Robot Kit

Obstacle Avoiding Robot Kit

Reference: RBD-1664

Brand: RoboticsBD

OTTO Programmable Robot Kit DIY

Open Source Design Compatible With Arduino IDE DIY Kit Easy to Assemble This is the DIY Kit, It comes with no coding, if you want Complete OTTO bot click here.

Reference: RBD-1111

Geiger Counter Kit Nuclear Radiation Detector Gamma Ray Build Radiation Monitoring Station

2 reviews

This is one open-source Geiger Counter project which could be used to detect nuclear radiation. The schematic and code and other helpful files are listed in this package. All the codes are designed and tested on this kit, these materials are useful for DIY Geiger Counter Kit Nuclear Radiation Detectors or Radiation Monitoring Stations. Note: The kit comes...

Reference: RBD-1550

MaKey MaKey - An Invention Kit for Everyone

INVENTION KIT FOR THE 21ST CENTURY Connect the world to your computer Invent Everywhere

Reference: RBD-1681

Jumper Wire housing 4Pin

1 review

3D printed Dupont connector for Jumper cable 4pin

Reference: RBD-1129

Brand: RoboticsBD

Otto Bot Complete

1 review

Complete Assembled  Plug and Play Open Source Design Compatible With Arduino IDE DIY Kit

Reference: RBD-2182

3D Printer Nozzle M7 Thread Brass 1.75mm

Filament Support: 1.75mm Material: High-quality brass Color: Brass color Screw outer diameter: M7 If you are not sure which Nozzle size to choose, Please check our guide in the documentation tab below. 

Reference: RBD-1216

TI MSP430 LaunchPad

14-/20-pin DIP (N) Socket 20 pin LaunchPad standard leveraging the BoosterPack ecosystem On-Board EZ-FET emulator featuring EnergyTrace™ technology Supports MSP430G2xx2, MSP430G2xx3, and MSP430F20xx devices in PDIP14 or PDIP20 packages 1 user buttons and 3 LEDs for user interaction