Motion Sensor based LED Light Lamp Holder

Reference: RBD-1210

OPT101P PHOTODIODE/AMPLIFIER

The OPT101 is a monolithic photodiode with on-chip transimpedance amplifier.The ingrated combination of photodiode and transimpedance amplifier on a single chip eliminates the problems commonly encountered in discrete designs, such as leakage current errors, noise pick-up, and gain peaking as a result of stray capacitance.Output voltage increases linearly...

Reference: RBD-664

ADXL345 Triple Axis Accelerometer Breakout

ADXL345 Triple Axis Accelerometer Breakout

Reference: RBD-272

Brand: Waveshare

Logic Level Converter

Logic Level Converter

Reference: RBD-689

LM75A IIC I2C High Accuracy Digital Temperature Sensor

LM75A IIC I2C High Accuracy Digital Temperature Sensor

Reference: RBD-823

Optical Sensitive Resistance Light Detection Photosensitive LDR Sensor Module

Optical Sensitive Resistance Light Detection Photosensitive LDR Sensor Module

Reference: RBD-321

PT100 Platinum Resister Temperature Sensor Waterproof Probe -20℃ ~ 450℃

PT100 Platinum Resister Temperature Sensor Waterproof Probe -20℃ ~ 450℃

Reference: RBD-674

MQ-5 Smoke Gas Detector Sensor

The MQ series of gas sensors use a small heater inside with an electrochemical sensor. They are sensitive to a range of gasses and are used indoors at room temperature. The output is an analog signal and can be read with an analog input of the Arduino.

Reference: RBD-104

6DOF MPU 6050 3 Axis Gyro

The MPU-6050 is the world’s first and only 6-axis motion tracking devices designed for the low power, low cost, and high performance requirements of smartphones, tablets and wearable sensors.

Reference: RBD-415

801S Vibration Sensor Module vibration Analog Output Sensitivity LM393

01S Vibration Sensor Module vibration Analog Output Sensitivity LM393Size: 41 * 15 * 12.5mm The main chip: LM393, vibrating probe Operating voltage: DC 3-5V Main features: Has a signal output instructions; With analog and TTL-level signal output signal; Output valid signal is high, the light goes out; Adjustable sensitivity (fine-tuning); Vibration...

Reference: RBD-314

Double-ended 50cm Cable Crocodile Clips

 Double-ended 50cm Cable  Crocodile Clips 5 colour available Red, Black, White, Green, Yellow.

Reference: RBD-1377

CJMCU-4541 MICS-4514 Carbon Monoxide Nitrogen Oxygen Sensor CO/NO2/H2/NH3/CH4

CJMCU-4541 MICS-4514 Carbon Monoxide Nitrogen Oxygen Sensor

Reference: RBD-424

Si7021 Industrial High Precision Humidity Sensor I2C Interface for Arduino

Features: Precision Relative Humidity Sensor± 3% RH (max), 0–80% RHHigh Accuracy Temperature Sensor±0.4 °C (max), –10 to 85 °C0 to 100% RH operating rangeUp to –40 to +125 °C operating rangeWide operating voltage (1.9 to 3.6 V)

Reference: RBD-1192

Hall Effect Sensor 6851/A3144

Hall Effect Sensor 6851/A3144

Reference: RBD-1197

TSOP38236 IR Receiver

The TSOP38236 is a miniaturized receiver for infrared remote control systems. A PIN diode and a preamplifier are assembled on a lead frame, the epoxy package acts as an IR filter. The demodulated output signal can be directly decoded by a microprocessor.

Reference: RBD-291

Sound Sensor Module for Arduino

Sound Sensor Module for Arduino

Reference: RBD-816

VL6180 VL6180X ToF Range Finder Sensor

2.8V Regulator - Provides the required 2.8V for the sensor I2C Level Shifter - Provides logic level conversion from 2.8V to VCC 3-in-1 Module IR Emitter Range Sensor Ambient Light Sensor Measures absolute range up to 10cm Gesture Recognition I2C Interface Two Programmable GPIO Sharp Sensor Board Layout **PCB might be different from the picture as per stock

Reference: RBD-678

MQ-9 Gas Leakage Detection Sensor

Gas Sensor(MQ9) module is useful for gas leakage detection (in home and industry). It is suitable for detecting LPG, CO, CH4. Due to its high sensitivity and fast response time, measurements can be taken as soon as possible. The sensitivity of the sensor can be adjusted by using the potentiometer.

Reference: RBD-568

Raspberry Pi Camera Module V2 - 8 Megapixel,1080p

Camera Module Features: 8 megapixel camera capable of taking photographs of 3280 x 2464 pixels Capture video at 1080p30, 720p60 and 640x480p90 resolutions All software is supported within the latest version of Raspbian Operating System

Reference: RBD-663

TTP223B Digital Touch Sensor Capacitive Touch

Specification: The module is based on a touch-sensing IC (TTP223B) capacitive touch switch module. In the normal state, the module output low, low power consumption; When a finger touches the corresponding position, the module output high, if not touched for 12 seconds, switch to low-power mode. Features: Low power consumption Power supply for 2 ~ 5.5V DC

Reference: 1738

Active Speaker Buzzer Module for Arduino 5V

Active Speaker Buzzer Module for Arduino 5V

Reference: RBD-426

GUVA-S12SD UV Detection Sensor Module

GUVA-S12SD UV Detection Sensor Module Light Sensor 240nm-370nm For Arduino  

Reference: RBD-312

Arduino TTP229 16 Channel Digital Capacitive Switch Touch Sensor Module GM

Arduino TTP229 16 Channel Digital Capacitive Switch Touch Sensor Module GM

Reference: RBD-1173

Non-invasive AC current Sensor Split Core Current Transformer SCT-013-000

Model: SCT013 Frequency: 50HZ-150KHZ Retractable transformer SCT-013 Rated Input Current : 100A Model : SCT-013 Rated Input Current : 60A / 100A

Reference: RBD-659

Digital Line Following Sensor - 8 Array

Digital Line Following Sensor - 8 Array. TCRT 5000 8 Array Line Detect Sensor, Single calibration variable/pot. Easy to Calibrate Optional I2C Mode (Require only 4 Wire)  Sample Programming Code is available.

Reference: RBD-150

5mW Adjustable Laser Dot Diode Module

5mW Adjustable Laser Dot Diode Module Features: 1. Output Power: 2-5mW2. Wavelength: 650nm3. Working Voltage: 3v - 5v4 .Laser Shape: Dot5. Working temperature: -10 C-40 C

Reference: RBD-1191

IR Receiver Shielded

IR Receiver Shielded 3 Pin

Reference: RBD-554

GY-VL53L0XV2V VL53L0X Time-of-Flight Distance Sensor Breakout Module

The VL53L0 uses ST’s FlightSense technology to precisely measure how long it takes for emitted pulses of infrared laser light to reach the nearest object and be reflected back to a detector, so it can be considered a tiny, self-contained lidar system. This time-of-flight (TOF) measurement enables it to accurately determine the absolute distance to a target

Reference: RBD-151

Angle Sensor Module for Arduino SW-520D

Angle Sensor Module for Arduino High-sensitivity angle sensor SW-520D Comparator output, clean signal, great waveform, strong driving ability, more than 15mA Distribution positioner sensitivity adjustment Working voltage: 3.3V~12V Output form: Digital switching output (0 and 1) With fixed bolt hole for easy installation

Reference: RBD-668

DS1302 Real Time Clock Module (DS1302Z clock chip,32.768KHZ crystal)

DS1302 Real Time Clock Module (DS1302Z clock chip,32.768KHZ crystal)

Reference: RBD-1207

Line Following Sensor 5 Array

5-channel tracing module analog output, analog output and distance, object color-related.